Contents

The Best 700R4 Transmission Rebuilding Tools of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 700R4 Transmission Rebuilding Tools of 2023. Check our ranking below.

2,890 Reviews Scanned

Rank No. #1

Bonbo Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions.
1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions.
Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation.
Direct Replacement – 1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M.
Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones.

SaleRank No. #2

WnSEu Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

Turbine Shaft Teflon Seal Installer/Resizer Fit for 700R4 / 4L60 / 4L60E / 4L65E / 4L70L 1982 - UP. Replace for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long & T-1574-M.
Stator Shaft Teflon Seal Installer/Resizer Fit for Transmissions GM - 700-R4, for GM - 4L60, for GM - 4L60E, for GM - 4L65E, for GM - 4L70E. Similar to Atec Trans-Tool T-1503.
urbine Shaft Teflon Seal Installer/Resizer used to re-size and install all short and long (300mm) type input shafts. Protect the Teflon seal ring from deformation during installation
Turbine Shaft Teflon Seal Installer/Resizer used to protect the Stator Shaft Teflon seals from being damaged when installing. Used to installs both seals.
Made of high quality aluminum alloy

Rank No. #3

Streetside Tools SST-0151 - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse) Compatible with GM 250, 350, 4T80-E, 700-R4, 4L60, 4L60E, 4L65E, 4L70, 4L70E / Replacement for Atec T-0151

This tool will remove the Low/ Reverse clutch piston in the rear of the case.
Makes removing the clutch spring retainer easy.
The whole process takes just a few minutes.

Rank No. #4

Bonbo 700R4 Turbine Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - Up

Wide Application – For use on these GM transmissions: 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP. This tool will seat all 4 ring seals.
Great Function – This tool will RE-SIZE and INSTALL all SHORT and LONG (300mm) type INPUT SHAFTS. It will effectively protects the Turbine Shaft Teflon seals from damage, tear and distortion during installation.
Direct Replacement – Alternative to Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M both in function and performance.
Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones.
Satisfaction Guarantee – If you're not satisfied with the tool, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service.

Rank No. #5

Alignment Tool Accurate SST-1097 Front Pump Alignment Tools Automotive Anti-rust Transmission Tools Compatible with GM 250/250C/350/350-C/375/400/3L80/3L80-HD/425/475/700R4/4L60/4L60E Transmission

【Front Pump Alignment Tool】The alignment tool could help to reconstruct the G.M front pump to ensure that the pump cover is aligned with the pump body and can meet most of your front pump alignment needs. Replacement for OEM part number: SST-1097. Replacement for other part number: T-1097
【Accurate Alignment & Easy to Use】Front pump alignment tool comes with a quick-adjustable wing nut to help you achieve precise calibration and easy to use.
【Widely Compatible with GM Transmissions】Front pump alignment tool is compatible with a wide range G.M transmissions, including 250, 250C, 350, 350-C, 375, 400, 3L80, 3L80-HD, 425, 475, 700-R4, 4L60, 4L60E transmissions and compatible with powerglide transmissions. Compatible for Chevrolet, G.MC, B.uick, C.adillac, H.olden, H.ummer, O.ldsmobile, P.ontiac, S.aab. About the specific model and year of the vehicles, please refer to the details page below.
【Anti-rust & Durable Alignment Tools】Front pump alignment tool is made of high quality stainless steel, which is durable and anti-rust, providing you with long service life.
【High-quality Service】We aim at trying our best to offer you the best product and services to make you unworried before/after the purchase. If you have any questions or doubts, our professional technical team will help you solve the problem within 24 hours.

Rank No. #6

ATSG 700-R4 Update Handbook GM Transmission Repair Manual (700R4 Transmission Rebuild Kit 700R4 Torque Converter 700R4 Shift Best Repair Book Available!)

Step-by-Step Solution to Repair, Overhaul or Rebuild of GM 700-R4
High Quality Charts Available for GM 700-R4
Valve Body Identification, Electrical Diagrams, Wiring Harness Locations
Assembly, Dis-assembly, Diagnosis, Troubleshooting, Electronic Controls & Operation
Very Detailed Explanation For Easy Repair

SaleRank No. #7

GM Automatic Overdrive Transmission Builder's and Swapper's Guide (Sa Design)

automotive-diagnostic-tools
Ruggles, Cliff (Author)
English (Publication Language)
128 Pages - 09/30/2008 (Publication Date) - CarTech (Publisher)

Rank No. #8

Kujunpao Clamp Kit Automatic Transmission Front Pump Alignment Tool Compatible with GM GMC Buick Cadillac Holden Humme Pontiac Saab 9-7X 4L60E 700R4

Work fit for 250, 250C, 350, 350-C, 375, 400, 3L80, 3L80-HD, 425, 475, 700-R4, 4L60, 4L60E and PowerGlide Transmissions.
The clamp kit is made of stainless steel, which can be accurately aligned and adjusted quickly.
This tool is used to center the pump on most transmissions to ensure that the pump cover is aligned with the pump body.
With wing nut, it is easy to use and can be adjusted quickly.
Package includes one clamp kit .

Rank No. #9

T-0151 Rear Clutch Spring Compressor Transmission Tool for GM 250, 250C, 350, 350C, 700R4, 4L60 & 4L60-E (Low & Reverse)

FITMENT: For GM 250, 250C, 350, 350C, 700R4, 4L60 & 4L60-E, this tool will remove the Low/ Reverse clutch piston in the rear of the case
USING: The tool engages the lugs and pushes the piston return spring enough to access the snap ring, which makes removing the clutch spring retainer easy
SUPERIOR QUALITY: Constructed from high quality Steel. It features its durable construction and wide applicability
REPLACEMENT: Similar to SST-0151
SATISFACTION GUARANTEE: If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty

Rank No. #10

MOEBULB Turbine Shaft Teflon Seal Installer Resizer Transmission Tool Compatible with GM 700R4 4L60 4L60E 4L65E 4L70L 1982 to UP

Compatible with : GM 700R4 4L60 4L60E 4L65E 4L70L 1982 to UP This tool can only be used with the solid Teflon ring seals.
Replace for : Similar to Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long & T-1574-M.
Material : Made of high quality Aluminum alloy, sturdy and durable, corrosion-resistant, high temperature resistance. never break like the pastic one.
Function : Both the installer and the re-sizer are designed to allow both the long shaft and the short shaft to pass through the tool . can re-size and install all short and long (300mm) type input shafts. This one tool will seat all 4 ring seals. Re-sizer prevents improper seal installation.Protect the Teflon seal ring from deformation during installation.
Package included : 1pcs Turbine Shaft Teflon Seal Installer ,1pcs Resizer Transmission Tool

Rank No. #11

Streetside Tools SST-1097 - GM - Front Pump Alignment Band Automatic Transmission Tool

Made in the USA!
This tool helps with rebuilding GM Front Pumps to make sure the Pump Cover is aligned with the Pump Body.
Our heavy duty all-metal Alignment Bands are constructed of Stainless Steel for accurate alignment and long life.
Simple to use, with a wing nut that allows fast adjustment.
Covers a wide range GM Transmissions, and come ready to solve most of your Front Pump Alignment needs.

Rank No. #12

Replace for GM Shift Lever Seal Installer Remover Transmission Tool ，Turbo 400 350 300 700-R4 4L60 Includes Seal

【Removal and installation】: There is no need to remove the transmission disc, or in most cases, it is not even necessary to lower the gearbox.
【High quality】 using high quality steel rubber, performance is guaranteed, long life.
【Compatible with】Fits for gm200, 200C, 200-4R TURBO 350, 350C TURBO 400, 425, 475 gm700-R4 gm4L60 gmAllison - 540，includes Seal.
【Easy to install】. In most cases, the gasket can be removed and inserted, so you don’t have to worry about removing the gearbox or lowering the gearbox.
【after-sale warranty】- If you're not 100% satisfied with this Replacement Part, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 18 months Warranty.

Rank No. #13

Haocute T-0158-HD Universal Clutch Drum Spring Compressor Tool Heavy DutyMultifunctional Transmission Clutch Drum Spring Tool, Compatible with Ford, Chrysler, GM

10mm Thick Steel and 6"long Legs-The fixed legs are made of 10 mm thick steel strong enough to bear great pressure. 6"long legs designed to fit for deep drums
Fit For-Build for rebuilding, modifying, and repairing automatic transmissions.Suitable for most Clutch Drums.Compatible with Turbo-hydramatic - 180/180C; for Turbo hydramatic - 375/400 (3L80) /425/475; for Ford - C4, C5 & C6; for Ford - AOD/AODE; for Ford - ATX; for Chrysler - Torqueflite "6" (904) (30RH); for Chrysler - Torqueflite "8" (727) (36RH); for GM - 700-R4
Heavy Duty-Made from premium and solid steel,impact resistance and anti-corrosion quality ensure long term use
Function as Atec Trans-Tool T-0158-HD do. Need to drill holes to mounts to work bench or on a bench vise
Risk-free buy-If you are not satisfied with our adjustable clutch drum spring compressor too,just return it for rufund within 30 days

Rank No. #14

E-cowlboy T-0220-700R4 Master Bushing Driver Set for GM 700-R4 4L60 4l60E 4L65E Transmissions Bushing Bearing Seal Installer Remover Tool Kit (13 PCS)

Great Compatibility — Fit for GM 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions.
Include — 12 Bushing Drivers (#61-71) and one Driver Handle. Each part is manufactured to OEM specifications and testing.
Perfect Design — Replacement for Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. More efficient and easy removal and instalation of bushings on all the above automatic transmissions to save your time and money.
Superior Quality — Advanced CNC machined heavy duty solid steel with black anodizing, strong and durable, anti-impact and anti-corrosion. High precision and hardness to provide a much longer service life.
100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!

Rank No. #15

CNRAQR Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

【Excellent Alternative】J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions.1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions.
【Protective Function】This tool will effectively protect the stator or turbine shaft seals from damage, tear, and distortion during installation. Replacing and resizing the aluminum alloy shaft seals on a 4L60E transmission is better than plastic.
【High Quality Material】Made of good quality aluminum alloy material which is strong strength, anti-rust and durable to use.
【Easy Installation】1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M.
【Quality Service】We provide a Two-month Return Service，When You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Rank No. #16

Bonbo T-0151 Rear Clutch Spring Compressor Transmission Tool - 4L60E Low & Reverse Spring Compressor, Compatible with GM 250 250C 350 350C 700R4 4L60 4L60-E 4L65E 4L70 4L70E 4T80-E

【Wide Application】Fits for GM 250 250C 350 350C 700R4 4L60 4L60-E 4L65E 4L70 4L70E 4T80-E transmissions.
【High Performance】This Clutch Spring Compressor Tool is specially designed to remove the Low/ Reverse clutch piston in the rear of the case, allows you easily and properly remove the clutch spring retainer easy. Comparable to T-0151 both in quality and functions.
【Convenient to Use】This low and reverse spring compressor tool engages the lugs, can push the piston return spring enough to access the snap ring. The whole process takes just a few minutes.
【Superior Material】Bonbo Rear Clutch Spring Compressor is crafted from top quality carbon steel, high strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. Has undergone extensive testing, meet or exceed the OEM specifications. High precision and hardness ensure long term reliable service.
【100% Satisfaction Guarantee】If you're not satisfied with this T-0151 Rear Clutch Spring Compressor for GM Transmissions, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!

Rank No. #17

Transmission Shifter Seal Remover & Installer Tools Set with Seal Compatible with GM 4L60E 4L80E 4LC65E 4L70E

【Application】Fits for 4L60E 4LC65E 4L70E 4L80E; Fits for GM Chevy Cars and Trucks with V6 and V8 transmissions 1996 and newer; Fits for Impala C1500 C2500 C3500 K1500 CT4/5/6 Camaro etc.
【Must Have Tool】Special tools must be used to remove the leaking seal around the shifter selector shaft mechanism through the transmission case.
【High Performance】This handy tools set will help you easily & properly remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.
【Package Includes】1 x Shifter Gear Selector Rod Seal, 1 x Steel Construction Threaded Remover and 1 x Steel Installer Dowel Tool. This perfect set works with transmissions that have the electrical shift position switch around the transmission shift selector which requires a longer tool to remove and replace the seal.
【100% Satisfaction Guarantee】If you're not satisfied with this Transmission Shifter Seal Remover Installer Tools Kit with Seal, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!

Rank No. #18

Bonbo T-0158 Universal Clutch Drum Spring Compressor Transmission Tool Heavy Duty Steel

Wide Application – For use on universal transmissions and will fit most common clutch drums up to 6" in size. To check more applicable models, please refer to the description below.
Great Function – Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work. (Attention: Does not do rear case pistons)
Considerate Design – 6" long legs especially designed for deep drums. Similar to Atec Trans-Tool T-0158-HD. Mounts to work bench or table or on a bench vise.
Superior Quality – Made of premium and wear resistance steel, sturdy, impact resistance and anti-corrosion for much longer service time.
Satisfaction Guarantee – If you're not satisfied with the tool, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service. Put us to the test! Click on the "Add to Cart" button NOW and get this helpful product!

Rank No. #19

ATSG 4L60E /4L65E Update Handbook GM THM Transmission Update Repair Manual (4L60E Transmission Rebuild Kit - 4L60E Shift Kit 4L60E Valve Body - Best Repair Book Available!)

Step-by-Step Solution to Repair, Overhaul or Rebuild of 4L60E / 4L65E Transmission
High Quality Charts Available for 4L60E / 4L65E
Valve Body Identification, Electrical Diagrams, Wiring Harness Locations
Assembly, Dis-assembly, Diagnosis, Troubleshooting, Electronic Controls & Operation
Very Detailed Explanation For Easy Repair

Rank No. #20

MOEBULB Front Pump Alignment Band Automatic Transmission Tool Compatible with GM 250/250C/350/350-C/375/400/3L80/3L80-HD/425/475/700-R4/4L60/4L60E

Compatible with GM these Transmissions : 250/250C/350/350-C/375/400/3L80/3L80-HD/425/475/700-R4/4L60/4L60E and PowerGlide Transmissions.
Material：Made of hight quality Stainless Steel for accurate alignment, Durable and long life, and not rust.
Front Pump Alignment Band Automatic Transmission Tool with a wing nut that allows fast adjustment. It is simple to use.
The Front Pump Alignment Band Automatic Transmission Tool Covers a wide range Transmissions , helps with rebuilding Front Pumps to make sure the Pump Cover is aligned with the Pump Body.can solve most of your Front Pump Alignment needs.
Package included : 1 x Front Pump Alignment Band Automatic Transmission Tool

Last update on 2023-08-17 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 700R4 Transmission Rebuilding Tools?

Do you get stressed out thinking about shopping for a great 700R4 Transmission Rebuilding Tools? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 700R4 Transmission Rebuilding Tools, which is why we have assembled a comprehensive list of the greatest 700R4 Transmission Rebuilding Tools available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 700R4 Transmission Rebuilding Tools that you consider buying. Your questions might include the following:

Is it worth buying an 700R4 Transmission Rebuilding Tools?
What benefits are there with buying an 700R4 Transmission Rebuilding Tools?
What factors deserve consideration when shopping for an effective 700R4 Transmission Rebuilding Tools?
Why is it crucial to invest in any 700R4 Transmission Rebuilding Tools, much less the best one?
Which 700R4 Transmission Rebuilding Tools are good in the current market?
Where can you find information like this about 700R4 Transmission Rebuilding Tools?

We’re convinced that you likely have far more questions than just these regarding 700R4 Transmission Rebuilding Tools, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 700R4 Transmission Rebuilding Tools, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 700R4 Transmission Rebuilding Tools. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 700R4 Transmission Rebuilding Tools buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 700R4 Transmission Rebuilding Tools currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 700R4 Transmission Rebuilding Tools has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 700R4 Transmission Rebuilding Tools?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 700R4 Transmission Rebuilding Tools.
Customer Ratings: Number ratings grade 700R4 Transmission Rebuilding Tools objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 700R4 Transmission Rebuilding Tools.
Product Quality: You don’t always get what you pay for with an 700R4 Transmission Rebuilding Tools, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 700R4 Transmission Rebuilding Tools is should be an indication of how long it will work out for you.

We always remember that maintaining 700R4 Transmission Rebuilding Tools information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 700R4 Transmission Rebuilding Tools is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What’s the difference between the 700R4 and the 4L60E?

A: The 700R4 and the 4L60E are the same. The only difference is you need a computer to control the 60e. The clutch packs, bands, and steels are all the same. If it’s going in a 3rd gen, you’ll probably want a 4L60E.

Q: How many quarts of fluid does a 700R4 hold?

A: 700R4 holds 12 qts total and takes about 5 qts with a filter change BUT this is only a general guide, you must you the dipstick to determine the required amount. through all gears. Let ENG slow idle in PARK for at least 3 minutes. Check fluid level and add fluid as needed. Do not overfill.

Q: What year is my 700R4?

A: Well. The 700r4 Transmission came in the year 1982 . The 700r4 and the 200-R4 transmission replaced the TH350 transmission in that year. The TH350 was a 3 geared transmission without the last overdrive gear.