The Best 4 pin to 2 pin fan adapter of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 4 pin to 2 pin fan adapter of 2023. Check our ranking below.
2,498 (random number) Reviews Scanned
- Sold as a 2-pack set, these adapter cables allow you to connect 3-pin and 4-pin PC fans to mini 2-pin JST XH 2.5/2.54mm headers, suitable for use in power supplies, networking devices, and other electronics utilizing this connector.
- Connector Specifications: Features a 2-Pin Female Mini JST XH Connector (2.5/2.54mm pitch), with Pin 1 designated for Positive Voltage (Red) and Pin 2 for Ground (Black), the most common wiring configuration.
- Compatibility Check Required: Given the lack of standardization for XH 2-pin fan connector wiring, some users may need to swap the pins on the mini connector for proper functionality.
- Professional Build Quality: RoHS compliant with all-black connectors and high-density PET sleeving, these cables offer durability and a clean look with reduced wire visibility.
- Total cable length (including connectors): 4.0 inches (10cm)
- Sold as a 2-pack, these adapter cables allow you to connect a mini 2-pin fan to a traditional PC fan header.
- Output: 2-pin male mini fan connector (0.984" / 2.5mm pitch XH-series) Pin 1: Positive Voltage (Red) Pin 2: Ground (Black)
- Note: the XH 2-pin fan connector wiring is not standardized across all devices and swapping the pins on the mini connector may be necessary for a very small portion of users.
- The cables are constructed with all black connectors and high density sleeving for minimal wire visibility.
- Cable length (excluding connectors): 5" / 12cm
- Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer
- 4 Pin Molex (Actual 2-Pin) to 2 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable
- Power two 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector
- High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin fans, Fans will be operated at the fixed Molex voltage of 12V
- 2 Pack 4-Pin Molex to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power (Molex-3Pin/4Pin Cable (Splitter))
- Connect graphics card fans, pumps, and other devices with the micro 4-pin fan connector to a standard PC 4-pin PWM fan header.
- The micro 4-pin (PH series, 2.0mm pitch) connector is the most common wire-to-board connector on most modern graphics cards.
- This is a direct pass-through cable. Fan tachometer and PWM signal for speed control are supported.
- Constructed with all black connectors and high density sleeving for minimal wire visibility.
- Cable length (including connectors) is 12 inches (30cm)
- Triple Fan Connection Solution: 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header; PWM splitter cable connects an additional fan to increase airflow in your computer case; Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
- Unified PWM Control: PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans; PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
- Synchronized Speed Management: CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans; 3 pin fan splitter omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
- Spare Cable Convenience Pack: Cost-effective 2-pack of computer fan splitter 4 pin cables provides a spare cable for adding a fan to increase cooling in your computer; Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
- Wide Compatibility for Enhanced Cooling: 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans; Add more cooling to your computer with this PWM fan splitter cable.
- 15 pin SATA to 2 x 2 Pin 12V PC case fan splitter Y power adapter cable works with 3 pin / 4 Pin
- Power two 3pin or 4pin PC case fan with a 15pin SATA connector
- High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin / 4-pin fans
- Fans will be operated at the fixed SATA voltage of 12V
- 2 Pack SATA to 2 x 2 Pin 12V PC Case Fan Power Adapter Cable works with 3 Pin / 4 Pin, 2-Pin to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable Support 3 Pin / 4 Pin
- Graphic Card GPU Fan micro 4-pin Adapter Splitter Cable to 2 PWM Fan
- Color: Black , Length: 4 inch / 10cm
- Compatible with 3-pin and 4-pin PWM Fans
- This is one input micro 4-pin GPU to two output 3-pin and 4-pin PWM Fan.
- The PWM 2 output connectors, one is for Master fan 4-pin with PWM speed control and another is Slave Fan 3-pin. Both output connectors are compatible with 4-pin and 3-pin fans, however, just the PWM signal from Master fan gets connected to GPU connector.
- 15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable
- Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector
- High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans
- Fans will be operated at the fixed SATA voltage of 12V
- 2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable
- Product name: 15 pin SATA to 2 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable
- Power two 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
- Package quantity: 2pcs
- High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans
- Fans will be operated at the fixed SATA voltage of 12V.
- Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer, because only 2-pin in connector required for fixed Molex operated voltage of 12V.
- Molex to 4 pin fan adapter supports 3Pin or 4Pin PC cooling fans.
- Powers up to four PC chassis fans via molex connectors to provide internal chassis cooling.
- Cable length is 27cm / 10.6 inch, quality high density black sleeving for all black appearance.
- Connector A: 4 pin molex connector (actual 2 pin) B: 3pcs 4 pin fan connector(actual 2 pin)
- This micro 4-pin adapter cable allows you to connect standard 3-pin and 4-pin PC fans to your graphics card and other computer devices.
- Graphics cards with the micro 4-pin (PH2.0mm) connector expect a full 4-pin fan supporting PWM speed control. 3-pin fans and devices like AIO pumps will operate at full speed (which may be preferred in some scenarios).
- RoHS Compliant. The cable is constructed with all black connectors and high density sleeving for minimal wire visibility.
- Total cable length (including connectors) is 6 inches (15cm)
- Notice: Our 4-Pin Molex is actual 2-Pin but it still works fine on your computer, because only 2-Pin is required for 12V PC fans. Our fan splitter adapter cables used to power PC case fans, does not support PWM speed regulation.
- Package: You will get 2PCS of Molex to 3pin / 4pin fan adapter cables.
- Connector A: 4-Pin (actual 2-Pin) IDE Molex connector; Connector B: 4 x 3-Pin / 4-Pin PC case fan connectors.
- Cable Length: 30cm / 11.8inch. Material: High quality black sleeved cable.
- Function: Use one Molex plug to power up to 4pcs 3pin or 4pin computer PC case fans, money saving and help you organize your PC case cables. (Fans will be operated at the fixed Molex voltage of 12V).
- This Molex 4Pin to 3/4 Pin Cable mainly to extend and expand the motherboard 3Pin/4Pin interface.
- One 3pin or 4pin for PC case fan with a 4-pin Molex connector.
- Compatible with standard 3-Pin 4-Pin fans, Fans will be operated at the fixed Molex voltage of 12V.
- Please note this 4-Pin Molex is actual 2-Pin because Molex port power supply only , and it will works well on your computer.
- Length:10.6’’ 27cm.
- Excellent 4-pin PWM 1 to 3 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
- Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
- Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
- Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
- Package contents: 2 black 10.6 inch 1-to-3 splitter fan power supply extension cables, male to female connector plug.
- 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header; PWM splitter cable connects an additional fan to increase airflow in your computer case; Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans
- Black sleeved nylon braided cable, more concise and durable
- CPU fan extension:This cost-effective of 4 pin fan splitter cables provide the more spare cable for adding fans to increase cooling in your computer case to ensure the operational speed of CPU.
- CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans; 3 pin fan splitter omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans
- Package: 2x Fan Power Adapter Cable
- This Cable Is 5v USB Port to Small 3-Pin / 4-Pin Fan Cable with Switch
- It Allows You to Power Most Case Fans by Using a USB Connection, 3pin or 4pin Case Fan Power Adapter Cable Both
- You Can Turn On/Off Any Time by Switch
- Fan Must Have a Start Voltage at or Below 5v (Fans with a Higher Start Voltage Will Not Work), 12v Fans Will Be Operated at a Reduced 5v Voltage for Silent Operation.
- Power any standard 3-pin or 4-pin PC fan with a DC power supply.
- The DC input measures 5.5mm x 2.1mm which is the most common barrel plug size, ensuring compatibility with a wide range of power supplies.
- Most computer fans require 12V for full speed operation but lower voltages like 5V and 9V can be used to achieve quieter operation.
- The cable is designed to a high standard with 22 AWG wiring and injection molded components for durability.
- Total cable length (including connectors) is 6 inches (15cm)
- SATA to 3 x 3 pin / 4 pin pwm 12V pc case fan power adapter cable,use 15 pin sata connection power supply to power,for 3 x 3pin or 4pin (pwm connector) pc chassis fans, which can reduce the load of the motherboard, increase the service life of the motherboard, and ensure the PWM speed regulation function.
- SATA 15pin to 3 pin / 4 pin pwm 12V pc case fan power adapter cable,motherboard can only provide the accurate speed measurement value of one fan, so only one 4pin fan has pwm speed regulation function
- SATA to 3pin 4pin fan adapter compatible standard 3-pin and 4-pin fans,when 3pin fan is inserted no speed regulation function, only have pwm function,fans will be operated at the fixed voltage of 12V
- Input: 15-pin sata male sata connector typically used in pc for power Output: three 3/4-pin male fan connectors
- High quality black sleeved cable,24AWG, tinned copper conductor,length is approx 27cm/10.5 inches
Last update on 2024-05-22 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best 4 pin to 2 pin fan adapter?
Do you get stressed out thinking about shopping for a great 4 pin to 2 pin fan adapter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 4 pin to 2 pin fan adapter, which is why we have assembled a comprehensive list of the greatest 4 pin to 2 pin fan adapter available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 4 pin to 2 pin fan adapter that you consider buying. Your questions might include the following:
- Is it worth buying an 4 pin to 2 pin fan adapter?
- What benefits are there with buying an 4 pin to 2 pin fan adapter?
- What factors deserve consideration when shopping for an effective 4 pin to 2 pin fan adapter?
- Why is it crucial to invest in any 4 pin to 2 pin fan adapter, much less the best one?
- Which 4 pin to 2 pin fan adapter are good in the current market?
- Where can you find information like this about 4 pin to 2 pin fan adapter?
We’re convinced that you likely have far more questions than just these regarding 4 pin to 2 pin fan adapter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 4 pin to 2 pin fan adapter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 4 pin to 2 pin fan adapter. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 4 pin to 2 pin fan adapter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 4 pin to 2 pin fan adapter currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 4 pin to 2 pin fan adapter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 4 pin to 2 pin fan adapter?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 4 pin to 2 pin fan adapter.
- Customer Ratings: Number ratings grade 4 pin to 2 pin fan adapter objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 4 pin to 2 pin fan adapter.
- Product Quality: You don’t always get what you pay for with an 4 pin to 2 pin fan adapter, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 4 pin to 2 pin fan adapter is should be an indication of how long it will work out for you.
We always remember that maintaining 4 pin to 2 pin fan adapter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 4 pin to 2 pin fan adapter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- 8 pin to 6+2 pin pcie adapter
- 30-pin to 8-pin lightning adapter with audio
- 3 Pin To Molex Fan Adapter
- 3 Pin To 2 Pin Converter
- 9 Pin Female To 15 Pin Male
- Laptop Screen 30 Pin To 40 Pin Converter
- 4 Pin Flat To 7 Pin Round
- 4 Pin Flat To 7 Pin Round
- Belkin Firewire 9 Pin To 4 Pin
- Belkin Firewire 9 Pin To 4 Pin