Skip to content

The Best Esp8266 Antenna of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Esp8266 Antenna of 2022. Check our ranking below.

2,021 Reviews Scanned

Rank No. #1
D1 Mini Pro NodeMCU WiFi LUA ESP8266 ESP-12 Microcontroller w/ Antenna
  • This D1 mini pro module is a mini WIFI board based on the ESP-8266EX with an external antenna for greater transmission distances
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire support except D0
  • Built-in WiFi with external antenna and 16MB of flash memory. It can be programmed with the IDE or LUA, and supports both serial and OTA programming
  • Comes with 3 different types of header connectors to support various configurations: Female, Male, Female/Male (long female)
Rank No. #2
AITRIP 5PCS D1 Mini Pro 16MB ESP8266 ESP-8266EX CP2104 WiFi External Antenna Connector Micro USB Serial Converter IoT Development Board PWM/12C/1-Wire Compatible with Arduino
  • D1 Mini Pro is a mini WiFi board with 16MB(128M bit) flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. It offers a complete and self-contained WiFi networking solution.
  • External antenna connector;Built-in ceramic antenna
  • The ESP8266 is an all-rounder and a very popular WiFi enabled micro-controller. AITRIP D1 Mini Pro is very similar to the traditional D1 Mini. However, this latest version has been fundamentally revised; The ESP2866 D1 Mini Pro is smaller and lighter
  • New CP2104 USB-TO-UART IC
  • Same size as D1 mini, but more light,Compatible withMicroPython and NodeMCU
Rank No. #3
RedTagCanada D1 Mini PRO Development Board ESP8266 CP2104 16M Bytes External Antenna Connector ESP8266 WiFi IoT Board for WeMos, for Arduino, for NodeMcu 16M Bytes Lua WiFi Internet Development Board
  • ★ Compatible with Wemos D1 Mini Pro NodeMcu 4M bytes based on ESP8266 (Pro version with 16MB)
  • ★ 5V 1a CP2104 USB-TO-UART IC
  • ★ ESP8266,ESP-12 FBuilt-in ceramic antenna or External antenna PCB antenna
  • ★ This is a powerful IOT development board, with 16MB flash, external antenna connector and built-in ceramic antenna based on ESP-8266. Same size as D1 mini, but more light
  • ★ D1 Mini PRO development board is compatible with Arduino, MicroPython, NodeMCU. And can be programmed in the Arduino IDE
Rank No. #4
WEMOS D1 Mini Pro 16MB ESP8266 Wi-Fi, External high-gain Antenna
  • Wemos D1 Mini Pro 16MB Module with External Antenna
  • Compatible with Arduino, Lua and NodeMCU
Rank No. #5
2 Sets Assembled ESP32 V2 WiFi+BT Lora Kit 0.96inch OLED Display ESP-32S CP2102 Development Board Lora SX1276 915MHZ Antenna Transceiver for Arduino ESP8266 NodeMCU
  • Document : https://drive.google(dot)com/open?id=0B8DSGdAr8_31d19WQmN6SE1fLVE
  • https://github(dot)com/HelTecAutomation/Heltec_ESP32/tree/master/examples/LoRa
  • Compatible: for Arduino Smart Home
  • Main chip: espressif esp32 and SX1276
  • Application:Internet of Things(IoT),Smart home,Machina-to-machine communication
Rank No. #6
Alinan 4pcs D1 Mini PRO 16MB Development Board ESP8266 CP2104 WiFi Development Board External Antenna Connector NodeMCU Based esp8266 Series Antenna for NodeMcu 16M Bytes Lua WiFi Internet
  • 【Amazing Little Boards, Endless Possibilities】: Based on ESP8266 ESP-8266EX CP2104; Compatible with Wemos D1 Mini Pro NodeMcu 4M bytes based on ESP8266 (Pro version with 16MB), Alinan Mini ESP8266 Board is a small, complete, and breadboard-friendly board and it is especially suitable for practical projects
  • ★The ESP8266 is an all-rounder and a very popular WiFi enabled micro-controller, with 16MB flash, external antenna connector and built-in ceramic antenna based on ESP-8266. Same size as D1 mini, but more light
  • ★D1 Mini Pro is a mini WiFi board with 16MB(128M bit) flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. It offers a complete and self-contained WiFi networking solution.
  • ★The D1 Mini Pro module has 11XI/O pin, 1XADC pin (input 0-3.3V), support OTA online, onboard 5V 1A switching power supply (large input 24V), and all pins support interrupt/ pwm/ I2C/ 1 wire/ 1 analogue input. It stands out for having an external antenna connector
  • 【Satisfaction Guarantee】: If you have any questions during use, please feel free to contact us and we will reply you immediately
Rank No. #7
MakerFocus ESP8266 Development Board DSTIKE W i F i Deauther Mini with 1.3inch OLED Display V2.0.5 Software Onboard and 2dB Antenna, Protecting Short, Over-Charging, Over-discharging and Temperature
  • Mini W i F i Deauther project; it installs the latest ESP8266 Deauther software. Using this software, you can perform different attacks to test WiFi networks. Please note that ESP8266 only supports 2.4GHz. For more detailed information about the software, please visit the product operation link guide below the product
  • Product use link, password reset link, lost password, get it from the product description
  • ESP8266 development board: You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board
  • LM39100 Low Voltage Low-Dropout Regulator; TP4056+PL5353A battery protection solution; Protection: short, over charging, over discharging, temperature
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation
SaleRank No. #8
4pcs for Wemos D1 Mini Pro V4.0.0 4M Bytes External Antenna Connector NodeMCU Based ESP8266 ESP-8266EX CP2104 WiFi IoT Development Board with Type-C USB Port
  • D1 mini pro 4mb external antenna connector based on esp8266 cp2104 wifi IoT development board with type-c usb port for wemos.
  • The d1 mini pro module has 11 digital input/output pins, and all pins support interrupt/ pwm/ I2C/ 1 wire/ 1 analogue input (3.2 max input). It stands out for having an external antenna connector.
  • ESP2866 d1 mini pro come with type-c usb port and I2C port, is smaller and lighter.
  • D1 mini compatible with micropython and nodemcu.
  • Package contains 4pcs d1 mini pro development board esp8266, 8pcs long female pins, 8pcs short female pins and 8pcs normal pins.
Rank No. #9
SparkFun ESP8266 Thing - Dev Board - WiFi-enabled microcontroller compatible with Arduino for Internet of Things WiFi Development On-board FTDI USB-to-Serial converter PCB trace antenna U.FL connector
  • All module pins broken out for ease of use. On-board FTDI USB-to-Serial. +19.5dBm output power in 802.11b mode
  • 802.11 b/g/n. Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network. Integrated PLLs, regulators, DCXO and power management units
  • Integrated low power 32-bit CPU could be used as application processor
  • The USB-to-serial converter means you don't need any peripheral components to program the chip. Simply plug in a micro USB cable.
Rank No. #10
DIYmall Assembled ESP32 V2 WiFi+BT Lora Kit, 0.96inch OLED Display ESP-32S CP2102 Development Board SX1276 915MHZ Antenna Transceiver for Arduino ESP8266 NodeMCU IOT
  • Document link https://drive(dot)google(dot)com/open?id=0B8DSGdAr8_31d19WQmN6SE1fLVE
  • https://github(dot)com/HelTecAutomation/Heltec_ESP32/tree/master/examples/LoRa
  • Compatible: for Arduino Smart Home
  • Main chip:espressif esp32 and sx1276
  • What you will get: 1pc esp32 lora oled development board(with welded pin header)+1pc antenna 915mhz + 1pc 2Pin plug cable

Last update on 2022-10-10 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Esp8266 Antenna?

Do you get stressed out thinking about shopping for a great Esp8266 Antenna? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Esp8266 Antenna, which is why we have assembled a comprehensive list of the greatest Esp8266 Antenna available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Esp8266 Antenna that you consider buying. Your questions might include the following:

  • Is it worth buying an Esp8266 Antenna?
  • What benefits are there with buying an Esp8266 Antenna?
  • What factors deserve consideration when shopping for an effective Esp8266 Antenna?
  • Why is it crucial to invest in any Esp8266 Antenna, much less the best one?
  • Which Esp8266 Antenna are good in the current market?
  • Where can you find information like this about Esp8266 Antenna?

We’re convinced that you likely have far more questions than just these regarding Esp8266 Antenna, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Esp8266 Antenna, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Esp8266 Antenna. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Esp8266 Antenna buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Esp8266 Antenna currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Esp8266 Antenna has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Esp8266 Antenna?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Esp8266 Antenna.
  5. Customer Ratings: Number ratings grade Esp8266 Antenna objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Esp8266 Antenna.
  7. Product Quality: You don’t always get what you pay for with an Esp8266 Antenna, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Esp8266 Antenna is should be an indication of how long it will work out for you.

We always remember that maintaining Esp8266 Antenna information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Esp8266 Antenna is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Can I add an antenna to my ESP8266?

A: You must use a WiFi (2.4 GHz) antenna. From the picture in your post, you have one of the esp8266 modules with a “built-in” antenna implemented via traces on the PCB. You cannot add an external antenna without removing the old one first, and even that will be very dodgy – you’ll likely render your esp8266 useless for any purpose.

Q: Can I use on-board antenna with the esp-201?

A: The antennas are not intended to work simultaneously. By default ESP-201 board has external antenna selected. To use on-board antenna, the jumper (0 Ohm SMD resistor) should be resoldered as shown on the following pictures. So far, so good. Unfortunately the module has very poor WiFi range with the external antenna.

Q: What is this device that looks like an ESP8266?

A: It looks like an ESP8266 but it’s not. It’s an NRF24L01 module, which is a 2.4 GHz communications module. Nevertheless, 2.4 GHz is 2.4 GHz, and this thing has antenna wires soldered onto it!

Q: Can I connect an external antenna to Ai Thinker esp32-cam module?

A: Connecting an external antenna to Ai Thinker ESP32-CAM module may greatly extend the module’s range and its digital camera picture quality. ESP32-CAM modules are based on Espressif Systems ESP32-S module which has an optional external antenna connector. But it is not enough to simply connect an external antenna.

Related Post: