The Best Dashboard Cup Holders of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Dashboard Cup Holders of 2022. Check our ranking below.

2,189 Reviews Scanned

SaleRank No. #1

AZXYI Very High Bond Sticky Adhesive, 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount

【6Pcs Clear Adhesives Replacement】AZXYI offers 6 Pcs round clear sticky adhesive pads(Diameter: 80mm,3.15") for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
【Easy to Install】Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
【Very High Bond & Easy to Remove】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

SaleRank No. #2

Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm (3.15") VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders

1.[ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need.
2.[ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too.
3.[ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also waterproof. Multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for roadster mobile phone carmount, furniture，tiles.
4.[ Easy to Use ]: This large circle 2 sides refill adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying. Just peel off the old adhesive stickly dots gel from mount and clean the the surface with alcohol pad first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use.
5.[ Package Includes ]: 4 x 3.15 inch wide (80mm diameter)3m heavy duty removable heat proof small double-stick sticky padded both side backed mat tape, 4 x alcohol pad ,1 x user guide. We provide a one-year warranty and if you need any help with our product, please feel free to contact us and we will offer you our best after-sales service. Your satisfaction is our priority.

SaleRank No. #3

OQTIQ 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, Compatible with iPhone, Samsung & Other Cellphone

Quick One-Button Release: Just press the release button on the back of the cradle, clamp arms will smoothly slide to release your device, and you can easily take off your cellphones.
Enhanced Sticky Suction Cup: Keeping the phone steady while you drive is reusable gel pads that adhere to any flat or curved portion of your dashboard, and work well in hot and cold conditions. A strong suction cup securely locks on your windshield or dashboard to keep your smartphone safe and sound while you take calls and view navigation instructions.
Perfect Flexibility: Freely adjust your habitual and comfortable viewing angles due to 360 degrees of rotating ball joint. You can adjust your phone at any angle without blocking your view. With a telescopic arm, the arm can be extended from 4.2 to 5.8 inches. It’s very convenient to adjust the distance between you and the holder.
Broad Compatibility: Perfect for phones(4-6.8inches). Compatible with iPhone 13/12/X/ Xs/ 8 plus/ 8/ 7 plus/ 7/ 6s plus, Samsung Galaxy S10/ S10e/ S9/ S8, Samsung note 4/5/6/7/8/9 Google Pixel 2XL, LG G6 etc.
Versatile: The OQTIQ car phone holder is an affordable, multi-functional car phone holder with an air vent clip and a suction cup that you can mount on your air vent, windshield, or dashboard. If you’re looking for a car mount that offers a little something extra, the Oqtiq phone holder is an ideal choice.

SaleRank No. #4

Cell Phone Holder for Car, APPS2Car Suction Cup Phone Holder Dashboard Windshield Vent, Car Truck Phone Mount with Gooseneck Long Arm, Compatible with iPhone Samsung All Cellphone, Thick Case Friendly

PHONE CASE COMPATIBLE - Designed with adjustable bottom footrest and extra-wide arm clamps, the APPS2Car car phone mount is capable to fit and support large phones, even in bulky cases up to 21.5mm thick; No need to remove the protective case off your smartphone each time you drive
ENHANCED STRONG SUCTION CUP - Upgraded with industrial-strength sticky suction cup, the handsfree car phone holder can securely grip your cellphone on the windshield or dashboard even on a rugged mountain road, or abrupt brake; Comes with an extra silicon-padded interior vent clip in the case of air vent placement
FLEXIBLE GOOSENECK ARM - The dashboard/dash phone holder for car can bend up to 9.25 inches and pivot up and down in 130 degrees left and right for viewing in either portrait or landscape mode, offering an easy way to position your smartphone to get optimum viewing angle without blocking your view of the road
UNIVERSAL COMPATIBILITY - The cell phone holder car is broadly suitable for all iPhone & andriod cell phones; A suitable choice for commercial vehicles, businesses, trucks, SUVs, boats, and schools; a good companion for Uber, Lyft drivers; Compatible with iPhone 13 13 Pro Mini 12 12 Pro 11 Pro XR XS Max X 8 7 Plus 6s Samsung S10 S10 Plus S9 S8 Note 10 9 8 Galaxy S10 S10E S9 LG Google Pixel, etc
SINGLE-HANDED OPERATION - One quick-release button on the car phone holder mount enables you to effortlessly slide cellphone in and out of the mount, ideally with one hand; Secure yourself reliable and safer driving whether you are charging, navigating, listening to music, or answering the phone calls

Rank No. #5

APPS2Car Suction Cup Phone Holder for Car with Adjustable Arm, Low Profile Dashboard Phone Mount Compact Windshield Window Dash Mobile Stand Compatible w/ All iPhone and Android Cell Phones

NOTE: PLEASE USE THE DASHBOARD PAD FOR DASHBOARD MOUNTING, AND IT NEEDS A BIG ENOUGH FLAT SURFACE TO INSTALL IT. NOT RECOMMENDED TO USE THE DASHBOARD PAD FOR WINDSHIELD MOUNTING.
FLEXIBLE & ADJUSTABLE: Flexible ball head joint & adjustable arm for your perfect viewing angle and easy operation on your cell phone. Enjoy a Hands-free road trip, spend more time at the wheel, and eyes on the road.
INGENIOUS DESIGN: A cable clip on the back of the clamp will keep your charging cable in place for easy charging next time. The one-step lever will help you install the suction cup phone mount quickly and remove it easily. Designed with rubber pads, no scratch worry.
SLEEK & THOUGHTFUL: Low profile design, it is sleek and compact, blends well into most car interiors, no dazzle. No magnets, No Sticky Metal Plates Needed, No interference with charging phone, No interference with Headphone Jack Port, No interference with Volume Buttons/Power Button.
STRONG GEL & SUCTION: Made of high-quality sticky silica gel suction cup base, stick stably to most flat surfaces, like dashboard, wall, table, windshield, window. It can be restored to its mint condition by rinsing it with warm water and allowing it to air dry.

Rank No. #6

TORRAS Adhesive Sticky Pad Mounting Disk for Car Dashboard, Suction Cup Pad for Cell Phone Holder Car Mount with 80mm Diameter-One Pack

▶ [PREMIUM STICKY PAD]: When you want a dashboard car phone mount, maybe you are worried about the suction cup of your car mount, which is not stronger, maybe you also afraid that your car dash does not accept to the suction cup of the holder. Now, with the adhesive pad, you never worry about it anymore. Everything is perfect!
▶ [ SIZE ]: The diameter: 80 mm(3.15 inches), TORRAS 2in1 car phone mount would be suitable for it very well. Also, if you have a smaller suction cup than this size, that still works perfectly.
▶[ PACKAGE ]: 1 x sticky pad.
▶[ WHAT TO NOTE ]: Please don't touch the adhesive with your finger. Select a certain place to install, then don't move again.
▶[PROTECT YOUR CAR FROM DAMAGE]: If you frequently pick up the suction cup from the dashboard, it may damage your car as the time gone, but use the sticky pad, it protects your car from damage.

SaleRank No. #7

Dasbecan Car Dashboard Cup Holder Compatible with Toyota 4 Runner 1996 1997 1998 1999 Replaces# 55620-35050

【Product Description】Car Dashboard Cup Holder
【Manufacturer Part Number】55620-35050
【Compatible With】 Toyota 4 Runner 1996 1997 1998 1999
【Install】Easy to install.Easy to clean.Perfect matched, can be used normally after installation
【Customer Service】Brand New, 1 Year Warranty, Buy with confidence! If you have any problems with the products you received, please contact us in time, we will reply within 24 hrs.

Rank No. #8

K-Kang Car Cup Holder, Car Air Vent Cup Bottle Mount, Adjustable Car Air Conditioner Vent Drink Holder, Water Bottle Holder, Drink Stand.1pcs (B1101)

Multifunction: Perfect space for you to easy reach canned drink bottles and other cup below 500 milliliter and 2.9 inch diameter. Keeps your drink warm or cool with the air condition flow.
Premium Quality: Made of new ABS materials and Cushion Reduce noise and vibration during driving.meticulous craftsmanship, strong and durable.
Easy to install: Our cup holder comes with 3pairs of vent attachments to suit the A/C vent in your vehicle. Firmly mount the cup holder on to AC vent and can be removed easily. No extra tools needed.
Adjustable design : The base handle's length can be adjusted according to the inclination of dashboard. Make sure holder can be put smoothly and firmly.
Serve you Better: If you have any doubts, queries or complain about our product, let us know and we will be happy to assist you as soon as possible.

Rank No. #9

Randconcept - 95mm 3M VHB Adhesive Dashboard Pad Mounting Disk for Suction Cup Phone Mount & Garmin GPS Suction Mount | 3.74" Wide Diameter 2 Pcs

✅ WIDE COMPATIBILITY: Adhesive mounting disk fits any suction cup style or accessories mounting within 95mm in diameter suction cup for adhering to dashboards in the market. Our sticky disc is flexible option for carmount sticky pad replacement!
✅ MOUNTING WITH SMOOTH & FLAT SURFACE: Thanks for PVC plate and 3M VBH adhesive, upper part PVC plate provides smooth and flat surface while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface!
✅NO MORE ADHESIVE SEPARATED: The bottom grey color PE foam adhesive is enhanced version comparing with white adhesive in the market. It performs well even in hot and cold weather or climates.
✅ SAFE JOURNEY: After suction cup firmly attached with our sticky pad, you can enjoy navigation with smartphone or garmin GPS devices even camera securely on dashboard. No more dropping phone holders or garmin accessories for gps during driving.
✅ 100% RISK-FREE PURCHASE: At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art adhsive disc, we take all the right steps to make sure you get the finest. We’re so confident that you’ll love our sticky pads that we offer a 100% Customer Satisfaction Warranty so that you know you’re getting exactly what you pay for!

Rank No. #10

VANMASS [2023 Upgraded] Car Dashboard Phone Holder Mount [Super Suction Cup] Compatible for iPhone 14 13 Pro Max 12 11 X Xr Xs 8 7 Plus Mini Se Universal Cell Phone Windshield Vent Handsfree Cradle

【3-IN-1 Design for Multiple Scene Use】The new car phone mount comes with a strong suction cup and a sturdy vent clip, optimized position on dashboard, windshield, air vent, desk. It's perfect to see phone GPS, control music, answer calls on the road
【3 Advanced Original Technology】1)Best airliner material was adopted for this car holder, resist -40~194°F 2)Rotary-lock suction cup provides the strongest 5X loads, up to 60LBS. 3) Tightest clamp arm by innovatively optimizing 2 controlled gears into 1
【Continuous Structure Optimization】1)360° Rotation head+270° pivoted telescopic arm, extreme flexibility provides infinite angles 2) Longer diameter suction cup, 5X stronger suction power 3)Thicker silicone keeps your phone from slip and scratch
【Humanized Details, Easy to use】1)The bottom tray wide 0.96in after hundreds of tests, easiest way to touch screen/charging 2)The release button is on the back of the car mount, the best location for one-hand operation 3) Smooth 1s picking and placing
【Luxury Present: Top-notch Configuration & Profound Package】Exquisite car phone mount (suction cup/vent clip) is fully protected in Elegant & Eco-friendly box. Certificated by the world's leading CA65 REACH ROHS. Great presents for Birthday/Holiday

Last update on 2022-08-11 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Dashboard Cup Holders?

Do you get stressed out thinking about shopping for a great Dashboard Cup Holders? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Dashboard Cup Holders, which is why we have assembled a comprehensive list of the greatest Dashboard Cup Holders available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Dashboard Cup Holders that you consider buying. Your questions might include the following:

Is it worth buying an Dashboard Cup Holders?
What benefits are there with buying an Dashboard Cup Holders?
What factors deserve consideration when shopping for an effective Dashboard Cup Holders?
Why is it crucial to invest in any Dashboard Cup Holders, much less the best one?
Which Dashboard Cup Holders are good in the current market?
Where can you find information like this about Dashboard Cup Holders?

We’re convinced that you likely have far more questions than just these regarding Dashboard Cup Holders, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Dashboard Cup Holders, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Dashboard Cup Holders. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Dashboard Cup Holders buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Dashboard Cup Holders currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Dashboard Cup Holders has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Dashboard Cup Holders?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Dashboard Cup Holders.
Customer Ratings: Number ratings grade Dashboard Cup Holders objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Dashboard Cup Holders.
Product Quality: You don’t always get what you pay for with an Dashboard Cup Holders, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Dashboard Cup Holders is should be an indication of how long it will work out for you.

We always remember that maintaining Dashboard Cup Holders information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Dashboard Cup Holders is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What are the different types of car cup holders?

A: In addition, there are cup holders for different types of vehicles. For example, one style is designed specifically for the console of a trailer-hauling cab, whereas another fits perfectly on a motorcycle. Significantly, a contemporary cup holder is adaptable to the gadgets upon which you depend.

Q: What is the gadjit cup keeper cup holder Adapter (2 PK)?

A: Gadjit CUP KEEPER Cup Holder Adapter (2 Pk) expands car cup holders that are 2.5”-3” wide to hold beverages that are 3.25″ wide like 18, 20, 21, 24 oz Hydro Flasks, 12,18,20,30 oz Yeti Tumbler, 20, 24oz Naglene Bottles, Other Coffee & Travel Mugs with BOTTOMS UP TO 3.25″ in DIAMETER (Black) . . . . In stock soon.

Q: What is the cupfone adjustable phone holder?

A: The CupFone adjustable phone holder fits virtually all known current mobile phones, including those with normal sized protective cases. Fully adjustable tilt and rotation allows you to easily see your favorite app like Navigation or Waze when on the road. Makes hands free voice commands easy to use along with hands free telephone calls.

Q: How do you use a cup holder for rental cars?

A: Just ‘click’ together the cups you need and store the others for use in rental cars, golf carts or any other cup holder! Fits virtually any cup-holder so you can take with you in your truck, utility-vehicle, lawn mower, golf cart, boat or RV.