The Best 800W Spindle of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 800W Spindle of 2022. Check our ranking below.

2,812 Reviews Scanned

Rank No. #1

RATTMMOTOR 800W Spindle Motor Kit, 0.8KW 110V ER11 20000RPM 0.79NM Air Cooled DC Spindle Motor+Mach3 Fuction Motor Speed Controller Power Supply Converter AC110V/220V+52mm Mount Clamp for CNC Machine

【Supports Reverse Rotation】As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque：0.79NM; Diameter: 52mm.
【Speed Controller】 Power :800W; Input Voltage: AC100-AC220V±10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
【Advantages】This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
【Features】With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.

Rank No. #2

RATTMMOTOR 800W 110V CNC Air Cooled Spindle Motor 52mm 0.8KW Spindle Motor ER16 20000RPM 0.79NM with Carbon Brushes for CNC Router Engraver Milling Machine

As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque：0.79NM; Diameter: 52mm.
This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time.
The motor is equipped with ER16 extension rod and collet, which supports engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.

Rank No. #3

CNC Spindle Motor Kits, 110V 800W 0.8KW Air Cooled Spindle CNC Spindle +110V 0.75KW VFD+Φ65mm Clamp Mount +Collet Set ER11+ Drill bits+ Wires+ Wrenches for CNC Router Machine

【PACKAGE LIST】-1x110V 0.8KW air Cooled Spindle Motor +1x110V 0.75KW VFD+ 1x Φ65mm CNC Clamp Mount +13x ER11 Collets(1mm-7mm) +10x CNC Router Bits+ 1x aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+1xpower wire+2x wrenches
【EASY AND FAST TO ASSEMBLE 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
【WIDE APPLICATION】-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem.

Rank No. #4

HY HUANYANG Water Cooled CNC Spindle Milling Motor 110V 800W 24000RPM 400hz Φ65mm ER11 Collet

【4pcs Powerful Bearings】Adopts imported P4 bearings with large torque ,high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
【24000RPM High Speed】Because it is a high-speed motor, it is recommended to run at 8000-24000RPM, if it is a low speed rotation, it will produce a relatively strong current
【Basic function】It is mainly suitable for non-metallic engraving, such as wood carving/engraving machine, advertisement
【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.

Rank No. #5

800W Spindle Motor Kit, RATTMMOTOR 0.8KW 110V CNC Air Cooled Spindle Motor 52mm ER16 20000RPM+Mach3 Speed Controller Governor with Power Supply AC110V-220V+Spindle Mount Clamp for CNC Router Machine

【Supports Reverse Rotation】As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque：0.79NM; Diameter: 52mm.
【Speed Controller】 Power :800W; Input Voltage: AC100-AC220V±10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
【Advantages】This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
【Features】With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.

Rank No. #6

RATTMMOTOR 800W Water Cooled Spindle Kit, 65mm Spindle Motor 0.8KW 110V 400HZ+1.5KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive+65mm Spindle Mount+ER11 Collet+80W Water Pump for CNC

【Package Include】: ①1 x 0.8KW Water Cooled Spindle Motor ER11 ②1 x 1.5KW VFD 110V③1 x 65mm Spindle Motor Mount ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥14 x ER11 Collet（1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm）
【0.8KW Spindle Motor】: ①This is a 110V-0.8KW water-cooled 8A Φ 65x158mm spindle motor come with a ER11 nut and collet, and equipped with a 65mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter clockwise.
【VFD Inverter Parameters】The 1.5KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase.
【How to Connect Spindle Motor and VFD Inverter】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
【80W 110V Water Pump】Power: 80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50HZ. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.

Rank No. #7

RATTMMOTOR 800W 110V CNC Air Cooled Spindle Motor 52mm 0.8KW Spindle Motor ER11 20000RPM 0.79NM with Carbon Brushes for CNC Router Engraver Milling Machine

As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque：0.79NM; Diameter: 52mm.
This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time.
The motor is equipped with ER11 extension rod and collet, which supports engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.

Rank No. #8

RATTMMOTOR 800W Air Cooled Spindle Motor 110VAC 24000RPM 65mm 0.8KW CNC Spindle Motor ER11 400HZ for CNC Router Engraver Milling Machine

【Basic Parameters】- Diameter: 65 mm x Length: 188 mm, Power: 800W, Voltage: 110VAC, Frequency: 0-400Hz, Collet Size: ER11, Runout off: Less than 0.01mm, Precision Tapered Bore: Less than 0.005mm, Speed: 0-24000rpm (Please keep the speed of spindle rotation above 9000 rpm.)
【Cooling Method】- Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.
【Rotation Accuracy】- The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.
【Material & Configure】- The spindle has fine workmanship，stainless steel body and dustproof design make the spindle more durable.
【Main Application 】This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as wood, aluminum, glass, PVC industry ,ect.

Rank No. #9

RATTMMOTOR 0.8KW CNC Spindle Milling Motor, 800W Air Cooled Spindle Motor 220VAC 24000RP 65mm CNC Spindle CNC Motor ER11 400HZ for CNC Router Engraver Milling Machine

【Basic Parameters】- Diameter: 65 mm x Length: 188 mm, Power: 800W, Voltage: 220VAC, Current: 4A, Frequency: 0-400Hz, Collet Size: ER11, Runout off: Less than 0.01mm, Precision Tapered Bore: Less than 0.005mm, Speed: 0-24000rpm (Please keep the speed of spindle rotation above 9000 rpm.)
【Cooling Method】- Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.
【Rotation Accuracy】- The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.
【Material & Configure】- The spindle has fine workmanship，stainless steel body and dustproof design make the spindle more durable.
【Main Application 】This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as wood, aluminum, glass, PVC industry ,ect.

Rank No. #10

RATTMMOTOR CNC Router Motor 0.8KW 800W Water Cooled Spindle Motor 110V 4A ER11 400HZ 24000RMP for CNC Router Engraver Milling Machine

✅【Simple Introduction】This is a 110V 0.8KW water-cooled 4A Φ 65x158mm spindle motor come with a ER11 nut and collet. Frequency is 400HZ, 0.005mm precision tapered bore and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
✅【How to Wire The Spindle Motor】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 does not require wiring.
✅【Speed of The Spindle Motor】0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
✅【Advantages】 P4 high speed bearings, dynamic balance, high-precison nut and chuck, it can better ensure the accuracy of the spindle. It's not easy to oxidize and rust with the water-cooling design, and pure copper galvanized nozzle.
✅【About The Design dvantages of The Spindle Motor】The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.

Last update on 2025-11-22 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 800W Spindle?

Do you get stressed out thinking about shopping for a great 800W Spindle? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 800W Spindle, which is why we have assembled a comprehensive list of the greatest 800W Spindle available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 800W Spindle that you consider buying. Your questions might include the following:

Is it worth buying an 800W Spindle?
What benefits are there with buying an 800W Spindle?
What factors deserve consideration when shopping for an effective 800W Spindle?
Why is it crucial to invest in any 800W Spindle, much less the best one?
Which 800W Spindle are good in the current market?
Where can you find information like this about 800W Spindle?

We’re convinced that you likely have far more questions than just these regarding 800W Spindle, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 800W Spindle, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 800W Spindle. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 800W Spindle buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 800W Spindle currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 800W Spindle has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 800W Spindle?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 800W Spindle.
Customer Ratings: Number ratings grade 800W Spindle objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 800W Spindle.
Product Quality: You don’t always get what you pay for with an 800W Spindle, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 800W Spindle is should be an indication of how long it will work out for you.

We always remember that maintaining 800W Spindle information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 800W Spindle is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best 800W Spindle of 2022 – Reviewed and Top Rated

How Do You Buy The Best 800W Spindle?

Related Post: