The Best 3.7V To 5V Boost Converter of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 3.7V To 5V Boost Converter of 2022. Check our ranking below.

2,203 Reviews Scanned

Rank No. #1

Comidox 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Power Module Voltage Boost Converter Board 0.9-5V to 5V 5PCS

DC-DC boost converter module, operating frequency 150KHZ, typical conversion efficiency of 85%.
Pin 2.54MM pitch.
Input voltage: 0.9-5V, output voltage: 5V, maximum output current: 480 mA.
Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch)
Weight: about 1g

Rank No. #2

ANMBEST 10PCS Mini Boost Module 3.7V to 5V 8V 9V 12V Step Up Board with LED Indicator for Electronic DIY

IInput Voltage: 2.5V~VOUT-0.5V; Output Voltage: can be set to 5V/8V/9V/12V.nput Voltage: 2.5V~VOUT-0.5V; Output Voltage: can be set to 5V/8V/9V/12V.
You can easily convert a single-cell lithium battery to 5V 8V 9V 12V.
The maximum output current reaches 1A.
Low power consumption.
The LED indicator can be turned off by the pad next to it.

Rank No. #3

Teyleten Robot Multi-Function Mini Boost Module 3.7V to 5V/8V/9V/12V Step Up Board 1.5A LED Indicator DIY Voltage Module 10pcs

Small size,product size: 22 × 11 × 3.6mm
Support 5V/8V/9V/12V, the default is 12V
The front side of the PCB can be seen with the words A and B. The output voltage can be changed by using the soldering iron to change the pad on and off.

Rank No. #4

AITRIP 6PCS 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable DC-DC Step Up Boost Module TP4056 DIY Kit Parts

Can be used for multimeter, converted to lithium battery charging
Discharging current: Max. 2A
Input voltage: 4.5-8V DC
Output voltage: 4.3-27V DC (Continuously adjustable)
Charging voltage: 4.2V DC ；Charging current: Max. 1A

Rank No. #5

Weewooday Dc-Dc Step up Power Module Output Voltage 5v Boost Converter 1.5v to 5v Regulator Voltage Boost Converter Board(10 Pieces)

Widely support: mini DC-DC voltage converter can support 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V
Frequency and conversion efficiency: DC-DC step up power module's operating frequency is 150KHZ with typical conversion efficiency of 85%
Basic detail: input voltage: 0.9-5V; Output voltage: 5V; Maximum output current: 480 mA; Please know the basic information about the product before you ordering it
Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch); Pin: 2.54MM pitch; Weight: about 1g
Attention: the input voltage must not be greater than nominal voltage, otherwise it will burn out the template; The input power must be greater than the output power, or the output voltage will be less than the nominal voltage

Rank No. #6

DAOKI 10PCS DC-DC Boost Converter Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Step-Up Voltage Power Supply Module with 40Pin Header

Input voltage:0.9~ 5V; output voltage:5V; Maximum output current: 480 MA; Working frequency:150KHZ, Efficiency <85%
INPUT:1-1.5V, OUTPUT:5V 40-100MA; INPUT:1.5-2V, OUTPUT:5V 100-150MA; INPUT:2-3V, OUTPUT:5V 150-380MA; INPUT above 3V, OUTPUT:5V 380-480MA;
Note:Input voltage can not be greater than the maximum input range; Output power can not be greater than the maximum load for a long time; Input power must be greater than the output power, because the power consumption of the module itself
Widely use for Wireless Module, Development Board, Camera, Video camera, VCR, MP3/MP4 player, Audio equipment, Wireless communication equipment
Package Content:10 x DC-DC Boost Converter Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V, 1 x 40Pin Header

Rank No. #7

6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module

★ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
★ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
★ In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
★ The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
★ Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)

Rank No. #8

8PCS 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Supply Charge and Discharge Protection Converter Protection PCB Board Module

❃❃ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground).
❃❃ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
❃❃ The output opens automatically at the first time the load is connected.If the load is less than 50MA, automatically close the output after 30 seconds;If the load is greater than 50MA, the output opens automatically.
❃❃ High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
❃❃ Can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.

Rank No. #9

KOOBOOK 2Pcs Mini DC-DC Boost Step-up Power Supply Module 3.3V 3.7V 5V 6V 7.2V 9V to 12V Voltage Regulator Converter

Input voltage 3-6V, output 12V
Maximum input current:1.2A;Long-term work Current : IA;1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 °. The power MOSFET wake up when the junction emperature drops 30 ° under the OTP threshold temperature.
Conversion efficiency:80-90%;DC-DC Boost module working frequency 1.0MHZ.
2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA / CPLD Development Board friendly.

Rank No. #10

15Pcs 0.9-5V to 5V DC-DC Step Up Power Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Voltage Boost Converter Board

3.3V Output: Input voltage 0.9-3.3V; output voltage 3.3V; Maximum output current: 500 mA;
3.3V Output: Starting voltage 0.8V, output current 10MA; Input 1-1.5V, output 3.3V 50-110MA; Input 1.5-2V, output 3.3V 110-160MA; Input 2-3V, output 3.3V 160-400MA.
5V Output: Input voltage 0.9-5V; Output voltage 5V; Maximum output current: 480 mA;
5V Output: Starting voltage 0.8V, output current 7MA; Input 1-1.5V, output 5V 40-100MA; Input 1.5-2V, output 5V 100-150MA; Input 2-3V, output 5V 150-380MA; Input more than 3V, output 5V 380-480MA.
This is a voltage boost converter module, when using it, be sure to observe the following conditions: The input voltage cannot be greater than the nominal voltage, otherwise the module will burn out; The input power must be greater than the output power, otherwise the output voltage will be less than the nominal voltage; The output load cannot be greater than the nominal load, otherwise the output voltage will be less than the nominal voltage.

Last update on 2023-05-21 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 3.7V To 5V Boost Converter?

Do you get stressed out thinking about shopping for a great 3.7V To 5V Boost Converter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3.7V To 5V Boost Converter, which is why we have assembled a comprehensive list of the greatest 3.7V To 5V Boost Converter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3.7V To 5V Boost Converter that you consider buying. Your questions might include the following:

Is it worth buying an 3.7V To 5V Boost Converter?
What benefits are there with buying an 3.7V To 5V Boost Converter?
What factors deserve consideration when shopping for an effective 3.7V To 5V Boost Converter?
Why is it crucial to invest in any 3.7V To 5V Boost Converter, much less the best one?
Which 3.7V To 5V Boost Converter are good in the current market?
Where can you find information like this about 3.7V To 5V Boost Converter?

We’re convinced that you likely have far more questions than just these regarding 3.7V To 5V Boost Converter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3.7V To 5V Boost Converter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3.7V To 5V Boost Converter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 3.7V To 5V Boost Converter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3.7V To 5V Boost Converter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 3.7V To 5V Boost Converter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 3.7V To 5V Boost Converter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 3.7V To 5V Boost Converter.
Customer Ratings: Number ratings grade 3.7V To 5V Boost Converter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3.7V To 5V Boost Converter.
Product Quality: You don’t always get what you pay for with an 3.7V To 5V Boost Converter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 3.7V To 5V Boost Converter is should be an indication of how long it will work out for you.

We always remember that maintaining 3.7V To 5V Boost Converter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3.7V To 5V Boost Converter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How to design PCB for boost converter using me2108 IC?

A: This IC can deliver 400mA output current if the input voltage 3.0V and output voltage fixed at 5.0V. When you design the PCB for boost converter using ME2108 set external components as close as possible to the IC and minimize the connection between components and IC.

Q: What is mc34063a buck-boost converter?

A: The MC34063A Buck-Boost Converter IC is a monolithic control circuit containing the primary functions required for DC−to−DC converters. The IC consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver, and high current output switch.

Q: How to fix 5V output on a circuit?

A: For the fix 5V output, a load always needs to be connected as between 220ohm to 470ohm. Thus a single circuit can be used as 3.7 to 5V Voltage Booster Circuit or 5.3V or 6V Booster.

Q: What is the output voltage of 6V circuit?

A: The output of the circuit is designed to give fix 6V. The diode 1N4007 reduces the 6V output voltage to around 5.3V. The Schottky diode further reduces 5.3V to around 5.0V. The total maximal output current from all outputs terminal is around 100mA. The current can be adjusted with the help resistor R1 in the circuit.