The Best 10S Bms of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 10S Bms of 2022. Check our ranking below.
2,664 Reviews Scanned
- 【APPLICATION RANGE】: The protection board is for 13 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
- 【CHARGING DISCHARGING SEPARATED】: Charging connector and discharging connector are separated, continuous discharging current is 30A.
- 【BALANCE FUNCTION】: It has balance function which would ensure each battery cell being fully charged at same time.
- 【VITAL DATA】:Charging 4.25A, discharging 2.6A, over-current 30A, suitable for electric bicycles with 1000W motor. Size: 64x35x9mm.
- 【HIGH PERFORMANCE】: Stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.
- Li-ion cell 18650 battery protection board.Suitable for 10 series cell Li-ion batteries, can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- Has balance function which would ensure each battery cell being fully charged at same time.
- Overcharge protection, over-discharge protection and short circuit protection.
- With temperature control protection function.
- Suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- 【Scope of application】The 35A 36V 10S BMS PCB Protection Board is suitable for 10-cell lithium-ion batteries, such as ternary batteries, manganic batteries and cobalt acid batteriesbms 36v 10s
- 【Excellent performance】The charging and discharging interfaces are the same. With balanced heat sink and 10 low internal resistance high power MOS. The continuous discharge current is 35A. Instantaneous discharge current is 100A. It has a balancing function that ensures that each battery unit is fully charged at the same time
- 【Unique design】wiring is neat, avoiding right-angled lines and curveing the edges; reduce signal vias to avoid signal distortion and cross interference; the wiring identifications clear and easy to understand avoid misconnection
- 【Necessity】The material characteristics of the lithium battery make it impossible to overcharge, over discharge, overcurrent, etc. during use, so choosing the right protection board and applying it properly is critical to the battery life.This protection board provides stable various charging and discharging protection functions such as overcharge protection, overdischarge protection, overcurrent protection and short circuit protection
- 【Note】Before installing the protection board, the batteries must be matched well. The better the battery consistency is, the farther the running distance is, the best performance of the protection board is; the battery should be connected in parallel and then in series.Make sure the welding is correct (18650 battery with nickel spot welding, other batteries with solder welding), do not use screws to avoid burning the IC of the protection board
- 【Over-charge over-discharge protection】---18650 Li-ion battery pack will stop charge when a single cell voltage reaches 4.25V and stop discharge when its voltage reaches 2.7V.
- 【Temperature protection】---low temperature -20℃ battery protection and high temperature 70℃ discharging battery protection.
- 【Short Circuit Protection: 】When There is Defection or Damage to the Circuit, the BMS Will Shut Off The Whole Circuit
- 【Quality Guarantee】--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED.Shipping time within 9-14 days from China Dalyelec Manufacturing base normally. Delivery will be postponed as per National Holidays Regulation. Tracking information available.
- 【What You Will Get:】 Rated 3.7V Li-ion bms (WITHOUT SMART COMMUNICATION FUNCTION)+Matching Balance Wire+Temperature Sensor+ Instruction Manual
- High-accuracy voltage detection circuit, fine workmanship and durable.
- With Over-discharge protection, overcurrent protection, overcharge protection, temperature control protection function, safe and reliable.
- The protection board is for 10 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- It has balance function which would ensure each battery cell being fully charged at same time.
- It is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- Designed for 10 cell Li-ion batteries, can also be used for ternary batteries, manganese acid batteries and cobalt acid batteries
- Multiple protective functions including overcharge protection, overdischarge protection and short circuit protection
- Balance function ensures each battery cell being fully charged at the same time
- 35A discharging current, separated charging connector and discharging connector, easy to use
- Help prolong the service life of your battery pack
- Discharging current: 60A, Charging current: 30A, Passive Balance current: 30mA.
- Charge, Discharge Protection Current, Voltage range are permanently programmed inside BMS and cannot be changed. This is a 10S fixed configuration BMS. It cannot be used for any other battery pack configuration. This BMS also cannot be used for LiFePo4, Li-Metal or LTO batteries. It is strictly for Li-Ion battery packs only.
- Box contains: Rated voltage 36V BMS, balance sense cable (11 Wire sense cable with connector) and instruction sheet.
- Battery pack will stop charging when voltage reaches 4.25V and stop discharging when voltage reaches 3.0V of a cell.
- Temperature range of this BMS is from -20℃ to as high up to 70℃
- 【Product Description】: The 10S 36V Li-ion battery protection board is for 10 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries
- 【Your Choice】: Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries
- 【Balance Function】: This 40A BMS PCB battery protection board with wire has balance function which would ensure each battery cell being fully charged at same time
- 【Multiple Protections】: Our Li-ion Battery protection board with balance has stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection
- 【Note】: Charging connector and discharging connector are separated, discharging current is 18A
- Discharging current: 15A, Charging current: 7.5A, Passive Balance current: 30mA.
- Charge, Discharge Protection Current, Voltage range are permanently programmed inside BMS and cannot be changed. This is a 10S fixed configuration BMS. It cannot be used for any other battery pack configuration. This BMS also cannot be used for LiFePo4, Li-Metal or LTO batteries. It is strictly for Li-Ion battery packs only.
- Box contains: Rated voltage 36V BMS, balance sense cable (11 Wire sense cable with connector) and instruction sheet.
- Battery pack will stop charging when voltage reaches 4.25V and stop discharging when voltage reaches 3.0V of a cell.
- Temperature range of this BMS is from -20℃ to as high up to 70℃
- 【Usage】: The protection board is for 10 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
- 【Protective Functions】: Stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.
- 【Balance Functions】: It has balance function which would ensure each battery cell being fully charged at same time.
- 【Feature 】: Charging connector and discharging connector are separated, discharging current is 35A. Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries.
- 【Size】: 69×51.5×10mm/2.71×2.02×0.39"
Last update on 2022-10-15 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 10S Bms?
Do you get stressed out thinking about shopping for a great 10S Bms? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 10S Bms, which is why we have assembled a comprehensive list of the greatest 10S Bms available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 10S Bms that you consider buying. Your questions might include the following:
- Is it worth buying an 10S Bms?
- What benefits are there with buying an 10S Bms?
- What factors deserve consideration when shopping for an effective 10S Bms?
- Why is it crucial to invest in any 10S Bms, much less the best one?
- Which 10S Bms are good in the current market?
- Where can you find information like this about 10S Bms?
We’re convinced that you likely have far more questions than just these regarding 10S Bms, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 10S Bms, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 10S Bms. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 10S Bms buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 10S Bms currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 10S Bms has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 10S Bms?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 10S Bms.
- Customer Ratings: Number ratings grade 10S Bms objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 10S Bms.
- Product Quality: You don’t always get what you pay for with an 10S Bms, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 10S Bms is should be an indication of how long it will work out for you.
We always remember that maintaining 10S Bms information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 10S Bms is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is a 36V 10s BMS?
A: 36V 10s Battery Management System (BMS) 36V 10s BMS for lithium-ion cells. Description. A Battery Management System, or BMS for short, is used to protect your battery during charging and discharging. During charging, the BMS will monitor the voltage of all of your cells and balance the cell groups to ensure they are charged equally.
Q: What is a 10s battery used for?
A: 10S LI-ION BATTERIES. The bms 10s protection board is for 10 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries 35A DISCHARGE CURRENT.
Q: How does the BMS work?
A: During charging, the BMS will monitor the voltage of all of your cells and balance the cell groups to ensure they are charged equally. During discharging, the BMS will monitor the voltage of all of the cells, as well as the entire pack voltage and the discharge current.
Q: Why do BMSS cut power to the battery?
A: If the BMS determines that any of its preset limits have been passed, such as the battery draining too low or an unsafe amount of current being pulled from the battery, the BMS will cut power to the battery to protect it from damage. Most BMSs are hard to install because you have to solder on the wires yourself.