Skip to content

The Best 3 Axis Cnc Kit of 2025 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 3 Axis Cnc Kit of 2025. Check our ranking below.

2,741 Reviews Scanned

Rank No. #1
RATTMMOTOR 3 Axis Nema23 Stepper Motor Kit,425oz-in 3A 112mm,DM556S Motor Driver,4 Axis USB Mach3 Controller Board Motion Control Card 36V CNC Kit for CNC Router Milling Machine
RATTMMOTOR 3 Axis Nema23 Stepper Motor Kit,425oz-in 3A 112mm,DM556S Motor Driver,4 Axis USB Mach3 Controller Board Motion Control Card 36V CNC Kit for CNC Router Milling Machine
  • 23HS2430B Nema23 Stepper Motor: Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires; Wirings: A+ to Red / A- to Green / B+ to Yellow / B- to Blue Motor Size: 57x57x112mm
  • DM556S Stepper Motor Driver: Current: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC
  • Feature of Driver:Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise
  • 4 Axis USB Mach3 Control Board: USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed; As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10
  • 400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC; 75W 24V DC Switching power supply Input voltage: 100-240V AC; Output voltage: 24V; This 24V power supply is used to power the 4 axis usb mach3 control card
Amazon Prime
View Product
Rank No. #2
CNC Controller Kit 3 Axis with Nema 23 Closed Loop Stepper Motor 3 Nm 428 oz.in 1000 Line Encoder Stepper Motor, 24-80V DC Steping Driver, 350W Power Supply Mach3 Control Card for Engraving
CNC Controller Kit 3 Axis with Nema 23 Closed Loop Stepper Motor 3 Nm 428 oz.in 1000 Line Encoder Stepper Motor, 24-80V DC Steping Driver, 350W Power Supply Mach3 Control Card for Engraving
  • Items in Kit: 3 Pcs 3Nm Closed loop stepper motor with 1000line encoder. 3 Pcs Nema 23 Closed loop stepper motor driver. 1 x 350W Power Supply and 1 x Mach3 Card.
  • Closed Loop Stepper Motor: Holding Torque: 3N.m/300Ncm, Current: 3A, Phase: 2, Motor Length: 2.24*2.24*4.41 inch (57x57x112 mm), Step Angle: 1.8 degree, Motor Lead Wire: 4-wire, Encoder: 1000 lines, Inductance: 3.5 mH, Resistance: 0.8 (ohm). Stepper motor closed loop system,never lose step.
  • Parameter of Closed Loop Stepper Motor Driver: Type: DSP Closed loop stepper drive; Maximum peak current: 13A; Impulse response frequency: 200KHz; Input Voltage: 24-80VDC; Micro-stepping driver: 800~25600ppr; Compatible : 4.5~28V signal; Signal input: Support PUL/DIR and CW/CCW modes (difference). This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.
  • Stable output 24V DC 350W power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
  • Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. It supports over-current protection, over-voltage protection, position outside the tolerance protection.
Amazon Prime
View Product
Rank No. #3
RATTMMOTOR CNC Controller Kit, 3 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
RATTMMOTOR CNC Controller Kit, 3 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
  • 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
  • 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "Pul+" connects to control card's XP+ pin , Driver's "DIR+" connects to control card's XD+ pin , Driver's " PUL- " pin and " DIR- " connection to USB Mach3 control card's " GND ".
  • 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
  • 【Support Forward and Reverse Control Stepper Motor Driver】42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
  • 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
Amazon Prime
View Product
Rank No. #4
TOSEASTARS CNC Controller Kit 3 Axis with Nema 34 86mm Stepper Motor 12Nm 1700 oz-in 2PH 6.0A 14mm Key-Way Shaft 150mm Body, Step Motor Driver, 400W Power Supply 60V, USB Mach3 CNC Control Card
TOSEASTARS CNC Controller Kit 3 Axis with Nema 34 86mm Stepper Motor 12Nm 1700 oz-in 2PH 6.0A 14mm Key-Way Shaft 150mm Body, Step Motor Driver, 400W Power Supply 60V, USB Mach3 CNC Control Card
  • Professional CNC Controller Kit: This is a professional 3d printer DIY kit made of high premium materials. It's a DIY kit with tons of possibilities with multiple types of modules or components you need. The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
  • 3 Pcs Nema 34 86mm Stepper Motor: 12Nm/1200Ncm 1714.28 oz.in holding torque, nema 23 step motor size 86x86x150mm/3.38 x3.38 x5.9 inch. Current: 6A; 1.8 deg. step angle(200 steps/rev); 2 phase 4-lead wires; shaft diameter: 14mm key-way shaft; phase inductance 5.2±20%(mH) & resistance 0.5±10% ohms(Ω).
  • 3 Pcs Nema 34 Stepper Motor Driver HB860C: HB860C driver Voltage: DC 24V-110V, AC 18-80V. Subdivision: 400-51200 steps/turn.
  • Stable output 60V DC power supply: Rated Load: 400W (Max Load). Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage. Output voltage:DC60V (constant voltage). Shell hollow design, heat dissipation ability faster and stronger, more durable performance.
  • Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability.
Amazon Prime
View Product
Rank No. #5
3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in 2-Phase 6A, Step Motor Driver, 400W 60V Power Supply, Mach3 Control Card for CNC Router Machine Engraving
3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in 2-Phase 6A, Step Motor Driver, 400W 60V Power Supply, Mach3 Control Card for CNC Router Machine Engraving
  • 3 Pcs Nema 34 86mm Stepper Motor: 4.5Nm (450Ncm 640oz.in) holding torque and low noise, nema34 step motor size 86x86x80mm (3.38x3.38x3.14 inch). Current: 6A; 1.8 deg. step angle(200 steps/rev); 2 phase 4-lead wires; 14mm key-way shaft, phase inductance 5.6±20%(mH) & resistance 0.75±10% ohms(Ω).
  • 3 Pcs HB860C Stepper Motor Driver: Driver Voltage: DC 24-110V, AC 18-80V, which is suitable for all two-phase hybrid nema34 stepping motors. There are 16 kinds of micro steps, and the output current has 8 gears. Subdivision: 400-51200 steps/turn.
  • 3 Pcs Stable output 400W 60V DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
  • Functions of the Mach3 Control Board: It supports 5-axis linkage control at most for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device. Strong anti-interference and high reliability. As long as Mach3 is running, the control card can be used without installing any drivers.
  • Professional CNC Controller Kit: This is a professional 3d printer DIY kit made of high premium materials. It's a DIY kit with tons of possibilities with multiple types of modules or components you need. Applications: Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Routers , 3D printers, medical equipment, industrial equipment, laser machine, automation devices,etc.
Amazon Prime
View Product
Rank No. #6
3 Axis CNC Controller Kit with Nema 23 57mm Stepper Motor Kits 2Nm 285 oz.in 2-Phase 3A, DM556 Stepper Motor Driver, 350W Power Supply Mach3 Control Card for Machine Engraving Machine
3 Axis CNC Controller Kit with Nema 23 57mm Stepper Motor Kits 2Nm 285 oz.in 2-Phase 3A, DM556 Stepper Motor Driver, 350W Power Supply Mach3 Control Card for Machine Engraving Machine
  • Professional CNC Controller Kit: 3 Axis stepper motor kit is a DIY kit with tons of possibilities with multiple types of modules or components you need 3d printer DIY kit. Package list includes: 3pcs motor, 3pcs driver, 1pcs power supply, 1pcs control card.
  • 3 Pcs Nema 23 57mm Stepper Motor: 2Nm 200Ncm 285oz.in holding torque, nema 23 step motor size 57x57x80mm/2.24 x2.24 x3.15 inch. Current: 3A; 1.8 deg. step angle(200 steps/rev), 2 phase 4-lead wires; shaft diameter: 8mm ( D shaft Φ 7.5mm ), phase inductance 4.6±20%(mH) & resistance 1.2±10% ohms(Ω).
  • 3 Pcs DM556 step motor Driver: DM556 driver Voltage: DC 20V-50V, which is suitable for all two-phase hybrid stepping motors with current less than 5.6A. There are 15 kinds of micro steps, and the output current has 8 gears. The motor driven by dm556 has less noise and vibration than other drivers (like TB6600) on the market.
  • Stable output 24V DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 100V or 240V AC; selected by switch to choose input voltage.
  • Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability.
Amazon Prime
View Product
Rank No. #7
3 Axis CNC Controller Kit Nema34 86mm Closed Loop Stepper Motor Kit 8.5Nm DSP Easy Servo & Steping Driver & 400W 60V DC Power Supply, for 3D Printer Engraving Milling Machine
3 Axis CNC Controller Kit Nema34 86mm Closed Loop Stepper Motor Kit 8.5Nm DSP Easy Servo & Steping Driver & 400W 60V DC Power Supply, for 3D Printer Engraving Milling Machine
  • 3 PCS Nema 34 86mm Closed Loop Stepper Motor: Holding Torque: 8.5N.m (850ncm 1203.7 oz.in); Rated Current: 6A; Phase: 2-Phase; Motor Lead Wire: 4-Wires; Step Angle:1.8 degree; Encoder lines:1000; Shaft diameter: 14mm; Size: 86x86x118mm / 3.38*3.38*4.65 inch.
  • 3 PCS Motor Driver: Type: 2-Phase Hybrid Step Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500MΩ; Output Peak Current: 0~8A; Voltage: AC 18-80V or DC 18-110V input; Micro-stepping driver: 200~51200ppr.
  • 3 PCS 60V 400W Power Supply: Power:400W; Output Voltage(DC): 60VDC; Input Voltage (AC): 110V/220V(+-10%), Us choose 110V; Output Current: 6.6A; Safety Compliance:CCC/ FCC / CE.
  • Advantages: Stepper motor closed loop system,never lose step. The encoder technology can increase the accuracy of the motor; Improve motor output torque and working speed. It supports over-current protection, over-voltage protection, position outside the tolerance protection.
  • High Efficiency: Our nema 34 closed loop stepper motor can suitable for all kinds of small and medium-sized automationequipment and instruments, such as: engraving machines, cuttingmachines, laser machines, plotters, CNC machine tools, automaticassembly equipment, electronic processing equipment, textile andclothing equipment, etc.The application effect is better in the equipment with low noise.
Amazon Prime
View Product
Rank No. #8
3 Axis Nema 34 Stepper Motor Kit CNC Controller with Nema34 Stepper Motors 8.5Nm 1200oz.in 6A, Motor Driver, 60V Power Supply, USB Mach3 Control Card for CNC Engraving Machine Router
3 Axis Nema 34 Stepper Motor Kit CNC Controller with Nema34 Stepper Motors 8.5Nm 1200oz.in 6A, Motor Driver, 60V Power Supply, USB Mach3 Control Card for CNC Engraving Machine Router
  • Professional CNC Controller Kit: This is a professional 3d printer DIY kit made of high premium materials,which includes 3 pcs Nema23 stepper motors, 3 pcs drivers, 3pcs power supply, and 1pc USB Mach3 control board, capable of meeting your diverse needs. The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser cnc machine, automation devices.
  • 3 Pcs Nema34 86mm Stepper Motor: 8.5Nm/850Ncm 1200 oz.in holding torque, nema 23 step motor size 86x86x118mm/3.38 x 3.38 x 4.65 inch. Current: 6A; 1.8 deg. step angle(200 steps/rev); 2 phase 4-lead wires; shaft diameter: 14mm key-way shaft, phase inductance 2.1±20%(mH) & resistance 0.5±10% ohms(Ω).
  • 3 Pcs Nema 34 Stepper Motor Driver HB860C: HB860C driver Voltage: DC 24V-110V, AC 18-80V, which is suitable for all two-phase hybrid nema34 stepping motors. There are 16 kinds of micro steps, and the output current has 8 gears. Subdivision: 400-51200 steps/turn.
  • Stable output 60V DC power supply: Rated Load: 400W (Max Load). Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage. Output voltage:DC60V (constant voltage).
  • Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. As long as Mach3 is running, the control card can be used without installing any drivers.
Amazon Prime
View Product
Rank No. #9
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
Amazon Prime
View Product
Rank No. #10
3 Axis Nema23 Stepper Motor Kit with Closed Loop Nema 23 2 Nm/285oz.in Step Motor and Steping Motors Driver 350W 24V Power Supply USB Mach3 Control Card for CNC Controller
3 Axis Nema23 Stepper Motor Kit with Closed Loop Nema 23 2 Nm/285oz.in Step Motor and Steping Motors Driver 350W 24V Power Supply USB Mach3 Control Card for CNC Controller
  • Items in Kit: 3 Pcs 2Nm nema23 Closed loop stepper motor with 1000line encoder. 3 Pcs Nema 23 stepper motor driver. 1 Pc 24V 350W Power Supply and 1 Pc USB Mach3 Card. This is a complete stepper motor motion control system for professional 3d printer DIY kit.
  • Specifications of Nema23 Stepper Motor: Holding Torque: 2N.m; Current: 3A; 2 phase 4 wire; Step Angle: 1.8 degree; Encoder: 1000 lines; Inductance: 2 mH; Resistance: 0.7 (ohm); Motor Length: 57x57x80 mm / 2.24*2.24*3.15 inch.
  • Parameter of Nema23 Closed Loop Stepper Motor Driver: DSP Closed loop stepper drive; Impulse response frequency: 200KHz. Supply voltage (DC): 24-80Vdc, Compatible : 4.5~28V signal; continuous output current: 0.5-13A. Micro-stepping driver: 200~25600ppr; Signal input: Support PUL/DIR and CW/CCW modes (difference). This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.
  • Stable output 24V 350W DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
  • Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. Applications: Nema 23 closed loop stepper motor kit can be applied to all kinds small and medium-sized automation equipment and instrument,such as 3D printer, CNC machine, milling machine, carving machine, special industrial sewing machine, stripping machine, marking machine, graph plotter, cnc machine, automatic assembly equipment,automation application and so on.
Amazon Prime
View Product

Last update on 2026-01-30 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 3 Axis Cnc Kit?

Do you get stressed out thinking about shopping for a great 3 Axis Cnc Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3 Axis Cnc Kit, which is why we have assembled a comprehensive list of the greatest 3 Axis Cnc Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3 Axis Cnc Kit that you consider buying. Your questions might include the following:

  • Is it worth buying an 3 Axis Cnc Kit?
  • What benefits are there with buying an 3 Axis Cnc Kit?
  • What factors deserve consideration when shopping for an effective 3 Axis Cnc Kit?
  • Why is it crucial to invest in any 3 Axis Cnc Kit, much less the best one?
  • Which 3 Axis Cnc Kit are good in the current market?
  • Where can you find information like this about 3 Axis Cnc Kit?

We’re convinced that you likely have far more questions than just these regarding 3 Axis Cnc Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3 Axis Cnc Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3 Axis Cnc Kit. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 3 Axis Cnc Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3 Axis Cnc Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 3 Axis Cnc Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 3 Axis Cnc Kit?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 3 Axis Cnc Kit.
  5. Customer Ratings: Number ratings grade 3 Axis Cnc Kit objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3 Axis Cnc Kit.
  7. Product Quality: You don’t always get what you pay for with an 3 Axis Cnc Kit, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 3 Axis Cnc Kit is should be an indication of how long it will work out for you.

We always remember that maintaining 3 Axis Cnc Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3 Axis Cnc Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: