Skip to content

The Best 2.2 Kw Water Cooled Spindle of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 2.2 Kw Water Cooled Spindle of 2022. Check our ranking below.

2,620 Reviews Scanned

Rank No. #1
RATTMMOTOR 2.2KW Water Cooled Spindle 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter Variable Frequency Drive+80mm Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
RATTMMOTOR 2.2KW Water Cooled Spindle 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter Variable Frequency Drive+80mm Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
  • 【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
  • 【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
View Product
SaleRank No. #2
RATTMMOTOR CNC Spindle Motor 2.2KW Water Cooled Spindle Motor 220V ER20 Collet 80mm Diameter 8A 400HZ 24000RPM for CNC Router Engraving Milling Machine
RATTMMOTOR CNC Spindle Motor 2.2KW Water Cooled Spindle Motor 220V ER20 Collet 80mm Diameter 8A 400HZ 24000RPM for CNC Router Engraving Milling Machine
  • Bearing: 4PCS C7005x2 + C7002x2, 3pcs high quality bearings.
  • Frequency: 400Hz; Runout off: Less than 0.02mm.The Spindle motor Mainly suitable for non-metallic engraving.
  • This spindle only supports clockwise rotation, not reverse rotation. Notice: The spindle speed can't lower than 9000rpm !!!!
  • ISO9001 quality certifications which means this item is the top quality item.
  • In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.
View Product
Rank No. #3
VFD CNC Spindle Motor Kits：220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Φ80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)
VFD CNC Spindle Motor Kits：220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Φ80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)
  • 【Connection way】The package only supports 220VAC(+/-5%) 1/3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product
  • 【Package Include】1 x 220V-2.2KW VFD, 1 x2.2KW Φ80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
  • 【Warranty】1 Year discount replace (The spindle is half a year). If there is an error code in the product and you do not know how to operate, please contact the seller
View Product
Rank No. #4
Mophorn CNC Spindle Motor CNC Spindle Kits Water Cooled Spindle Motor For CNC Router Engraving Milling Machine (2.2KW)
Mophorn CNC Spindle Motor CNC Spindle Kits Water Cooled Spindle Motor For CNC Router Engraving Milling Machine (2.2KW)
  • Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm); Power: 2.2 KW; Voltage: 220V~250V; Current: 8A; Collet Size: ER20; Bearings: 3 bearings; Frequency: 400 Hz; Speed: 8000-24000 R/min; Runout off: less than 0.005 mm. The CNC spindle motor is mainly used for engraving machine or used with frequency converter.
  • ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
  • Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
  • Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
  • Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version of the aviation plug can ensure the stability and security of the input power, and the dust cover prevents dust from entering the body.
View Product
SaleRank No. #5
RATTMMOTOR CNC Spindle Motor Kit 220V 2.2KW Water Cooled Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 220V Single to 3 Phase Inverter+80W Water Pump+ER20 Collet+80mm Mount Clamp for CNC Router Machine
RATTMMOTOR CNC Spindle Motor Kit 220V 2.2KW Water Cooled Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 220V Single to 3 Phase Inverter+80W Water Pump+ER20 Collet+80mm Mount Clamp for CNC Router Machine
  • 【Package Include】: ①1 x 2.2KW Water Cooled Spindle Motor ②1 x 2.2KW VFD ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥1 x ER20 Wrench ⑦14 x ER20 Collet（1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm）
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.02mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
  • 【2.2KW VFD】①Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase, Current: 11A. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
  • ②Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
View Product
Rank No. #6
CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Cooled Spindle Motor + 2.2KW Single to 3 Phase VDF+110v Water Pump + 3.15 Inch Clamp + 196 Inch Water Pipe + 40 Inch Electric Wire+ 13pcs ER20 Collet
CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Cooled Spindle Motor + 2.2KW Single to 3 Phase VDF+110v Water Pump + 3.15 Inch Clamp + 196 Inch Water Pipe + 40 Inch Electric Wire+ 13pcs ER20 Collet
  • ✅【Spindle Technical Parameters】Spec: Φ2.39 x 11.37 in (Diameter: 7.2 cm x Length: 28.9 cm) Power: 2.2 KW; Voltage: 110V; Current: 8.5A; Collet Size: ER20; Bearings: 4 bearings,（2x7005C P4 DT, 2x7003C P4 DT, increase spindle life）Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.0015 mm; Weight: 11.46 ib. Mainly used for engraving machine or used with frequency converter.
  • ✅ 【VFD Inverter】 Power: 2.2 KW; Input Voltage: 110 V; Output Voltage: 110 V; Input Phase: 1 phase or 3 phase; Output Phase: 3 phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect; DC cooling fan low noise, large air volume. Perfect match with the water cooled spindle motor!
  • ✅【Energy-efficient Water Pump】Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performance, save time and effert pump and is well-designed for use in spindle, structure is compact and four powerful rubber suction cups can absorb shock and prevent fall off. The faucet is made of brass: great quality, durable and does not rust.
  • ✅【 Package include】① 1 x 110V 2.2KW Spindle Motor ②1 x 110V 2.2KW VDF Inverter ③1 x 110V 75W Water Pump ④1 x 196 in Water Pipes ⑤1 x 3.15 in Spindle Clamp ⑥2 x Wrench ⑦ 1 x 40 in wire ⑧ 10 x Drill Bits ⑨13 x ER20 Collet Set Gripping Range
  • ✅【 Support】 Covered by 1-year manufacturer warr anty. If you get stuck, contact us with any questions that arise, your satisfaction is important and we'll work to resolve your issues.
View Product
Rank No. #7
CNC Spindle CNC Motor 220V 2.2KW 2200W Quiet Water Cooled Spindle Motor 80mm 4 Bearings 24000RPM 400HZ for CNC Router Machine
CNC Spindle CNC Motor 220V 2.2KW 2200W Quiet Water Cooled Spindle Motor 80mm 4 Bearings 24000RPM 400HZ for CNC Router Machine
  • 【BASIC INFORMATION】-This spindle motor should be equipped with VFD 220V,400HZ. 2 Poles, Collet ER20(compatible with bits between 1/25" and 1/2" ) Diameter： Φ80mm，Voltage: 220V ,Power: 2.2 KW, Frequency: 400 Hz, Current: 8.5A , Speed: 5000-24000 RPM, Runout off: less than 0.005 mm. Weight:5.2kg( 11.5lbs).
  • 【SPINDLE ADVANTAGE 】-Less noise, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD.
  • 【WIDE APPLICATION】-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
View Product
Rank No. #8
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 for Engraving Machine
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 for Engraving Machine
  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
View Product
Rank No. #9
Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine
Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine
  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
View Product
Rank No. #10
CNCTOPBAOS 2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Milling Machine
CNCTOPBAOS 2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Milling Machine
  • ♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm; Frequency:400Hz; Voltage:110V; Accuracy: 0.003--0.005; Collet size: ER20; Bearings: 4 bearings; Net Weight: 5.2kg;Lubrication:Grease;Current:8.5A;Size:80x200mm
  • ♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%) ; Output Voltage 100V-120VAC ; Input Frequency: 48-63Hz ; Output Frequency: 0-400Hz ; Input Phase: Single phase ; Output Phase: Three phase; Output Current: 20A
  • ♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum
  • ♞【80W Water Pump+6M Pipe】Pump length:3.2m; Voltage:105-120VAC with US plug; Flow:3000L/H; Size:150x80x140mm
  • ♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
View Product

Last update on 2023-11-16 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 2.2 Kw Water Cooled Spindle?

Do you get stressed out thinking about shopping for a great 2.2 Kw Water Cooled Spindle? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 2.2 Kw Water Cooled Spindle, which is why we have assembled a comprehensive list of the greatest 2.2 Kw Water Cooled Spindle available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 2.2 Kw Water Cooled Spindle that you consider buying. Your questions might include the following:

  • Is it worth buying an 2.2 Kw Water Cooled Spindle?
  • What benefits are there with buying an 2.2 Kw Water Cooled Spindle?
  • What factors deserve consideration when shopping for an effective 2.2 Kw Water Cooled Spindle?
  • Why is it crucial to invest in any 2.2 Kw Water Cooled Spindle, much less the best one?
  • Which 2.2 Kw Water Cooled Spindle are good in the current market?
  • Where can you find information like this about 2.2 Kw Water Cooled Spindle?

We’re convinced that you likely have far more questions than just these regarding 2.2 Kw Water Cooled Spindle, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 2.2 Kw Water Cooled Spindle, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 2.2 Kw Water Cooled Spindle. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 2.2 Kw Water Cooled Spindle buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 2.2 Kw Water Cooled Spindle currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 2.2 Kw Water Cooled Spindle has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 2.2 Kw Water Cooled Spindle?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 2.2 Kw Water Cooled Spindle.
  5. Customer Ratings: Number ratings grade 2.2 Kw Water Cooled Spindle objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 2.2 Kw Water Cooled Spindle.
  7. Product Quality: You don’t always get what you pay for with an 2.2 Kw Water Cooled Spindle, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 2.2 Kw Water Cooled Spindle is should be an indication of how long it will work out for you.

We always remember that maintaining 2.2 Kw Water Cooled Spindle information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 2.2 Kw Water Cooled Spindle is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: