Contents

The Best 12V Poe of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 12V Poe of 2023. Check our ranking below.

2,150 Reviews Scanned

SaleRank No. #1

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC Plug Cable(PS5712TG)

Support international standard IEEE802.3 af & IEEE802.3at(30W); POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at.
PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module
Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection
12V 2A power output, easy to access Poe network for non-PoE terminal
1500V high voltage isolation.

SaleRank No. #2

Bawofu Active PoE Power Over Ethernet Splitter Adapter 48V to 12V, 5.5x2.1mm DC, IEEE 802.3AF/at Compliant 10/100Mbps PoE Splitter with 12V Output for Surveillance Camera CCTV & VoIP Phone, 2 Pack

Adaptive 10/100Mbps network data transmission: This poe splitter compatible with IEEE802.3-AF/AT transport protocol uses six types of all-copper cables for real-time data transmission without jamming
Input Power Voltage: Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance DC44-57V from poe switch or poe injector, deliver power up to about 100m (328 feet).The maximum power consumption is 15.4W, and the POE input voltage range is 48V-57V. 5.5x2.1mm DC Plug Cable. DC Jack(Male) output DC voltage is 12V and the maximum output DC current is 1.2A
Plug-and-Play - Require no configuration: A simple solution to expand your network to where you wish to place network devices but has no power outlet, powerline ethernet adapter
Easy to install and operate: Any device which connects to a network via an ethernet cable,needs only one cable connection to power and operate if you use PoE.POE makes installation simpler and less expensive, helps to scaling up networks and adding new connections and devices. POE splitter can make non-POE device works via POE.Say goodbye to the wiring annoyance of multiple lines by simply connecting one network cable to transmit data and power at the same time
Typical application areas include malls, hospitals, companies, parking lots, urban streets, residential buildings, etc. M2C mode sales, the powerful production capacity of background factories, while ensuring capacity and quality, directly give the buyer (consumers), so that the buyer can buy high performance-price ratio products, so that the buyer can buy with confidence

Rank No. #3

V-Fiabilidad 1000Mbps PoE Ethernet Power Supply 2 Port POE DC 12V-48V Power Adapter Injector with 15cm 2.1mm 12V 5A Connector Plug Cable for IP Camera 802.3af/802.3at Device

Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use. This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan.
This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices like DAHUA, HIKVISION and other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices.
Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V.
Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V.

Rank No. #4

[UL Listed] iCreatin 12V Power Over ethernet PoE Injector and PoE Splitter kit, Extension Power for 12 Volt 12 watt Devices with 5.5x2.1 mm DC Jack

Includes 12V 12watt power adapter (UL listed) power for the injector.
12 volt Power up to 30M/100ft via Ethernet, both data and power share the same cable
support 10@Mbps network device, Transforms Non PoE devices to PoE enabled
Use with 12v IP security camera, wireless access point and other 12V devices
For more ports items, please check our other amazon listings

SaleRank No. #5

LINOVISION Industrial 5 Ports Gigabit Solar POE Switch with DC12V-48V to DC48V Voltage Booster,4 x IEEE802.3af/at 30W POE Ports @120W, IP40, Compact POE Power for Solar Power/RV Truck/VoIP Systems

DC12V-48V POE SWITCH: Support DC12V-48V input and standard IEEE802.3af/at POE output with built-in voltage booster. (Noted: Only Mode B POE output is supported, if your POE Device is Mode A, pls buy 8 port POE Switch: ASIN B089LGKZQR)
5-PORT FULL GIGABIT POE SWITCH: Provide 4 IEEE802.3af/at 30W POE ports and 1 Gigabit uplink; All ports 10/100/1000Mbps self-adaptive full duplex; Total POE budget 120W (DC24V/DC48V input) or 60W (DC12V input).
INDUSTRIAL DESIGN: Compact IP40 rugged metal enclosure; Wide working temperature (-40 ℉ to 176 ℉); Support DIN-Rail & Wall Mount
NON-STOP POE SUPPLY WITH DUAL POWER INPUT: Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system. Compatible with Mode B POE outputs only.
APPLICATIONS: Standard POE supply in solar power system (DC12V/DC18V/DC36V input), RV/Vehicle/Truck/Bus (DC12V input), VoIP/Access control systems (DC24V input).

Rank No. #6

axGear Passive Power Over Ethernet PoE Adapter Injector+ Splitter Kit 5v 12v 24v 48v

Main Material: Plastic, Electric Parts
Transforms Non PoE devices to PoE enabled
The product are widely used for WLAN, routers, switches, internet telephony, security monitoring etc
Compact design and easy to install,very convenient
Transforms Non PoE devices to PoE enabled;Use with IP security camera, wireless access point and other devices

Rank No. #7

ANVISION 4-Pack 12V DC Output Active PoE Splitter Adapter, IEEE 802.3af, 10/100Mbps, for IP Camera AP Voip Phone and More, AV-PS12

Output Power: DC 12V 1.5A 18watts Max., full IEEE 802.3af compliant.
Input Power Voltage: DC 44-54V
Data Rate: 100/100Mbps; DC Jack: 5.5*2.1mm
Works with IP camera, IP phone, AP and other 12V Non-PoE devices
Package content: 4x PoE splitters

Rank No. #8

PoE Texas 12 Volt PoE+ - IEEE 802.3at - Splitter Splits Power Over Ethernet to 12v DC & Gigabit Data with Opto-Isolation Protection for 12v 25w Devices, Tablets, Single Board Computers, PTZ Cameras

Convert and split PoE+ or Power over Ethernet into 12 volt DC power up to 25 watts and Gigabit data using this PoE+ splitter. Power 12 volt Single Board Computers, Tablets, and IEEE 802.3at PTZ Cameras with PoE at 12 volts.
Use this gigabit splitter device with your existing 802.3at PoE+ switch or 48v PoE injector to power 12 volt non-PoE devices. Try it with our 48v 60w injector to provide 25 watts of continuous 12 volt power to any device.
This 12v power splitter with mounting tabs is perfect for mounted powering of non-PoE devices at a distance up to 328 feet away and capable of offering a more secure network via direct Ethernet. Compatible with Arduino, Echo Dot 3, Arlo Pro Base Station, Foscam, and more.
Our network-friendly inline 12v splitter deploys opto-isolation technology to isolate and protect devices, with optional mounting tabs to enhance security of installations. Delivers 10/100/1000 Gigabit data on the RJ45 port with a 2.1mm x 5.5mm female DC connector.
All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.

Rank No. #9

POE Splitter Adapter 12V, Active Power Over ethernet Splitter 48V to 12V, IEEE 802.3af/at Compliant 10/100Mbps up to 100 Meters for Surveillance Camera CCTV and Wireless AP, 2-Pack

【Non-PoE to PoE+】PoE splitter to split the PoE signal into 12V power supply and 10/100M Ethernet source in RJ45 so that non-PoE devices can be powered over Ethernet located up to 100 meters (328 ft.) away. It’s a perfect solution for devices that don't support PoE in a PoE environment.
【12V/1-2A & 10/100Mbps】Split POE signal in 12V DC power and 10/100Mbps Ethernet data; Output Power: 12V/1-2A, 15.4W(IEEE 802.3af), 25.5W(IEEE 802.3at). Plug Output: Data (1,2+/3,6-)
【Triple Protection】Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection, 1500V high voltage isolation.
【Widely Application】Support international standard IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af, IEEE 802.3 at, compatible with DC voltage 44-57V standard POE switches. Plug and play, available with IP camera/phone, wireless AP and other 12V Non-POE devices for home, ffice, factory, mall, warehouse, etc.
【What You Get】2x Fiberssky Active POE Splitter, 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support. If you have any further questions or queries, please feel free to contact us.

SaleRank No. #10

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use.
This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices
This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable
This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan.
Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V.

Rank No. #11

Gigabit PoE Splitter 12V 1A Output, IEEE 802.3af Standard Compliant 10, 100, 1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC Plug (PS5712G)

Support international standard IEEE802.3 af(13W); POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af.
12V 1A power output, easy to access Poe network for non-PoE terminal
Support 37V-57V voltage transmission, Automatically detects power supply from PSE power supply module. PD module industrial grade temperature and lightning protection, 7000 hours high frequency low resistance long life capacitor.
Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection. 1500V high voltage isolation.
Overvoltage Protection, Short Circuit Protection, Overcurrent Protection, Overheating Protection.

Rank No. #12

Gigabit Active PoE Power Over ethernet Splitter Adapter 48V to 12V, DC Jack 5.5x2.1mm, IEEE 802.3af/at Compliant 10/100/1000Mbps PoE Splitter with 12V Output for Surveillance Camera CCTV & VoIP Phone

Output Power: 12V/1A, 15.4W, DC Jack: 5.5*2.1mm. full IEEE 802.3af/at compliant. Widely use with most 12-volt devices.
Input Power Voltage: DC 44-57V standard POE switches, overvoltage protection.
Data Rate: 100/100/1000Mbps, widely used with 802.3af/at PoE switch at 10/100 or gigabit speeds.
Plug and play, no configuration required; Available with IP camera, IP phone, wireless AP and other 12V Non-POE devices.
Package content: 1 x PoE splitters. Ipolex Gigabit Active PoE Adapter are thoroughly tested to ensure premium quality. Ipolex provides exclusive FREE 1-year warranty and lifetime technical service.

Rank No. #13

Elenzk Industrial Gigabit PoE++ Injector Hardened IEEE802.3at/bt 95W PoE Adapter with 12-48VDC Input DIN-Rail and Wall Mount

PoE output: 95W Max.
PoE Standard: IEEE802.3 af/at/bt.
Support 10/100/1000 Base-T, DIN-Rail / Wall-mount installation.
Industrial Grade PoE injector. Operating temperature: -40℃ to 80℃ ( -40℉ to 176℉).
The PoE adapter can be used in harsh environment, with design of 6KV lightning protection.

Rank No. #14

10Gtek POE Splitter Cable 100Mb/s 155Mb/s, 802.3AT/AF, 48V to 12V (PSE chip Inside), 100 Meters Link (2-Pack)

【High Performance】10Gtek Power over Ethernet Splitter splits a PoE network cable from a PoE switch into a separate power and 100M Ethernet source, this is ideal for devices that don't support PoE in a PoE environment.
【12V/1A & 10/100Mbps】Split POE signal in 12V DC power and 10/100Mbps Ethernet data; Output Power: 12V/1A, 15.4W, IEEE 802.3af compliant power supply equipment (PSE) requirements; Plug Output: Data (1,2)/(3,6).
【Multiple Protection】Power over Ethernet IEEE 802.3af/at compliant, compatible with DC voltage 44-57V standard POE switches, overvoltage protection, short-circuit protection and overcurrent protection, it is more safe.
【Widely Application】Eliminates the need for a power supply or for a camera to be located near a power outlet. Available with IP camera, IP phone, wireless AP and other 12V Non-POE devices for home, school, office, park, factory, mall, warehouse, etc.
【What You Get】 2x 10Gtek Active POE Splitter, 1x Product Manual. Backed by 10Gtek 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support.

Rank No. #15

DSLRKIT Gigabit 802.3at 24Watt Active PoE Splitter 48V to 12V 2A Power Over Ethernet

Compliant with IEEE802.3at
Compliant With 2.5KV isolation

Rank No. #16

ANVISION 4-Pack Gigabit PoE Splitter, 48V to 12V 2A Ethernet Adapter, for Security Camera, AP, Voip and More, AV-PS12-G

OUTPUT: 12V DC power output ( 12V 2A, 24watt Max. plug sIze: 5.5mm x 2.1mm), 10/100/1000Mbps ethernet data
INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector, deliver power up to about 100m (328 feet)
PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet
APPLICATION: works with non-PoE network devices that have a 12V DC input and a ethernet input, such as IP Camera, AP, router, voip and more
WARRANTY: 2 years warranty and unlimited technical support, Package content: 4x gigabit PoE splitter

Rank No. #17

ANVISION Active 48V to 12V Waterproof PoE Splitter Adapter, IEEE 802.3af Compliant 10/100Mbps for IP Camera AP Voip Phone and More, White

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max.
Main body is made of waterpoorf desgin (one-piece injector molding)
Data Rate: 100/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant
Available with IP camera, Voip phone,wireless AP and other 12V Non-PoE devices
Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

Rank No. #18

ANVISION 4-Pack Active 48V to 12V PoE Splitter Adapter, Plug 5.5mm x 2.5mm, IEEE 802.3af Compliant 10/100Mbps

Input Voltage: DC 44-56V
Output Power: DC 12V 15.4W Max.
Full IEEE 802.3af compliant
Data Rate: 10/100Mbps, DC Jack: 5.5mm x 2.5mm
Available with IP camera, Voip phone, AP and other 12V Non-PoE devices

Rank No. #19

ANVISION 2-Pack Active 48V to 12V Waterproof PoE Splitter Adapter, IEEE 802.3af Compliant 10/100Mbps, for IP Camera AP Voip Phone and More, White

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max.
Main body is made of waterpoorf desgin (one-piece injector molding)
Data Rate: 10/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant
Available with IP camera, Voip phone, AP and other 12V Non-PoE devices
Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

Rank No. #20

ANVISION 4-Pack Active 48V to 12V Waterproof PoE Splitter Adapter, IEEE 802.3af Compliant 10/100Mbps, for IP Camera AP Voip Phone and More, White

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max.
Main body is made of waterpoorf desgin (one-piece injector molding)
Data Rate: 100/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant
Available with IP camera, Voip phone, AP and other 12V Non-PoE devices
Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

Last update on 2023-08-11 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 12V Poe?

Do you get stressed out thinking about shopping for a great 12V Poe? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 12V Poe, which is why we have assembled a comprehensive list of the greatest 12V Poe available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 12V Poe that you consider buying. Your questions might include the following:

Is it worth buying an 12V Poe?
What benefits are there with buying an 12V Poe?
What factors deserve consideration when shopping for an effective 12V Poe?
Why is it crucial to invest in any 12V Poe, much less the best one?
Which 12V Poe are good in the current market?
Where can you find information like this about 12V Poe?

We’re convinced that you likely have far more questions than just these regarding 12V Poe, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 12V Poe, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 12V Poe. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 12V Poe buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 12V Poe currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 12V Poe has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 12V Poe?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 12V Poe.
Customer Ratings: Number ratings grade 12V Poe objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 12V Poe.
Product Quality: You don’t always get what you pay for with an 12V Poe, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 12V Poe is should be an indication of how long it will work out for you.

We always remember that maintaining 12V Poe information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 12V Poe is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Do all Ethernet cables support Poe?

A: Technically, yes. Now, that does not mean that any Ethernet cable is best suited for this. When using PoE the best practice, especially if the cable will be 50ft or longer, is to use solid copper conductor Ethernet cable.

Q: What is a 12V DC power outlet?

A: A 12V socket is a cylindrical receptacle that provides direct current (DC) at 12 volts to a device plugged into it. The most commonly known 12V sockets are found in automobiles, and were originally provided as part of a system that heated a metal coil in a heat-proof holder to light cigars and cigarettes.

Q: What is power over Ethernet (PoE)?

A: Power over Ethernet (PoE) is a technology for wired Ethernet local area networks ( LANs) that allows the electrical current necessary for the operation of each device to be carried by the data cables rather than by power cords. Doing so minimizes the number of wires that must be strung in order to install the network.

Q: What does a PoE injector do?

A: A POE injector, a device also commonly known as a “midspan,” introduces or injects power onto an Ethernet cable. The injector adds power to data that is coming from a non-PoE switch or “endspan.” It has an external power supply. Injectors allow admins to populate and properly support LANs with both compliant and noncompliant devices.