Skip to content

The Best Cisco 4742Hdc Ir Extender of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Cisco 4742Hdc Ir Extender of 2022. Check our ranking below.

2,844 Reviews Scanned

Rank No. #1
Small 38-56kHz External Universal IR Receiver Extender works with most Cable providers boxes including but not limited to - Verizon FiOS, Comcast Xfinity X1, Cox, Charter, Spectrum DVR and Cable Boxes
  • HDTV Hookup New 9.8ft Add on IR Receiver is a perfect addition, so you can hide your Cable Box and other products, so they are out of mind.
  • Smallest Size – at 21mm x 12mm this is by far the smallest less obtrusive IR Receiver.
  • Full IR Frequency range for todays technology at 38Khz and 56Khz. With a supporting distance of 40ft @38KHz and 25ft @56 KHz.
  • REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323 Works with Verizon Fios Cable boxes model QIP, CHS, IPC, VMS series except QIP6xxx and QIP2500, also works with DTA271, DTA50 etc
  • Easy to Install and Use - Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.
SaleRank No. #2
Inteset 38-56 kHz Wideband Infrared (IR) Receiver Extender Cable for Cable Boxes, DVR's & STB's. Check Compatibility.
  • WORKS ONLY w/CABLE Set Top Boxes (STB). Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.
  • 20-25 ft range from remote control to IR receiver. High Immunity to ambient light and noise
  • Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote
  • 6 ft shielded cable, 3.5 mini plated stereo plug. Tip-VCC 5V, Center-Data, Lower-Ground
  • Works with all Universal Remotes and most Cable Boxes with an active IR IN jack
Rank No. #3
IR Receiver Cable -10FT Infrared Remote Control Repeater Extender Cable with 3.5mm Jack Plug IR Emitter for HD DVR Cisco Explorer Verizon FiOS and Other STB Set Top Boxes - 2 Pack
  • ★ KIND TIPS - This 3.5mm to IR remote control extender cable is not truly universal, it has two requirements (ir frequency and input port) and it cannot work with all brands of cable box, please think twice before ordering! If our product cannot work for you, please Message us immediately for full re-fu-nd!
  • ★ GET A MORE CLEANER OUTLOOK - This IR extender allows you to hide your cable box, set-top box, receiver, amp, Roku & other IR controlled devices behind closed doors, so not boxes sitting out on the shelf or leaving cabinet doors opened when watching TV but still you can use the remote control functionally! Give your living space a more refined and streamlined look in a second!
  • ★ UNIVERSAL COMPATIBILITY - We have tested our IR repeater kits with thousands of IR devices, and the result is this ir extender can work with all IR devices with the38-56KHz frequency of 38-56KHz and has a 3.5mm IR port (need to be met at the same time), such as Charter, Cisco, Logitech, Pioneer, DirecTV, Dish Network, Marantz, Motorola, Roku, Scientific Atlanta, Sony, Spectrum, Verizon, U-Verse, Yamaha and Comcast Cable Boxes, Set-top Boxes, DVRs, Harman Kardan Soundbar, etc.
  • ★ EASY SETTING - Our ir blaster does not required power or anything else to work, just plug the 3.5mm end into the 3.5mm IR port of your cable box then stick the transmitter head (comes with adhesive) onto anywhere you want, and start to enjoy now! If your device does not have a 3.5mm IR port, please order the USB version instead of this one!
  • ★ LONG DISTANT CONTROL - 10 feet long ir emitter allows you to extend the infrared signal into 49.21ft by just simply plug in, remote control horizontally within 45 degrees, you can even remotely turn on/off TV in the living room from your bedroom, a perfect help for everyone!
Rank No. #4
Hide Your Cable Box with Our 38/56kHz IR Extender. Please Check Compatibility List
  • Works with Verizon QIP7xxx and QIP6xxx series, Explorer, Cisco, PACE, Motorola, April and DTA Set Top Boxes
  • Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
Rank No. #6
OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm
  • IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT)
  • Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers
  • Comes with adhesive backing sticks directly onto different devices
  • Overall length of Infrared Emitter Extender: 10 feet (3 meter)
  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices
Rank No. #7
4K HDMI Over CAT6/CAT7 Extender by OREI Extender RJ45 4K@30Hz Upto 130 Ft 1080P Upto 230 FT Full HD POC Transmitter & Receiver IR Loop Out (EX-230C)
  • 230 Feet HDMI Extender - It can transmit HDMI signal 4K @ 30Hz for up to 130 Feet and Full 1080P Signal upto 230 Feet with CAT6/7 LAN Cable. Recommended Shielded Cable for best signal quality. Perfect for home/office for PC, Game Consoles, Blu Ray Players/Media Players, Sky HD box, satellite box, Android box.
  • HDMI Extender With Power Over Cable Power Supply: Adopt POC technology, power over cable, only one power adapter is needed to connect to the TX terminal can support the entire device's operation, more simple and convenient. No driver required, just plug and play.
  • Local Loop Out - Lets you connect one display at the transmitter end and you will also get one display at the receiver end. Apply M-Jpeg technique to process image compressing, and with little image quality loss. We recommend high quality shielded CAT6/7 cable for maximum picture quality. Can be used for any purpose at home, office, gyms, bars, restaurants, digital signage, churches, classrooms, meeting rooms, meeting room projectors.
  • Zero Loss - Support HDMI 480i 60HZ, 480p 60HZ, 576i 60HZ, 576 50HZ, 720p 50/60HZ, 1080i 50/60HZ, 1080P 50/60HZ; 4K@30Hz; EDID Management - It supports EDID Copy function (you can choose local or remote EDID). Audio Formats upto PCM7.1, Dolby True HD, DTS HD.
  • Includes: 1x HDMI Transmitter, 1x HDMI Receiver, 1x Power Supply Adaptor, 1x IR Blaster Cable, 1x IR Receiver Cable,1x Product Manual. Warranty: 1 Year Manufacture's Warranty. This unit requires only one power adapter to work
Rank No. #8
BAFX Products - All-in-One Infrared IR Repeater Kit/Remote Control Extender Cable / 1, 2 or 4 Device Contro (1 Device)
  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for.
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
  • RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
  • EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!
SaleRank No. #9
Inteset 38 kHz Infrared Receiver Extender Cable for HD DVR's & STB's- Check Compatibility
  • PLEASE CHECK with your cable company to be sure you have an active 3.5 mini input port labeled "IR IN" on your cable box. . Contact us if you have any questions about compatibility before you buy. WORKS ONLY w/CABLE Set Top Boxes (STB).
  • 25 ft range from remote control to IR receiver. High Immunity to ambient light and noise. If it only works a short distance away then it is not compatible and should not be used.
  • Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote. Works only with certain devices. Be sure to check wit us if you have any questions.
  • 6 ft shielded cable, 3.5 mini plated stereo plug.
  • Works with all Universal Remotes and many cable boxes with an IR IN jack. Be sure to see all of the exceptions listed below.
Rank No. #10
IR Receiver Extender Mini Infrared Emitter Remote Control Extension Cable with 3.5mm Plug for 38-56kHz Xfinity, Spectrum, Comcast, Fios, Denon, Verizon, Motorola, Explorer, Arris (Single Heads, 10FT)
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!
  • Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!
  • Sticks directly onto the AV equipment; Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device.
  • Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers.
  • The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending.

Last update on 2022-09-06 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Cisco 4742Hdc Ir Extender?

Do you get stressed out thinking about shopping for a great Cisco 4742Hdc Ir Extender? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Cisco 4742Hdc Ir Extender, which is why we have assembled a comprehensive list of the greatest Cisco 4742Hdc Ir Extender available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cisco 4742Hdc Ir Extender that you consider buying. Your questions might include the following:

  • Is it worth buying an Cisco 4742Hdc Ir Extender?
  • What benefits are there with buying an Cisco 4742Hdc Ir Extender?
  • What factors deserve consideration when shopping for an effective Cisco 4742Hdc Ir Extender?
  • Why is it crucial to invest in any Cisco 4742Hdc Ir Extender, much less the best one?
  • Which Cisco 4742Hdc Ir Extender are good in the current market?
  • Where can you find information like this about Cisco 4742Hdc Ir Extender?

We’re convinced that you likely have far more questions than just these regarding Cisco 4742Hdc Ir Extender, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Cisco 4742Hdc Ir Extender, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Cisco 4742Hdc Ir Extender. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Cisco 4742Hdc Ir Extender buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cisco 4742Hdc Ir Extender currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Cisco 4742Hdc Ir Extender has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Cisco 4742Hdc Ir Extender?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Cisco 4742Hdc Ir Extender.
  5. Customer Ratings: Number ratings grade Cisco 4742Hdc Ir Extender objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cisco 4742Hdc Ir Extender.
  7. Product Quality: You don’t always get what you pay for with an Cisco 4742Hdc Ir Extender, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Cisco 4742Hdc Ir Extender is should be an indication of how long it will work out for you.

We always remember that maintaining Cisco 4742Hdc Ir Extender information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Cisco 4742Hdc Ir Extender is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: