Skip to content

The Best Bluetooth Receiver Module of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Bluetooth Receiver Module of 2022. Check our ranking below.

2,354 Reviews Scanned

Rank No. #1
DS18 BT-Two Bluetooth Receiver - IP65 Waterproof Rated, BT 4.0, Remote Trigger Output, Stero Male RCA Output - Allows Connect & Play Integration to Your Audio Device
  • ENDLESS CONNECTION POSSIBILITIES - Whether you're taking the boat out on the water or looking to get some mud on the tires, you'll be able to connect anywhere you go.
  • BLUETOOTH 4.0 - Some of the benefits you'll experience include fast device pairing, low latency communication and low power consumption.
  • IP65 MARINE GRADE COMPLIANT - You're protected against dust that may harm your equipment and against water spray from all directions.
  • LOW CURRENT DRAW - At only 20mA of power, you don't have to worry about special power solutions in your vehicle. The BT-TWO is the perfect addition.
  • NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
Rank No. #2
MakerHawk 2pcs Bluetooth Audio Receiver Board BT 5.0 Stereo Audio Amplifier 3.7-5V Car Speaker Amplifier for DIY
  • Decoding Format: WAV+APE+FLAC+MP3 lossless decoding, stereo output.
  • BT5.0-Audio: Genuine 5.0 Blue tooth audio decoding chip. Supports incoming voice calls and can be used as a computer sound card.
  • Transmission Distance: 15m transmission under barrier-free environment.
  • Application: With the basic functions of B T5.0 Audio, long-distance transmission, lossless sound quality, Blue tooth 5.0 is backward compatible with Blue tooth 4.2, 4.1, 4.0.
  • Choose between USB power supply and battery power supply: This product has a discharge function and can be powered by a USB power supply. Note: If the USB is suddenly disconnected during playback, Blue tooth will automatically restart, automatically connect and maintain the previous playback state (Note: The product cannot be charged)
Rank No. #3
Blue~Tooth Board, DROK 12V Audio Receiver Blue~Tooth Module DC 5V-12V Portable Wire~Less Electronics Stereo Music Receive Circuit Chip with Micro USB Port for Headphone Speaker Home Sound System DIY
  • PARAMETER --- input voltage range DC 5V-12V, support micro USB 5V power supply; blue~tooth version 4.2.
  • APPLICATION --- headphone, speaker, home stereo system DIY.
  • INPUT METHOD --- 3.5mm AUX input & 2.54mm 3P AUX input.
  • OUTPUT METHOD --- 3.5mm audio output & 2.54mm 3P audio output.
  • LED INDICATOR --- indicates status of waiting for a connection/connected/audio playing.
Rank No. #5
Archuu Bluetooth MP3 Decoding Board Module, Universal Bluetooth 5.0 MP3 WAV Decoding Board Module MP3 Decoder Board with Bluetooth Call Speaker Amplifier Audio Receiver Module(Black)
  • 【BLUETOOTH 5.0 decoding board】Decoding board supports Bluetooth version 5.0 + APP control and hands-free calling. After pairing with your phone, wirelessly receive the phone to play all formats of music, if your phone supports a wide range of formats, you want to listen to any format of music does not matter, and also hands-free phone calls (when the caller hears "beep-beep" press the pause button to answer the phone)
  • 【Fully functional】Support APP control, 4 color color screen, the effect is more moving; USB/TF play MP3 lossless APE/WAV/WAV/WMA/FLAC can also support folder selection playback; FM radio; 3.5AUX; stereo Bluetooth can also be hands-free call oh caller and the number, DIY speakers and modified audio / car can not be a valuable tool.
  • 【Module feature】Product design for power on default Bluetooth, support 4 color spectrum luminous display; if there is a card or U disk in the product power on directly play music. mp3 decoder support USB / card switch, the previous song, the next song, volume adjustment, EQ, play / pause, stop, single song repeat, mute, shutdown, direct song selection. It also supports power-off memory function.
  • 【Voltage requirement】Voltage 5V or DC DC 7V-12V, current 800MA-1A; panel IN port for audio input and charging input (limited to 5V and is a lithium-powered style) dual-use please select the special line (otherwise the order is not defined correctly mess up the product), charger please use the USB charger with charging reminder: charging is red light, full is green light at this time do not charge again. The decoding board itself does not come with charging reminder function
  • 【After-sales service】If you have any questions about the use or dissatisfaction with our products, please feel free to contact us, our professional customer service team will sincerely consult, thank you for buying from us!
Rank No. #6
5PCS Audio Receiver Module, Aideepen BT 5.0 Stereo Audio Amplifier 3.7-5V MP3 Decoder Board Car Speaker Audio Amplifier
  • 【BT5.0】2 Channel Stereo Amplifier with audio decoding chip. Compatible with BT 4.2, 4.1, 4.0.Also can be used as a computer sound card.
  • 【Decoding Format】WAV+APE+FLAC+MP3 lossless decoding, stereo output.
  • 【DC 3.7-5V】Working voltage: DC 3.7-5V. It can be transmitted to 15 meters in barrier -free environment.
  • 【Support profile】A2DP / AVCTP / AVDTP
  • 【WHY choose us】Aideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us.
Rank No. #7
EPLZON Blue Tooth Audio Receiver Module B T 5.0 Stereo Audio Amplifier 3.7-5V MP3 Bluetooth Decoder Board Car Speaker Audio Amplifier
  • ✅BT5.0-Audio: Genuine 5.0 Bluetooth audio decoding chip. Supports incoming voice calls and can be used as a computer sound card.
  • ✅Transmission Distance: 15m transmission under barrier-free environment.
  • ✅Decoding Format: WAV+APE+FLAC+MP3 lossless decoding, stereo output.
  • ✅Support profile: A2DP / AVCTP / AVDTP / HFP
  • ✅Application: With the basic functions of BT5.0 Audio, long-distance transmission, lossless sound quality, Bluetooth 5.0 is backward compatible with Bluetooth 4.2, 4.1, 4.0.
Rank No. #8
Car 12V Aux Bluetooth 5.0 Adapter Module Music Receiver Car kit with 2 RCA Input Aux Audio for Car Radio Stereo Speaker
  • Just plug the connector into(ACC/GND)AUX the socket back of your radio
  • You can just Insert this item to the back radio then Connect the red wire to 12V+, the black wire to 12V-.
  • bluetooth 5.0 version, also support 3.0 /2.0, fits WMA, WAV, FLAC.
  • Choose AUX from your radio and you can play music from your phone in your car.
  • Match your phone or pad to bluetooth module.and Choose Aux from your radio, then you can use your phone to play music through car speakers. You can hear music from your phone/pad/mp3(They should have blueooth function)./
Rank No. #9
HiLetgo 3pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
  • Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND. The maximum operating current is 5V2A. It is recommended to use a regulated 5V2A power supply for better sound quality.
  • Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the module amplifier output. Audio output: output left and right stereo audio signals, which can be connected to two 2-8 ohm, 3-5W speakers, and 4 Euro 5W speakers.
  • This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
Rank No. #10
Bluetooth Power Amplifier Board 2.0 Dual Channel Stereo Wireless Mini Amp Module with Protective Shell(XY-P15W)
  • DIY BLUETOOTH SPEAKER - Just need a battery/power and two speakers then you will get a nice Bluetooth speaker. It serves as a nice way to have music at home or somewhere without having to dock the phone or plug it in. Say goodbye to those messy wires.
  • BLUETOOTH 5.0 - Bluetooth version 5.0 is compatible with most devices and phones on the market. You are free to control the module in 15 meters range.
  • HIGH POWER AMPLIFIRER - This stereo audio amp module works with DC 8V-24V and 4-16 ohm 30W-150W speakers. The sound was excellent and you won’t hear any crackles or electrical noise.
  • SAFE TO USE - The Bluetooth receiver board supports reverse protection, short circuit protection and overheat protection. High-quality components and pcb board make your homemade Bluetooth speakers stand the test of time.
  • EASY TO CONTROL&ADJUST - There is a single control knob that pauses the music and adjusts the volume. Connecting was simple. Just connect the Bluetooth named ”XY-P15W” then you can play the music. It will automatically reconnect after power cycling the unit.

Last update on 2022-09-04 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Bluetooth Receiver Module?

Do you get stressed out thinking about shopping for a great Bluetooth Receiver Module? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Bluetooth Receiver Module, which is why we have assembled a comprehensive list of the greatest Bluetooth Receiver Module available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Bluetooth Receiver Module that you consider buying. Your questions might include the following:

  • Is it worth buying an Bluetooth Receiver Module?
  • What benefits are there with buying an Bluetooth Receiver Module?
  • What factors deserve consideration when shopping for an effective Bluetooth Receiver Module?
  • Why is it crucial to invest in any Bluetooth Receiver Module, much less the best one?
  • Which Bluetooth Receiver Module are good in the current market?
  • Where can you find information like this about Bluetooth Receiver Module?

We’re convinced that you likely have far more questions than just these regarding Bluetooth Receiver Module, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Bluetooth Receiver Module, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Bluetooth Receiver Module. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Bluetooth Receiver Module buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Bluetooth Receiver Module currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Bluetooth Receiver Module has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Bluetooth Receiver Module?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Bluetooth Receiver Module.
  5. Customer Ratings: Number ratings grade Bluetooth Receiver Module objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Bluetooth Receiver Module.
  7. Product Quality: You don’t always get what you pay for with an Bluetooth Receiver Module, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Bluetooth Receiver Module is should be an indication of how long it will work out for you.

We always remember that maintaining Bluetooth Receiver Module information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Bluetooth Receiver Module is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is a Bluetooth audio stereo module?

A: These modules take in Audio data via Bluetooth and transmit it through Serial communication. For those planning to use a Bluetooth audio stereo module in their project, we have listed the best Bluetooth stereo modules available right now.

Q: What is the range of Bluetooth audio receiver?

A: It is a Bluetooth Audio Receiver board/Multifunction Player, Power: DC5V; Effective bluetooth transmission distance: 10~15 meters. Three kinds of audi..

Q: What is the best Bluetooth Audio Receiver board?

A: Bluetooth Audio Receiver Board Wireless Stereo HIFI Amplifier Sound Module by Tiny Shine(16.94$) One of the most compact boards on our list as it has the dimensions of 42*32*11mm. The board has a micro USB female port and is entirely compatible with Bluetooth 4.0.

Q: What is the Bluetooth 5 module?

A: Longer-range, multi-wireless capabilities and extended temperature range bring Bluetooth 5.1 connectivity to the harshest RF environments. The small form factor Bluetooth 5 module delivers more power and range performance ideal for long-range applications or extremely challenging RF environments.

Related Post: