Skip to content

The Best Artillery Sw X1 of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Artillery Sw X1 of 2022. Check our ranking below.

2,230 Reviews Scanned

Rank No. #1
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer
  • 1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer
  • 2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level
  • 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock.
  • 4.Direct drive extruder, great support for flexible filament.
  • 5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase.
View Product
Rank No. #2
Upgraded Smooth/Textured Pea+PEI Sheet 310x310mm Dual-Sides Specular Effect Spring Steel Build Plate Magnetic Flexible Print Bed with Base for Cr-10s Cr-10 Anet A8+ Artillery SW-X1 X2 3D Printer.
Upgraded Smooth/Textured Pea+PEI Sheet 310x310mm Dual-Sides Specular Effect Spring Steel Build Plate Magnetic Flexible Print Bed with Base for Cr-10s Cr-10 Anet A8+ Artillery SW-X1 X2 3D Printer.
  • 1. 【Innovative Material】：The innovative PEA material makes the bottom of printed parts flatter and smoother, while retaining a glass-like reflectivity, maintains stronger adhesion and durability, and performs better in low-temperature printing, completely eliminates the problem of bubbles. And PEI is a superior material offer many benefits over PEO/PET. It's more resistant to high temperatures and wear, and provides better adhesion, making it perfect for ABS, PC, PETG, TPU, TPE, and RYNO.
  • 2.【Textured/Smooth Design】：Compared with the only smooth or textured surface, the Textured/Smooth design can meet different printing needs. Among them, the printing effect of the textured surface is more matte, and the printing effect of the smooth surface is more delicate.Size 310x310mm/12.2x12.2inch upgraded PEA+PEI sheet is suitable for Cr-10s/ Cr-10/ Anet A8+ /Tevo Tornado/ Nereus /Artillery /SW-X1/ X2/ Tenlog D3 Pro/ Longer LK1 3D Printer.
  • 3. 【Proven Solution】： While PEA + PEI may be more expensive, we believe in providing the best quality products to our customers. No scraping, easy to remove the printed matter from the platform by slightly bending. The solution has been successfully applied to various sizes and models of 3D printers, and the experimental results show that the product can be repeated use as new through hundreds of tests.
  • 4.【Easy to Use】：Do not need glue, beauty pattern paper and other fixed ways, just use isopropyl alcohol to clean the flexible build plate surface, heat the hotbed to the right temperature according to the kind of filament (generally PLA materials need a hot bed to about 60 °), and then start printing.After printing, just slightly bend the PEI sheet platform, you can remove the print easily.(Note:The smooth surface has a factory protective film that needs to be removed.)
  • 5.【Commitment】：All products are inspected before shipment.Considering that the transportation time is long，if you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
View Product
Rank No. #3
HICTOP Double Sided PEI Sheet 310x310mm Smooth/Textured Magnetic Sheet with Adhesive for CR-10 CR-10S Artillery SW-X1, SW-X2 3D Printers
HICTOP Double Sided PEI Sheet 310x310mm Smooth/Textured Magnetic Sheet with Adhesive for CR-10 CR-10S Artillery SW-X1, SW-X2 3D Printers
  • 1.The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
  • 2.The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.
  • 3.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
  • 4.Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
  • 5.The size of HICTOP PEI sheet is 310x310mm（12.2*12.2inch), it is applicable with CR-10, CR-10S,Tenlog D3 pro,Longer LK1, Artillery SW-X1, SW-X2 and other same sized 3D printers
View Product
Rank No. #4
RETUXEP Flexible PEO+PEI Textured Print Build Plate 310x310mm, Smooth PEO+PEI Spring Steel Bed Plate for CR-10, Artillery SW-X1/X2, Anet A8 Plus
RETUXEP Flexible PEO+PEI Textured Print Build Plate 310x310mm, Smooth PEO+PEI Spring Steel Bed Plate for CR-10, Artillery SW-X1/X2, Anet A8 Plus
  • 【Compatible Printer】310x310mm PEI surface +PEO surface spring steel sheet, compatible with CR-10, Artillery SW-X1/X2, Anet A8 Plus.
  • 【Package Included】 PEI PEO sheet (no adhesive magnetic sticker), the build plate size is 310x310mm.
  • 【High Temperature Resistant】The PEI bed can be resistant to 260°C for the nozzle without deformation. The PEO surface can work at a high temperature of 120°C
  • 【Upgraded Double Sided Printing】Double-sided PEO+PEI spring steel plate , one side is smooth diamond type print surface--upgraded PEO film. The other side is PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
  • 【Flexible and Easy to Remove】The PEI+PEO spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or bend the build plate and remove the prints. The print mat won’t be out of shape.
View Product
Rank No. #5
LANKEGU PEI + PEO Double Side Build Plate for CR-10, Kobra Plus, 3D Printer Textured PEI + Smooth PEO Spring Steel Plate and Magnetic Base Bed for CR-10S, Artillery SW-X1/X2, Anet A8 Plus 310x310mm
LANKEGU PEI + PEO Double Side Build Plate for CR-10, Kobra Plus, 3D Printer Textured PEI + Smooth PEO Spring Steel Plate and Magnetic Base Bed for CR-10S, Artillery SW-X1/X2, Anet A8 Plus 310x310mm
  • PEI+PEO Double Side Build Plate: PEO diamond printing surface, the smooth surface makes it easy to paste the model on the PEO platform, the first layer of the printed model is smooth.. Premium PEl powder coating, with heat and wear-resistant, frosted PEl powder coating, the plate surface is not easy to get scratched or damaged, the first layer of the printed model is is textured.
  • Easy Model Removal: The selected spring steel is made with high flatnessand good elasticity, ensuring easy model removal.lt won't be deformed after being bent repeatedly.
  • Strong Magnetic Force Not Easy to Dislocate: Strong magnetic stickers help it maintain high adhesion at high temperatures which ensures better print stability, the stainless steel plate will not shift during printing, causing printing failure.
  • Wide Compatibility: Applicable to most materials such as PLA , ABS, ASA, PETG,TPU, PC, PA, etc. PEO side is recommended for printing PLA, TPU and PETG filament. PEI side is recommended for printing PLA , PETG, PC, ABS, TPU , Nylon etc filament.
  • Compatible Models: The size of this PEI + PEO Double Side build plate is 310x310mm, which is compatible with CR-10, CR-10S, Kobra Plus, Artillery SW-X1/X2, Anet A8 Plus and other 310x310mm 3D printers.
View Product
Rank No. #6
Extruder Kit - 3D Printer Nozzle Silicone Sleeve Heating Throat Tube Handle Thermistor DIY Replacement Parts for Artillerys Sidewinder X1
Extruder Kit - 3D Printer Nozzle Silicone Sleeve Heating Throat Tube Handle Thermistor DIY Replacement Parts for Artillerys Sidewinder X1
  • Material: 3D printer accessories, made of metal, brass and siliocne materials, durable and solid.
  • Nozzles: 9Pcs nozzles set: 0.4mm, 0.3mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm nozzles fit 3D printer, difference size, satified your every need.
  • Replacement Parts: These parts can replace the old or damaged part of the 3D printers. Must-have accessories for your printer: upgrade arm, more durable.
  • Thermistor: Set comes with thermistor: built-in NTC100K thermistor size φ3x5mm/0.12 x 0.2inch terminal XH2.54 2pin male head with terminal cable length 70mm/2.76inch.
  • Heating Rod: Set comes with 1Pc x heating rod: 24V, 64W, size φ6x20mm/0.24 x 0.79inch, terminal VH3.96, 2PIN, male shell, cable length with terminal 50mm/1.97inch.
View Product
Rank No. #7
HICTOP E3D Volcano Heater Block Silicone Socks Silicone Cover fits for Artillery SW-X1 and Other Similar 3D Printers Pack of 3
HICTOP E3D Volcano Heater Block Silicone Socks Silicone Cover fits for Artillery SW-X1 and Other Similar 3D Printers Pack of 3
  • 1.Compatible with Artillery SW-X1 and other E3D volcano heat block 3D printers.
  • 2.The E3D volcano silicone socks keep your hotend clean and neat.
  • 3.This silicone sock speeds up the heating of the heat block and keeps the temperature stable while printing.
  • 4.It prevents sticky filaments from sticking on the hotend and extends the life of the hotend
  • 5.It perfectly fits the E3D volcano hotend and easy to install.
View Product
Rank No. #8
3D Printer Upgraded Tempered Glass Plate(310 X 310x4mm) with 4 pcs Clips, 3D Printer Platform Glass Bed Build Surface Print Bed for Artillery SW-X1/SW-X2/CR-10/CR-10S/Tevo Tornado/Anet A8 Plus
3D Printer Upgraded Tempered Glass Plate(310 X 310x4mm) with 4 pcs Clips, 3D Printer Platform Glass Bed Build Surface Print Bed for Artillery SW-X1/SW-X2/CR-10/CR-10S/Tevo Tornado/Anet A8 Plus
  • 【Highly Cost Effective】The tempered glass bed comes with 4pcs clips. They can help to fix the glass plate on the hot bed more easily.
  • 【No Edge Curling】Using the coated tempered glass bed, molds could be stuck on the bed firmly without glue, which can avoid the issue of print edges curling. It is a necessary 3D printer upgraded platform.
  • 【Super Convenient】The models can be easy to taken off by hands without any tools. This tempered glass bed could be cleaned with alcohol or acetone at room temperature.
  • 【Excellent Flatness】The improved 3D printer glass bed provides more flat and more smooth build surface than magnetic mat or PEI spring steel, ensuring higher flatness for the bottom of model. The thickness deviation is between 0.2mm (generally 0.1mm)
  • 【Compatibility】It is applicable with Artillery SW-X1 /SW-X2 / Ender-3 MAX / CR-10 / CR-10S or other hot bed size 310x310/12.2x12.2in model. (Please measure your hot bed and make sure it is the right size for you).
View Product
Rank No. #9
Tofelf 3D Print Bed Textured PEI Surface + Smooth PEO Surface Build Plate with Magnetic Sheet 310x310mm for CR-10, Artillery SW-X1/X2, Anet A8 Plus 3D Printer Platform
Tofelf 3D Print Bed Textured PEI Surface + Smooth PEO Surface Build Plate with Magnetic Sheet 310x310mm for CR-10, Artillery SW-X1/X2, Anet A8 Plus 3D Printer Platform
  • 【Textured PEI + Smooth PEO Magnetic Build Plate】PEI + PEO double-sided printing platform, one side is a smooth PEO platform, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping.
  • 【Good Adhesion】The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before remove the model to avoid damaging the coating.
  • 【Compatible Filaments】PEO build plate surface can print PLA and TPU and PETG. You'll need glue if you print other materials. PEI surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon.
  • 【Flexible and Easy to Remove】The PEI+PEO spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or bend the build plate and remove the prints. The print mat won’t be out of shape.
  • 【Compatible 3D Printer】The double-sided textured PEO+PEI sheet fit 3D printers with a platform size of 310x310mm, such as for Ender CR-10, for Artillery SW-X1/X2, Anet A8 Plus. Please confirm your 3D printer platform size before ordering.
View Product
Rank No. #10
2PCS Upgraded 310x310mm Smooth+Textured Thicker Pea PEI Sheet Spring Steel Flexible Build Plate with Magntic Base for Cr-10s Cr-10 Anet A8+ Artillery SW-X1 X2 3D Printer.
2PCS Upgraded 310x310mm Smooth+Textured Thicker Pea PEI Sheet Spring Steel Flexible Build Plate with Magntic Base for Cr-10s Cr-10 Anet A8+ Artillery SW-X1 X2 3D Printer.
  • 【Affordable Package】: In order to meet the needs of customers , especially the pursuit of matte and glossy printing results, we provide this cost-effective package. The package includes:1x Single side Smooth PEA Sheet build plate+1 x Dual-Side Textured PEI Pro Spring Steel Build Plate+ 1x Magnetic base.Size 310x310mm/12.2x12.2inch upgraded PEA+PEI sheet is suitable for Cr-10s/ Cr-10/ Anet A8+ /Tevo Tornado/ Nereus /Artillery /SW-X1/ X2/ Tenlog D3 Pro/ Longer LK1 3D Printer.
  • 【Upgrade PEI Pro】:New Version Formula PEI Pro, Moredelicate sandblasted texture and sturdy.It maintains stronger adhesion and durability than PEI, and performs better in low-temperature printing. Perfect for PLA, PEEK, ABS. This version is thicker than the original, with a more delicate spray texture and thicker spring steel plates. For different consumables, higher viscosity can be maintained at lower temperatures.
  • 【Innovative Material 】：The innovative PEA material makes the bottom of printed parts flatter and smoother, while retaining a glass-like reflectivity, maintains stronger adhesion and durability than PEO/PET, and performs better in low-temperature printing, completely eliminates the problem of bubbles.
  • 【Easy to Use】：Do not need glue, beauty pattern paper and other fixed ways, just use isopropyl alcohol to clean the flexible build plate surface, heat the hotbed to the right temperature according to the kind of filament (generally PLA materials need a hot bed to about 60 °), and then start printing.After printing, just slightly bend the PEI sheet platform, you can remove the print easily.(Note:The smooth surface has a factory protective film that needs to be removed.)
  • 【Commitment】：PEI is a superior build surface material that offers a range of benefits over traditional PEO/PET. It's more resistant to high temperatures and wear, and provides better adhesion.While PEI may be more expensive, we believe in providing the best quality products to our customers.All products are inspected before shipment,if you have any questions please feel free to contact us.
View Product

Last update on 2023-11-18 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Artillery Sw X1?

Do you get stressed out thinking about shopping for a great Artillery Sw X1? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Artillery Sw X1, which is why we have assembled a comprehensive list of the greatest Artillery Sw X1 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Artillery Sw X1 that you consider buying. Your questions might include the following:

  • Is it worth buying an Artillery Sw X1?
  • What benefits are there with buying an Artillery Sw X1?
  • What factors deserve consideration when shopping for an effective Artillery Sw X1?
  • Why is it crucial to invest in any Artillery Sw X1, much less the best one?
  • Which Artillery Sw X1 are good in the current market?
  • Where can you find information like this about Artillery Sw X1?

We’re convinced that you likely have far more questions than just these regarding Artillery Sw X1, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Artillery Sw X1, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Artillery Sw X1. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Artillery Sw X1 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Artillery Sw X1 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Artillery Sw X1 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Artillery Sw X1?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Artillery Sw X1.
  5. Customer Ratings: Number ratings grade Artillery Sw X1 objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Artillery Sw X1.
  7. Product Quality: You don’t always get what you pay for with an Artillery Sw X1, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Artillery Sw X1 is should be an indication of how long it will work out for you.

We always remember that maintaining Artillery Sw X1 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Artillery Sw X1 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: