Skip to content

The Best Atx Power Supply Breakout Board of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Atx Power Supply Breakout Board of 2022. Check our ranking below.

2,693 Reviews Scanned

Rank No. #1
Electronics-Salon 24/20-pin ATX DC Power Supply Breakout Board Module.
  • Electronics-Salon 24/20-pins ATX DC Power Supply Breakout Board.
  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header.
  • Stand-By and Power-ON indicator LEDs.
  • With latching button switch to control power ON/OFF.
  • High quality 24Amp(per position) screw terminal blocks.
Rank No. #3
PSU Breakout Board ATX Power Supply DC 12V 5V 3.3V Splitter Module Desktop Adapter to USB A Hub Connector Computer Power Source Multi Port Output DIY Parent Child Electronic Kit with High Current Fuse
  • 【24pin 20pin】Compatible with 24-pin and 20-pin ATX mains. When inserting 20 pin, please align to the right. Different PSU may provide different maximum currents.
  • 【Fuse】Yaotech Advanced Technology Extended conversion connector is equipped with 5A and 8A high amp fuses for your choice, one more protection is safer and necessary. Electronic enthusiasts can modify it with soldering tools too.
  • 【Ports】This PC power supply unit Hub has direct current 12V*3, 5V*2, 3.3V*1, -12V*1, USB-A 5V*2 voltage output ports. It can be used for high amperage led desk lamp, smart phone charging, just normal charging, fast charging is not supported, electric toy charging, student handmade items for school, electronic learning & education project, etc.
  • 【Indicator Lights】This PSU converter has independent switch and 4 blue indicator lights to indicate 4 voltage output ports. When the fuse is blown, the corresponding indicator light will go out.
  • 【Feet】We provide 4 insulated feet, when you need to put the pcb board on the metal table, you can install insulated feet to avoid short circuit.
Rank No. #4
HLT New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.
  • 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
  • 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal.
  • 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use.
  • 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
  • 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc.
Rank No. #5
20/24 Pins ATX Benchtop PC Power Breakout Adapter with USB 5V Port 24pin Right Angle ATX 24 pin ATX case pc Power Supply (Green)
  • Designed to take advantage of your power supply to create a benchtop power supply with 4 channel voltages to run almost any of your embedded electronics projects
  • Provide quick access to the typical voltages needed including 3.3V, 5V, 12V and -12V
  • Each output channel has replaceable 5A fuse and corresponding ground connection with binding post easy to connect
  • On-board standard 24pin ATX port, power indicator and power switch easy to control ideal to DIY low voltage power supply for developing physical computing projects (embedded systems)
  • PCB plastic spacer design for preventing short circuit .
Rank No. #6
New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection
  • 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
  • 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal.
  • 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use.
  • 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
  • 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc.
Rank No. #7
ALMOCN 2PCS 24 Pin XH-M229 Benchtop Power Board Computer ATX Power Supply Breakout Adapter Module Desktop Computer Chassis Power Supply ATX Transfer Board 12V 5V 3.3V
  • 4 Output Voltages: Providing quick access to 4 sets of typical output voltages, which including: 3.3V, 5V, 12V and -12V.
  • Each output channel has replaceable 5A fuse and corresponding ground connection with binding post easy to connect.
  • With power light and power switch.
  • 24 Pin: Standard 24pin ATX port.
  • Usage:The benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems).
Rank No. #8
D-FLIFE 4pcs XH-M229 24 Pin Benchtop Power Board Computer ATX Power Supply Breakout Adapter Module Desktop Computer Chassis Power Supply ATX Transfer Board 12V 5V 3.3V
  • The benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems).
  • Provide quick access to the typical voltages needed including 3.3V, 5V, 12V and -12V
  • On-board standard 24pin ATX port, power indicator and power switch easy to control ideal to DIY low voltage power supply for developing physical computing projects (embedded systems)
  • Each output channel has replaceable 5A fuse and corresponding ground connection with binding post easy to connect
  • 24 Pin Benchtop Power Board Computer ATX Power Supply Breakout Adapter Module Desktop Computer Chassis Power Supply ATX Transfer Board 12V 5V 3.3V
Rank No. #9
ATX Power Supply Breakout Board and Acrylic Case Kit, ATX Power Supply Breakout Adapter for MCU Electronic Component Adjustable Voltage Knob 24Pin
  • 【ATX power splitter board】ATX power splitter board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V10.8V (ADJ) output voltage.
  • 【Precise Screw Positioning】The voltage output terminal of the ATX power expansion board corresponds to each screw terminal.
  • 【With an acrylic box】At the same time, the panel is also equipped with an acrylic box kit for easy use.
  • 【Easy to Connect】Compatible with 3.3V: STM32 MCU, network communication equipment, such as WiFi for Bluetooth and other devices, generally for microcontrollers, and some lowpower modules, etc. 5V: for Raspberry Pi/Tinker Board/Nano Pi/USB interface, etc.
  • 【Widely Compatible】Compatible with 9V motor drive, display drive module, etc.; 12V motor drive, LED lights, vehicle equipment requiring less than 24w of power, etc.
Rank No. #10
risingsaplings ATX DC Power Supply Breakout Board 24/20-pin
  • Type: 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header.
  • LED design: Stand-By and Power-ON indicator LEDs.
  • Switch design: With latching button switch to control power ON/OFF.
  • High quality screw terminal blocks for fast connections.
  • Package list: 24-pins Standard ATX Connector x 1 pcs

Last update on 2023-09-21 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Atx Power Supply Breakout Board?

Do you get stressed out thinking about shopping for a great Atx Power Supply Breakout Board? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Atx Power Supply Breakout Board, which is why we have assembled a comprehensive list of the greatest Atx Power Supply Breakout Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Atx Power Supply Breakout Board that you consider buying. Your questions might include the following:

  • Is it worth buying an Atx Power Supply Breakout Board?
  • What benefits are there with buying an Atx Power Supply Breakout Board?
  • What factors deserve consideration when shopping for an effective Atx Power Supply Breakout Board?
  • Why is it crucial to invest in any Atx Power Supply Breakout Board, much less the best one?
  • Which Atx Power Supply Breakout Board are good in the current market?
  • Where can you find information like this about Atx Power Supply Breakout Board?

We’re convinced that you likely have far more questions than just these regarding Atx Power Supply Breakout Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Atx Power Supply Breakout Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Atx Power Supply Breakout Board. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Atx Power Supply Breakout Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Atx Power Supply Breakout Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Atx Power Supply Breakout Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Atx Power Supply Breakout Board?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Atx Power Supply Breakout Board.
  5. Customer Ratings: Number ratings grade Atx Power Supply Breakout Board objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Atx Power Supply Breakout Board.
  7. Product Quality: You don’t always get what you pay for with an Atx Power Supply Breakout Board, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Atx Power Supply Breakout Board is should be an indication of how long it will work out for you.

We always remember that maintaining Atx Power Supply Breakout Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Atx Power Supply Breakout Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: