Skip to content

The Best arduino pro micro pinout of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best arduino pro micro pinout of 2022. Check our ranking below.

2,653 Reviews Scanned

SaleRank No. #1
Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino
  • Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html; http://www.wch-ic.com/download/list.asp?id=127 (windows); http://bit.ly/2pMF4in.
  • If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
Rank No. #2
AITRIP 4PCS Pro Micro Atmega32U4 5V 16MHz Bootloadered IDE Micro USB Pro Micro Development Board Microcontroller Compatible with Pro Micro Serial Connection with Pin Header
  • ATmega32U4 running at 5V/16MHz
  • Supported by IDE v1.0.1
  • Rx and Tx Hardware Serial Connection
  • 4 x 10-bit ADC pins, 12 x Digital I/Os
  • On-Board Micro-USB connector for programming
Rank No. #3
KOOKYE 3PCS Pro Micro ATmega32U4 5V/16MHz Module Board 2 Row Pin Header for Arduino Mini Leonardo
  • 【ATmega32U4 microcontroller】-The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.
  • 【Multi-channels】-This tiny little board does all of the neat tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
  • 【USB Port Reinforced】-This latest revision reinforced the USB port and make it more stronger solder points.
  • 【Voltage regulator】-There is a voltage regulator on board so it can accept voltage up to 9V DC.The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
  • 【Anti-ESD Package】The boards came in a box package with a pinout diagram printed on, each in their own anti-ESD(Electronic Static Discharge) bag with 3 rows of header pins.
Rank No. #4
HiLetgo 3pcs Pro Mini Atmega328P 5V/16MHz Development Board Compatible with Arduino pro Mini
  • Chipset: Brand new Atmel Atmega328P-AU.
  • Pinout is identical to Pro Mini.
  • Bootloadered already in the board, easy to get started.
  • Support power supply by external 3.3V~12V DC power and 9V battery power.
  • Support serial downloading, 100% Compatible to all Pro MIni series shields and sensors.
Rank No. #5
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
  • Ideally for use with the 3.3V Pro Trinkets & ItsyBitsy
  • Charging is performed in three stages
  • Will work with any size battery and USB port
SaleRank No. #6
Seeed Studio Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor for Gamecube, 1pc.
  • Notice: We only provide after-sales service purchased from Seeed Studio
  • 🌱【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.
  • 🌱【Multiple Software Support】Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
  • 🌱【Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.
  • 🌱【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.
SaleRank No. #7
REXQualis RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO.
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm/0.32".
  • Packing list: 1x terminal block breakout module(NOTE: the item not include Raspberry Pi Board).
Rank No. #8
Arduino Nano RP2040 Connect with Headers [ABX00053]
  • Arduino Nano RP2040 Connect adds Wifi and Bluetooth to the Raspberry-Pi RP2040 microcontroller, provided by a separate U-blox Nina W102 module and integrated antenna, creating the perfect IoT device, to connect sensors and actuators.
  • This board can be programmed entirely online, using the Arduino Cloud and the Arduino IoT Remote smartphone app.
  • Arduino Nano RP2040 comes with a dual core 32-bit Arm Cortex-M0+ processor, that has a high performance energy efficiency, while clocked at 133 MHz. It allows the exploration of embedded Machine Learning algorithms out of the box, and is perfect for learning TinyML, TensorFlow Lite or Edge Impulse.
  • On board: 6-axis IMU sensor to detect movement and gestures, a ATECC608A Cryptographic Coprocessor, an integrated microphone, 20 Digital I/O, 8 Analogue pins, 20 PWM, 8 Programmable I/O (PIO) for custom peripheral support, UART, SPI, I2C bus and a micro USB connector to provide peripheral connectivity.
  • Besides the Arduino language, you can also program the Arduino Nano RP2040 Connect in MicroPython and CircuitPython, via the free of charge OpenMV IDE. With 16MB flash memory external to the microprocessor, there’s plenty of room for your code and onboard data storage.
Rank No. #9
IWISS 1550PCS 2.54mm Pitch Wire-to-Wire Dupont Connector Kit, includes Pin Headers, Jumper Wire, Crimp Pins for RC Servo, Arduino, SMT, SATA, EPS, PCIE, Battery Balancer
  • 1550PCS Dupont Connector Kit includes a variety of connectors: single row pin headers, bent pin headers, crimp pin connector housings, male and female crimp pins for wires.
  • The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal plastics, ensuring that the connectors are well-protected, reducing the chances of early degradation and increased cycles/minute of the connector subjected to harsh environments.
  • Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male terminal, all manufactured with precision-fitting and durability ensuring accurate mating.
  • The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low smoke, toxicity and flammability requirements of almost all industries.
  • It offers a crimp style lock and a configuration which prevents users from inverted insertion. It is well-engineered to be air-tight, preventing oxygen and moisture from reaching the metals, causing corrosion.
Rank No. #10
HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO.
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm/0.32".
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi Board).

Last update on 2022-09-27 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best arduino pro micro pinout?

Do you get stressed out thinking about shopping for a great arduino pro micro pinout? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching arduino pro micro pinout, which is why we have assembled a comprehensive list of the greatest arduino pro micro pinout available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for arduino pro micro pinout that you consider buying. Your questions might include the following:

  • Is it worth buying an arduino pro micro pinout?
  • What benefits are there with buying an arduino pro micro pinout?
  • What factors deserve consideration when shopping for an effective arduino pro micro pinout?
  • Why is it crucial to invest in any arduino pro micro pinout, much less the best one?
  • Which arduino pro micro pinout are good in the current market?
  • Where can you find information like this about arduino pro micro pinout?

We’re convinced that you likely have far more questions than just these regarding arduino pro micro pinout, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for arduino pro micro pinout, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible arduino pro micro pinout. Make sure that you are only using trustworthy and credible websites and sources.

We provide an arduino pro micro pinout buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available arduino pro micro pinout currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of arduino pro micro pinout has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an arduino pro micro pinout?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your arduino pro micro pinout.
  5. Customer Ratings: Number ratings grade arduino pro micro pinout objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their arduino pro micro pinout.
  7. Product Quality: You don’t always get what you pay for with an arduino pro micro pinout, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an arduino pro micro pinout is should be an indication of how long it will work out for you.

We always remember that maintaining arduino pro micro pinout information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding arduino pro micro pinout is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: