13 Best Power Acoustik 2,500 Watt Monoblock Amp Specs 2023 – Romance University
After hours of researching and comparing all models on the market, Romance University finds out the Best Power Acoustik 2,500 Watt Monoblock Amp Specs of 2023. Check our ranking below.
2,238 Reviews Scanned
- Class D
- Small, Compact 4.75" chassis
- Mosfet PWM power supply
- 2300-Watt max power, 900-Watt RMS at 4-ohm, 1400-Watt RMS at 2-ohm
- 2 ohm stable class D Monoblocks
- MOSFET PWM power supply
- 1-ohm stable monoblock operation for MAX power
- Bridge 2 monoblocks together for double power
- Military-grade PCB with PWM MOSFET power supply
- Direct short, thermal, and overload circuit protection
- High/speaker level and low level/RCA input
- 1 ohm minimum impedance Class D monoblock operation
- 8,000 watts max power
- 850 watts RMS x 1 at 4 ohms
- 1,400 watts RMS x 1 at 2 ohms
- 2,600 watts RMS x 1 at 1 ohms
- Package Dimensions: 13.97 cms (L) x 43.18 cms (W) x 5.588 cms (H)
- Product Type: Car Audio Or Theater
- Package Quantity: 1
- Country Of Origin: China
- Features: Power Acoustik RE1-3000D 3000 Watt Mono Car Amplifier. Monoblock (1 Channel) Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 3000 Watts. 4 Ohm RMS: 750 Watts
- 2 Ohm RMS: 1500 Watts. Direct Short, Thermal, & Overload Circuits Protection. 200mV-6V High Level or Low Level RCA Input. Variable 12dB High, Low, & Subsonic Crossovers
- 12dB Bass Boost Increases Low Octave Harmonics. Direct Wire 4ga. Power & 12ga Speaker Terminals. Dash Mounted Remote Gain Control. Product Dimensions (L x W x H): 14" x 8.5" x 2.2" inches
- GUTS: A military grade SMT PCB is the playground for an awesome set of MOSFET audiophile grade IRTM transistors. This power supply maintains dynamic performance in this car stereo amplifier. The 1 channel amps are protected by direct short, thermal, and overload circuits protection. This is one solid amplifier.
- Connect: Adjustments include a variable 12dB/Octave low pass, & subsonic crossovers. Enjoy 200mV-6V low level RCA inputs, high level inputs w/ Signal Sense auto turn-on. Terminals attached include 4g power wire & 8g speaker wire connectors. The 12dB bass boost increases low octave harmonics.
- SPECS: With mutli configuration potential, the entire series allows for various applications. The VA1-10000D is definitely 1 ohm stable and peaks at 10,000 watts max. Enjoy 1 ohm stability at 3,500w, or configure at 2 ohm with 2,000w of power, and finally 4 ohm at a smooth 1,200w.
- 1-ohm Stable Monoblock Operation for MAX Power
- Military Grade PCB w/ PWM MOSFET Power Supply
- Direct Short, Thermal, & Overload Circuit Protection
- 12dB Bass Boost Increases Low Octave Harmonics
- Variable 12dB High & Low Pass Crossovers
- DESIGN: A compact 5” chassis design makes it easy for installation versatility. A new vented top plate makes this subwoofer amp the apple to any car audio enthusiast’s eye. Draped in grey and finished in aggressive orange, the look is in.
- SPECS: With mutli configuration potential, the entire series allows for various applications. The SB1.7500D is definitely 1 ohm stable and peaks at 3,000 watts max. Enjoy 1 ohm stability at 2,500w, or configure at 2 ohm with 1,600w of power, and finally 4 ohm at a smooth 1,000w.
- GUTS: A military grade SMT PCB is the playground for an awesome set of MOSFET audiophile grade IRTM transistors. This power supply maintains dynamic performance in this car stereo amplifier. The 1 channel amps are protected by direct short, thermal, and overload circuits protection. This is one solid amplifier.
- Connect: Adjustments include a variable 12dB/Octave low pass, & subsonic crossovers. Enjoy 200mV-6V low level RCA inputs, high level inputs w/ Signal Sense auto turn-on. Terminals attached include 8g power wire & 8g speaker wire connectors. The 12dB bass boost increases low octave harmonics.
- SIZE: Compact build allows for anywhere installation. Just over 13.75 inches in length, 5 inch width and 2 inch height. Small is the new BIG in the car stereo amplifiers.
- Direct Short, Thermal, & Overload Circuit Protection
- High/Speaker Level & Low Level/RCA Input
- Variable 12dB High & Low Pass Crossovers
- 2 ohm minimum impedance Class D monoblock operation
- 1,600 watts max power
- 200 watts RMS x 1 at 4 ohms
- 360 watts RMS x 1 at 2 ohms
- Frequency response: 15 Hz to 500 Hz
- Power filter function is through the power line access power filter.
- Get a specific frequency of the power signal, or eliminate a specific frequency power signal.
- By using this feature of the power filter, a square complex or complex noise passing through the power filter can be converted into a sine of a specific frequency.
- How It Works The mains filter is a passive bi-directional network with end of the mains power supply and the other end of the mains filter.
- Power Filter Internal Circuit The principle of a power filter is - Impedance Adaptation Network: The greater the impedance mismatch between the input and output sides of the power filter and the power and load sides, the more effective the attenuation of electromagnetic interference.
- MAX Power 5,000 Watts; RMS @ 1Ω, 14.4V = 1 x 2,500 (1Ω); RMS @ 2Ω, 14.4V = 1 x 1,700; RMS @ 4Ω, 14.4V = 1 x 1,100
- Dimensions 2.25″H x 8.5″W x 13.25″ Long
- Easy DIY Install Single Sided Terminals & Controls. Angled Wire Terminals Secure Wire Connections.
- Variable 12dB High Pass, Low Pass, & Subsonic Crossovers; 200mV-6V Low Level RCA Inputs, 4g Power Wire & 8g Speaker Wire Outputs, 12dB Bass Boost Increases Low Octave Harmonics
- MOSFET Power Supply w/ Audiophile Grade IRTM Transistors, Military Grade SMT PCB Maintains Dynamic Performance, Direct Short, Thermal, & Overload Circuits Protect Amplifier. Kindly refer the User Guide (Mandatory) before use.
- Class D
- Small, Compact 4.75" Chassis
- Mosfet Pwm Power Supply
- High-level Input
- Dim: 1.63"h X 4.75"w X 12.25"d
- Rockville RVA-M2 2500w Peak/625w Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote. Metal Bass Remote Included. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
- 1 Ohm: 625 Watts(<1% THD @ 14.4 Volts) (70.2% efficient). 2 Ohm: 440 Watts (<1% THD @ 14.4 Volts) (82.4% efficient). 4 Ohm: 264 Watts (<1% THD @ 14.4 Volts) (83.7% Efficient). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
- 1 Ohm: 2500 Watts. High-Speed MOSFET Power Supply. Class D Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 32Hz - 300Hz. Subsonic Filter: 10Hz - 50Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry.
- Adjustable 0-12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S/N Ratio: >90dB. Under Voltage Protection at 9V. Over Voltage Protection at 16V. Radiation cooling keeps the amp running at high volumes for hours straight.
- Extruded aluminum heatsink. Frequency Response: 10Hz - 300Hz. Damping Factor: >150 @ 100Hz. Fuse: 30A*2. Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money. Dimensions: (L x W x H) 13" x 8.5" x 2.24". Weight: 7 lbs
- 2-ohm Stereo & 4-ohm Bridged Full Range Operation
- 1-ohm Stable Monoblock Operation for MAX Power
- Bridge 2 Monoblocks Together for Double Power!
- 200mV-6V Low Level RCA Inputs
- 1800 Phase Shift Improves Low Octave Dynamics
- 1500-Watt max power, 600-Watt RMS at 4-ohm, 900-Watt RMS at 2-ohm
- 2-Ohm stable class D Monoblocks
- MOSFET PWM power supply
Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Power Acoustik 2,500 Watt Monoblock Amp Specs?
Do you get stressed out thinking about shopping for a great Power Acoustik 2,500 Watt Monoblock Amp Specs? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Power Acoustik 2,500 Watt Monoblock Amp Specs, which is why we have assembled a comprehensive list of the greatest Power Acoustik 2,500 Watt Monoblock Amp Specs available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Power Acoustik 2,500 Watt Monoblock Amp Specs that you consider buying. Your questions might include the following:
- Is it worth buying a Power Acoustik 2,500 Watt Monoblock Amp Specs?
- What benefits are there with buying a Power Acoustik 2,500 Watt Monoblock Amp Specs?
- What factors deserve consideration when shopping for an effective Power Acoustik 2,500 Watt Monoblock Amp Specs?
- Why is it crucial to invest in any Power Acoustik 2,500 Watt Monoblock Amp Specs, much less the best one?
- Which Power Acoustik 2,500 Watt Monoblock Amp Specs is good in the current market?
- Where can you find information like this about Power Acoustik 2,500 Watt Monoblock Amp Specs?
We’re convinced that you likely have far more questions than just these regarding Power Acoustik 2,500 Watt Monoblock Amp Specs, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Power Acoustik 2,500 Watt Monoblock Amp Specs, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Power Acoustik 2,500 Watt Monoblock Amp Specs. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides a Power Acoustik 2,500 Watt Monoblock Amp Specs buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-17 list of the best available Power Acoustik 2,500 Watt Monoblock Amp Specs currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Power Acoustik 2,500 Watt Monoblock Amp Specs has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for a Power Acoustik 2,500 Watt Monoblock Amp Specs?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Power Acoustik 2,500 Watt Monoblock Amp Specs.
- Customer Ratings: Number rating grade Power Acoustik 2,500 Watt Monoblock Amp Specs objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Power Acoustik 2,500 Watt Monoblock Amp Specs.
- Product Quality: You don’t always get what you pay for with a Power Acoustik 2,500 Watt Monoblock Amp Specs, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable a Power Acoustik 2,500 Watt Monoblock Amp Specs is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Power Acoustik 2,500 Watt Monoblock Amp Specs information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Power Acoustik 2,500 Watt Monoblock Amp Specs is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.