The Best Active Poe Splitter of 2025 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Active Poe Splitter of 2025. Check our ranking below.

2,521 Reviews Scanned

Rank No. #1

Bawofu Active PoE Power Over Ethernet Splitter Adapter 48V to 12V, 5.5x2.1mm DC, IEEE 802.3AF/at Compliant 10/100Mbps PoE Splitter with 12V Output for Surveillance Camera CCTV & VoIP Phone, 2 Pack

Adaptive 10/100Mbps network data transmission: This poe splitter compatible with IEEE802.3-AF/AT transport protocol uses six types of all-copper cables for real-time data transmission without jamming
Input Power Voltage: Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance DC44-57V from poe switch or poe injector, deliver power up to about 100m (328 feet).The maximum power consumption is 15.4W, and the POE input voltage range is 48V-57V. 5.5x2.1mm DC Plug Cable. DC Jack(Male) output DC voltage is 12V and the maximum output DC current is 1.2A
Plug-and-Play - Require no configuration: A simple solution to expand your network to where you wish to place network devices but has no power outlet, powerline ethernet adapter
Easy to install and operate: Any device which connects to a network via an ethernet cable,needs only one cable connection to power and operate if you use PoE.POE makes installation simpler and less expensive, helps to scaling up networks and adding new connections and devices. POE splitter can make non-POE device works via POE.Say goodbye to the wiring annoyance of multiple lines by simply connecting one network cable to transmit data and power at the same time
Typical application areas include malls, hospitals, companies, parking lots, urban streets, residential buildings, etc. M2C mode sales, the powerful production capacity of background factories, while ensuring capacity and quality, directly give the buyer (consumers), so that the buyer can buy high performance-price ratio products, so that the buyer can buy with confidence

Rank No. #2

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC Plug Cable(PS5712TG)

【PoE 48V to DC 12V/2A】Convert 48V PoE to DC 5.5*2.1mm 12V/2A output. DC cable for power supply and RJ45 cable for netework. Non-PoE devices with DC 5.5*2.1mm ports can enjoy the same convenience of POE power as POE devices.
【Max 24W DC Output】Auto detecte, appropriate power output to connected devices. Up to Max 24W (12V/2A) via DC 5.5*2.1mm connector.
【Gigabit Speed up to 1000Mbps】Support fast gigabit transmission, compatible with 10/100/1000Mbps rates.
【Plug and Play 】Simply connect to terminal equipment and work, easy to use, avoid complex configuration.
【Multiple Protection】Isolation circuit protection, Short circuit protection, Overvoltage protection, effectively protect your equipment.

Rank No. #3

DSLRKIT Active PoE Splitter 48V to 5V 2.4A USB Type A Female 802.3af Power Over Ethernet

Active PoE Splitter Power Over Ethernet with USB TYPE A Female
Compliant with IEEE802.3af
With 2.5KV isolation
The product must be used in conjunction with a PoE switch or PoE injector
Output voltage of 5.2V, the maximum output current of 2.4A. Suitable for the Tablet PC or mobile and other DC5V device

Rank No. #4

Gigabit PoE Splitter USB C 5V 2.4A, Active PoE to USB C Adapter, 10/100/1000Mbps, IEEE 802.3af/at Compliant, High-Speed Data & Power Over Ethernet USB Type C for Raspberry Pi 4/Security Cameras/Tablet

【Convert PoE to USB-C】The gigabit PoE splitter USB C converts a single IEEE802.3af/at PoE Ethernet cable input into separate USB-C(5V/2.4A) and RJ45 data signal. Easy and convenient to deliver wired network and power to USB-C devices that lack built-in POE, reducing cable clutter and eliminating the need for a nearby wall outlet
【1000Mbps Gigabit Data and Power】The USB C PoE spitter provides a stable 5V DC power supply via USB-C while simultaneously offering 10/100/1000 Mbps Gigabit Ethernet connectivity, fast and no lagging, no data-loss network signal
【15W PoE to 5V/2.4A Output】The POE to USB C adapter typically converts 48V PoE to stable 5V 2.4A output. (It works with an IEEE 802.3af/at compliant PoE switch/44-57V or injector to function, DO NOT use with 24V Passive PoE)
【Easy Installation】Plug-and-play: Simply connect the active POE splitter USB C to terminal device and work, easy to use, no complex configuration needed
【Supported Devices】Ideal for Raspberry Pi 4, USB-C security cameras, VoIP phones, tablets, and smart home devices (e.g., Echo Dot) or other USB Type-PC devices

Rank No. #5

UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets, Dropcam or Raspberry Pi 2/3B+ (48V to 5V 2.4A)

12 watt micro USB Power over Ethernet PoE up to Remote 328-492ft (100-150m) via Ethernet cable, 802.3af PoE switch or 48v injector is needed
Power Output Port: 5V 2.4A Micro USB Power Plug
Compatible with 44-57V DC voltage, overvoltage protection
Support IEEE 820.3af PoE Switch, 48V Unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, 48v injector. For gigabit PoE switches users, gigabit splitter U515902 is recommended
Suitable for Android Tablets, Dropcam, Raspberry Pi – Micro USB. 2-Pack: B07QPRVM51

Rank No. #6

UCTRONICS PoE Splitter USB-C 5V - Active PoE to USB-C Adapter, IEEE 802.3af Compliant for Raspberry Pi 4, Google WiFi, Security Cameras, and More

What is it - A UCTRONICS PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.
What is PoE – Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source
Why PoE to USB-C – A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable
What else needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter.
Note – 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 2.4A with its 802.3af compliance. Check B07V35DH5F for power-hungry applications. 3. Just put the split Ethernet aside if you don’t need the data. 4. The Split Ethernet cable does not carry power anymore.

Rank No. #7

DSLRKIT DC 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af 5.5x2.1mm

5.5x2.1mm DC Plug Active PoE Splitter，48V to 5V 2.4A (Max. 12watt)
10/100Mbps Ethernet，Compliant with IEEE802.3af，With 2.5KV isolation
This POE Splitter is suitable for household IP camera with DC 5V power (as the kind in the photo of the instruction),it does not suit equipments with DC 12V power
Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter to Manual 100Mb/s mode in the management Settings of switches, otherwise the power supply may work normally but the network connection will not work, such as the following switch, HP 3500-48G-PoE yl Switch (J8693A)
Please note that Philips changed the size of the DC socket on the Bridge. If you have a v1 Bridge the DC socket is 5.5×2.1mm. If you have a v2 Bridge the DC socket is 5.5×2.5mm, this splitter is not compatible.

Rank No. #8

UCTRONICS for Raspberry Pi PoE Splitter 5V [2-Pack] - Active PoE to Micro USB Adapter, IEEE 802.3af Compliant, for Tablets, Dropcam and Raspberry Pi 2/3, and More

What is it - A 5v UCTRONICS PoE splitter to split the PoE signal into micro USB power supply and Ethernet in RJ45, so that non-PoE devices can be powered over Ethernet. Reportedly used on micro USB devices like Raspberry Pi, Amazon Ethernet Adapter for Fire TV, Amazon Cloud Cam, Echo Dot (2nd Gen), Wyze Cam v2, Arlo 2 Pro, ASUS Tinker Board, Nano Pi, Chromecast, and so on
What is PoE - PoE enables you to deliver power and data with a single Ethernet cable, and thus fewer wall plugs are needed and fewer cables are messed. It also helps you extend powerline to where there are no AC outlets nearby but your Ethernet cable can reach, up to 300 feet away from the power source
What’s special about it - PoE to Micro USB. That means it adds plug-and-play PoE support to Raspberry Pi models even they are not 3 B+ and cannot accommodate a Raspberry Pi PoE HAT. It makes full use of PoE switches because the other end of the PoE port could be any micro USB devices instead of a 48V PoE network device
What else is needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment,) an Ethernet cable with the proper length you need, and devices powered via micro USB. These are not included in our package
Note - 1: Just put the split Ethernet aside if you don’t need the data. 2: For one pack, check B01MDLUSE7; For gigabit PoE switch or a Raspberry Pi 3 B+, check Gigabit PoE splitter B07CNKX14C; For 12V barrel port, check B01MPWW2UV. 3: The Split Ethernet cable does not carry power, but you can add a USB Ethernet adapter to it if your device takes network from USB

Rank No. #9

IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable, Works on all POE Switches, POE NVR and POE Cameras, Mode A and B POE Compatible

Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender "Combiner" unit and a receiver "Splitter" unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done!
Reduces cabling costs. Let's say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch or NVR, you can now just run 1. Works great for both new and existing installs. Easy and Cost Effective.
Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this splitter set to make your installation much easier and avoid running another long cable.
The Splitter Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. Full IP68 Rating gives this unit the ultimate weather protection and can directly be exposed to rain, sleet, snow, ice, and the sun.
Simple plug n play installation. Works with all standard 802.3af/at POE switches and POE NVRs that use standard active POE. Works on most all brands POE Switches, Cameras and POE NVRs. Don't be fooled by other cheaper combiners on the market that only work on POE Switches. IPCamPower's Combiner works on all POE Switches, POE NVRs and POE IP Cameras and supports both Mode A and B POE making it the most flexible and compatible POE Combiner/Splitter on the market.

Rank No. #10

4-Pack PoE Splitter 12V 1.2A, Active PoE to 2.1mm DC - IEEE 802.3af/at Compliant, Up to 328ft Power Over Ethernet, Crafted with Premium USA Chipset & Opto-Isolator: for Non-PoE IP Cameras(13.5W)

【Advanced Technology】: We've elevated our PoE Splitter using superior USA chipset & opto-electronic isolation, ensuring higher compatibility, incredible stability, and unparalleled security compared to competitors
【Versatile Application】: The perfect bridge between all types of PoE switches or PoE injectors and non-PoE network devices. Specially designed for those requiring 12V,1.2A(max) DC input & ethernet input, like IP cameras
【Efficient Input & Output】: Adheres to INPUT standards of IEEE 802.3af/at(DC40-57V) from PoE switch or PoE injector and delivers OUTPUT at 18W,12V/1.2A(max) DC(5.5mm x 2.1mm Male), with 10/100Mbps ethernet data, maintaining seamless operations
【Reliable Protection】: Uniquely engineered with robust multi-protection circuits to prevent overvoltage, short-circuiting, and overcurrent, ensuring the ultimate peace of mind
【Extended Guarantee】: Our commitment to your satisfaction is backed with a full TWO-year warranty. Our engineering team is also available 24/7 for comprehensive technical support

Last update on 2026-05-21 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Active Poe Splitter?

Do you get stressed out thinking about shopping for a great Active Poe Splitter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Active Poe Splitter, which is why we have assembled a comprehensive list of the greatest Active Poe Splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Active Poe Splitter that you consider buying. Your questions might include the following:

Is it worth buying an Active Poe Splitter?
What benefits are there with buying an Active Poe Splitter?
What factors deserve consideration when shopping for an effective Active Poe Splitter?
Why is it crucial to invest in any Active Poe Splitter, much less the best one?
Which Active Poe Splitter are good in the current market?
Where can you find information like this about Active Poe Splitter?

We’re convinced that you likely have far more questions than just these regarding Active Poe Splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Active Poe Splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Active Poe Splitter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Active Poe Splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Active Poe Splitter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Active Poe Splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Active Poe Splitter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Active Poe Splitter.
Customer Ratings: Number ratings grade Active Poe Splitter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Active Poe Splitter.
Product Quality: You don’t always get what you pay for with an Active Poe Splitter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Active Poe Splitter is should be an indication of how long it will work out for you.

We always remember that maintaining Active Poe Splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Active Poe Splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Active Poe Splitter of 2025 – Reviewed and Top Rated

How Do You Buy The Best Active Poe Splitter?

Related Post: