The Best Cctree Build Surface of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Cctree Build Surface of 2022. Check our ranking below.

2,051 Reviews Scanned

Rank No. #1

CCTREE Double Sided Textured PEI Sheet for QIDI X-Max 3, PEI Spring Steel Build Plate Flexible Print Bed Removable Surface Platform for QIDI X-Max 3, Geetch A30 Pro 3D Printers, 330 * 330 mm

【Double Sided Textured PEI Plate】This is a Double Sided Textured PEI plate for QIDI X-Max 3 printers which present different textures, double sided printing and cost-effective. size：330*330CM, it fits perfectly with the Flsu Core-XY,Troxy X3S/ X5SA/X5SA Pro,Geetch A30,A30 Pro,Qid1 X-Max3, Neptun 3/4 Plus/Rais 3D Pro 2/Pro 2 Plus 3D Printer
【Effortless Model Removal】When the build plate cool down to the room temperature, no need other tools and the model effortlessly separates from the plate
【Clean the Build Plate】For better adhesion, please spray with isopropyl alcohol and wipe the build plate with a lint-free towel before use, any bit of grease or residue makes your prints non-stick
【Maintenance the Print Bed】Clean the surface regularly with water and alcohol or IPA for optimal adhesion. We recommended the filaments is PLA/TPU/PETG/ABS/Nylon etc. and the high temperature of the heat bed is not exceeding to 260℃
【After-sales service】If you encounter any problems, please contact us through Amazon backend and we will provide technical support

Rank No. #2

CCTREE Double Sided Textured PEI Sheet+Smooth PEI Spring Steel Sheet 310x320mm, Flexible Print Build Plate Removable Surface Platform with Magnetic Bed for Creality Ender 3 Max/CR-10S Pro, Kobra Plus

【Simple Installation】Stick the soft magnetic base to the heating bed of your 3D printer then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
【Textured/Smooth Double-Sided PEI】:Our double-sided PEI flex plate features one powder-coated PEI surface that leaves a textured matte finish on your parts and one smooth PEI end that leaves a glossy, reflective finish on the bottom of your interests!
【Excellent Adhesion】: Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double-sided PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
【Compatibility】The size of PEI sheet is 310*320mm,It is suitable for Creality CR-10S Pro / V2 / V3, Ender 3 Max, AnyCubic Mega X and other 3D printers. If your 3D printer has a 310x320mm heat bed platform, This PEI sheet is compatible with your 3D printer.
【Easy Removal】:his surface is easily removed and flexible. Prints come off the surface easily when the heated bed temperature reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.

SaleRank No. #3

CCTREE Double-Sided PEI Build Plate for Bambu Lab X1/X1C/P1P/P1S/A1 3D Printers, Textured PEI+Smooth PEI Spring Steel Build Plate Flexible Print Bed Removable Surface Platform 257x257mm

【Double Sided PEI Build Plate Design】One side is a Smooth print surface(PEI film). The PEI film surface comes with a protective film (Please tear off the protective film before using). the bottom of the printed model is smooth, and the model is easy to remove and clean. The other side is the PEI frosted surface plate, presenting the frosted sticker surface with a distinctive frosted touch, providing greater adherence to the model and prints without warping. There is no Magnetic Sticker Base.
【Easy to Remove and use】The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high-quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, and then the print bed leveling will automatically go on while the machine powered on
【Good Adhesion】The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before removing the model to avoid damaging the coating
【Compatible 1.75mm Filaments】The print bed surface is resistant to high temperatures of 260℃. It behaves as most PEI would and works great with PLA, TPU, PETG, and ABS, as well as many other filaments. We recommend printing temperatures: PLA 60℃, PETG 70-80℃, ABS 90-100℃
【Compatible 3D Printers】Double-Sided Smooth & Textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering

Rank No. #4

CCTREE Double-Sided Textured PEI Build Plate for Bambu Lab X1/X1C/P1P/P1S/A1 3D Printers, PEI Spring Steel Build Plate Flexible Print Bed Removable Surface Platform 257x257mm

【Double Sided Textured PEI Sheet Design】The product is a flexible spring steel plate with double-sided textured PEI coating. The dual-sided PEI frosted surface, presenting the frosted sticker surface with a distinctive frosted touch, provides greater adherence to the model and prints without warping
【Easy to Remove and use】The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high-quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, and then the print bed leveling will automatically go on while the machine powered on
【Compatible 3D Printers】The double-sided textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering
【Good Adhesion】The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before removing the model to avoid damaging the coating
【High Resistance】The PEI print bed surface is resistant to high temperatures of 260℃. PEI build surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon

SaleRank No. #5

CCTREE PEO Chameleon Build Surface Sticker 235x235mm, 3PCS 3D Print Heat Bed Platform Sticker Without Spring Steel Sheet and Magnetic Base for Creality Ender 5/Pro, Ender 3/Pro/V2/Neo 3D Printers

【Chameleon PEY Build Surface Sticker】Smooth PEY Chameleon surface which shows different colors under different lighting, showing a gradient effect. The price of a 3-pack is more affordable than buying a single-build plate. Since this sticker does not have a spring steel plate design and a magnetic base, you can stick this sticker on an old print platform. Note: The adhesive of this sticker is strong, it is recommended to align the base before sticking it
【Support Various Filaments】PEY Chameleon Build Surface Sticker Support print PLA/ TPU/ PETG 3d Printer Filaments. We Recommend Temp Suggestion: 50℃-70℃,≤90℃. Note: The bottom texture of the model printed with Chameleon PEY does not change color at different angles and lighting
【Easy to install】Stick the Chameleon PEY Build Surface Sticker on the magnetic base. There is a protective film on PEY. Please peel the film before using it. Excellent adhesion, easy model removal. If your printer model has 2 screw head notches on the hot bed platform, align the printer heated bed and trim the excess
【Compatible 3D Printers】The Chameleon PEY Build Surface Build Sticker for 3D printers with 235x235mm/9.2x9.2inch platform size, compatible with Creality Ender 3/ Ender 3X/Ender 3 Neo/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender-3 S1/Ender-3 S1 Pro/Ender 5/Ender 5 Pro,CR20/pro,CP-01, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, LK4 / LK4 Pro, B1, A10M/A10T printers
【After-Service】If you have any questions or need technical support about the product, Please press "Ask a question" through our storefront's page, and report an issue through the “Your Orders” page. We will respond within 24 hours

SaleRank No. #6

CCTREE Double Sided Textured PEI Sheet for QIDI X-SMART3, PEI Spring Steel Build Plate Flexible Print Bed Removable Surface Platform for QIDI X-SMART3 3D Printer, 185 * 185 mm

【 Double-Sided Textured PEI Plate】This is a double-textured PEI plate for QIDI SMART3 printers that presents different textures, and double-sided printing and is cost-effective. size：185*185CM
【Effortless Model Removal】When the build plate cool down to the room temperature, no need other tools and the model effortlessly separates from the plate
【Clean the Build Plate】For better adhesion, please spray with isopropyl alcohol and wipe the build plate with a lint-free towel before use, any bit of grease or residue makes your prints non-stick
【Maintenance the Print Bed】Clean the surface regularly with water and alcohol or IPA for optimal adhesion. We recommended the filaments is PLA/TPU/PETG/ABS/Nylon etc. and the high temperature of the heat bed is not exceeding to 260℃
【After-sales service】If you encounter any problems, please contact us through Amazon backend and we will provide technical support

SaleRank No. #7

CCTREE PET Carbon Fiber Build Surface Sticker 257x257mm, 3PCS 3D Print Heat Bed Platform Sticker Without Spring Steel Sheet and Magnetic Base for Bambu Lab X1/X1C/P1P/P1S/A1 3D Printers

【3 PCS PET Carbon Fiber Build Surface Sticker Design】smooth PET Carbon Fiber surface which can print excellent patterns. The price of a 3-pack is more affordable than buying a single-build plate. Since this sticker does not have a spring steel plate design and a magnetic base, you can stick this sticker on an old printing platform. Note: The adhesive of this sticker is strong, so it is recommended to align the base before sticking it
【Support Various Filaments】PET Carbon Fiber Build Surface Sticker can withstand temperatures up to approximately 80°C; recommended for printing PLA, PETG
【Easy to install】Stick the PET Carbon Fiber Build Surface Sticker on the magnetic base. There is a protective film on PET. Please peel the film before using it. Excellent adhesion, easy model removal
【Compatible 3D Printers】The PET Carbon Fiber Build Surface Sticker is suitable for 3D printers with 257*257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1, Please confirm your 3D printer platform size before ordering
【After-Service】If you have any questions or need technical support about the product, Please press "Ask a question" through our storefront's page, and report an issue through the “Your Orders” page. We will respond within 24 hours

Rank No. #8

CCTREE PEO Diamond Build Surface Sticker 257x257mm, 3PCS 3D Print Heat Bed Platform Sticker Without Spring Steel Sheet and Magnetic Base for Bambu Lab X1/X1C/P1P/P1S/A1 3D Printers

【3 PCS PEO Diamond Build Surface Sticker Design】smooth PEO Diamond surface which can print excellent diamond patterns. The price of a 3-pack is more affordable than buying a single-build plate. Since this sticker does not have a spring steel plate design and a magnetic base, you can stick this sticker on an old printing platform. Note: The adhesive of this sticker is strong, so it is recommended to align the base before sticking it
【Support Various Filaments】For PEO plate we suggest PLA, TPU, and PETG. (The corresponding temperature PLA/TPU: 50-70℃; PETG: 70-80℃.
【Easy to install】Stick the PEO Diamond Build Surface Sticker on the magnetic base. There is a protective film on PEO. Please peel the film before using it. Excellent adhesion, easy model removal
【Compatible 3D Printers】The PEO Diamond Build Surface Sticker is suitable for 3D printers with 257*257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1, Please confirm your 3D printer platform size before ordering
【After-Service】If you have any questions or need technical support about the product, Please press "Ask a question" through our storefront's page, and report an issue through the “Your Orders” page. We will respond within 24 hours

Rank No. #9

CCTREE Double-Sided PEI PEO Build Plate for Bambu Lab X1/X1C/P1P/P1S/A1 3D Printers, Textured PEI+Smooth PEO Chameleon Spring Steel Build Plate Flexible Print Bed Removable Surface Platform 257x257mm

【Double Sided PEO PEI Build Plate Design】One side is a Smooth PEO chameleon print surface. It offers a unique texture on the model’s bottom surface. the bottom of the printed model is smooth, and the model is easy to remove and clean. The other side is the PEI frosted surface plate, presenting the frosted sticker surface with a distinctive frosted touch, providing greater adherence to the model and prints without warping.
【Easy to Remove and use】The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high-quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, and then the print bed leveling will automatically go on while the machine powered on
【Good Adhesion】The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before removing the model to avoid damaging the coating
【Compatible 1.75mm Filaments】The PEI print bed surface is resistant to high temperatures of 260℃. PEO<200°C. PEO build plate surface can print PLA TPU and PETG. You'll need glue if you print other materials. PEI surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon.
【Compatible 3D Printers】Double-Sided Smooth & Textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering

Rank No. #10

CCTREE Double Side Textured PEI Sheet+Smooth PEO Chameleon Spring Steel Sheet 235 * 235mm, Flexible Print Build Plate with Magnetic Bed for Creality Ender 3/Pro/V2/Neo, Ender 5/Pro 3D Printers

【Double Sided PEO PEI Build Plate and Magnetic Bed】Both the colorful chameleon PEO and golden PEI surface feature high-adhesion textures to prevent warping, with PEO diamond also offering a unique texture on the model’s bottom surface. if you have an Ender 3 V3/V3 SE/V3 KE, remember that you will need to use your keys to remove the back stand-offs on the main plate so that this will lay flat or as flat as you can get it on those printers.
【High-temperature compatibility】PEO ≤ 120℃, recommended for printing PLA, PETG, and TPU. PEI ≤ 260℃, recommended for printing PLA, ABS, ASA, PETG, TPU, PC, PA, etc. Magnetic base ≤ 110℃.
【Precise Size】Bed sheet dimensions: 235mmx235mm, perfectly fit for Creality Ender 3/ Ender 3X/Ender 3 Neo/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender-3 S1/Ender-3 S1 Pro/Ender 5/Ender 5 Pro,CR20/pro,CP-01, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, LK4 / LK4 Pro, B1, A10M/A10T printers
【Strong magnetic adhesion】The powerful magnetic stickers maintain their magnetism even at high temperatures, ensuring printing stability.
【Bend to Remove Models】The selected spring steel bed plate features high flatness and elasticity, ensuring easy model removal and resistance to deformation, even after repeated bending. No tape, glue, or shovel is needed, reducing printing anxiety

Last update on 2025-10-19 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Cctree Build Surface?

Do you get stressed out thinking about shopping for a great Cctree Build Surface? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Cctree Build Surface, which is why we have assembled a comprehensive list of the greatest Cctree Build Surface available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cctree Build Surface that you consider buying. Your questions might include the following:

Is it worth buying an Cctree Build Surface?
What benefits are there with buying an Cctree Build Surface?
What factors deserve consideration when shopping for an effective Cctree Build Surface?
Why is it crucial to invest in any Cctree Build Surface, much less the best one?
Which Cctree Build Surface are good in the current market?
Where can you find information like this about Cctree Build Surface?

We’re convinced that you likely have far more questions than just these regarding Cctree Build Surface, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Cctree Build Surface, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Cctree Build Surface. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Cctree Build Surface buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cctree Build Surface currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Cctree Build Surface has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Cctree Build Surface?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Cctree Build Surface.
Customer Ratings: Number ratings grade Cctree Build Surface objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cctree Build Surface.
Product Quality: You don’t always get what you pay for with an Cctree Build Surface, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Cctree Build Surface is should be an indication of how long it will work out for you.

We always remember that maintaining Cctree Build Surface information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Cctree Build Surface is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Cctree Build Surface of 2022 – Reviewed and Top Rated

How Do You Buy The Best Cctree Build Surface?

Related Post: