The Best Filament Sensor of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Filament Sensor of 2022. Check our ranking below.

2,196 Reviews Scanned

Rank No. #1

BIGTREETECH Filament Runout Sensor Smart Filament Detector Filament Break Filament Jam Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board 1.75mm Filament

❤【Auto Filament Runout Sensor】BIGTREETECH smart filament sensor can not only detect filament runout but also filament break and filament jam. After detecting above abnormal extrusion circumstances, our smart filament detector will conduct auto pause or stop print (depend on your set-up in advance) to help save print and remove you from filament waste.
❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH.
❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament.
❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board.
❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer. If you have any problem in setting up, please feel free to contact us for help.

Rank No. #2

Official Creality Ender 3 V2 Filament Runout Sensor, Smart Filament Break Detection Detector for Ender 3, Ender 3 Pro, Ender3 Max，Ender 5 Plus with 32 Bit V4.2.2/V4.2.7 Motherboard

【High Compatible】 Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro /Ender 3 MAX/Ender 5 Plus/ CR-10S PRO/ CR-10 V2 V3 with 32 bit V4.2.2/V4.4.7. Only Ender 3 Series need to replace extruder bracket.
【Smooth filament travelling】 The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
【Precise Detection】 Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out.
【Upgraded Design】It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
【After Sales Service】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

SaleRank No. #3

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket
Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique; Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly.
Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO)

Rank No. #4

BIGTREETECH Direct SFS Smart Filament Sensor, 1.75mm PLA Filament Runout Sensor/Filament Break Detection Sensor Compatible with SKR Mini E3 V2.0, SKR Mini E3 V3.0, Octopus V1.1 Control Board

💗Premium Material: Made of more durable materials, BTT SFS smart filament sensor has a longer service life. This filament runout sensor effectively reduces friction between components, and is more responsive.
💙Ideal for Filament Detection: When BTT filament runout/ break sensor detects filament runout, and break in filament, it will automatically stops printing, so as to remind you of loading filament, and prevent jammed filament or clogged nozzles.
💚Wide Application: Featured with detection interface, SFS Smart Filament Sensor is compatible with various control boards such as, SKR MINI E3, SKR E3 DIP, SKR V1.3, MKS GEN L, and MKS GEN V1.4.
💛Fits Various Screens: BTT filament break sensor can be directly connected to the screens 2004, 12864, TFT 24 (12864 mode), and TFT 35 V3.0(12864 mode).
❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer. If you have any question in setting up, please feel free to contact us for help. we have professional after sales enginner will help you solve it .

Rank No. #5

3D Printer Break Detection Switch Filament Detecting Run-Out Pause Monitor Sensor Module 3D Printer Accessories

Use on lerdge board: the green light for the module is always on when material is available. When the material is used up, the green light goes out. The main board executes the pause command operation and waits for the personnel to replace the good material and then continues to print.
Lerdge main board wiring: M sensor port on the main board.
For other boards: material detection module uses level jump detection method.
When there is material, the level signal of the detection port should be high. When there is no material, the level signal of the material port becomes low, and the system detects one. If the high to low conversion is determined, the material is considered exhausted and the pause command is executed. After humans change the material, the printer continues to print.
Suitable for 3D printer run-out, pause detection.

Rank No. #6

Aluminum 3D Printer Parts Filament Break Module Detector Sensor Run Out Pause Monitor for Creality CR-10 V3 V2 / SV03 / CR-10S Pro V2 / CR10 Max/Ender 3 Max/Ender-6 /CR-3040 Pro (Filament Sensor)

This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
This Filament breakage sensor save your filaments when a strike occures. Its cover is made from Aluminum material, red surface treatment, looks beautiful.
Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
Original from Creality, can be used without any adjustment for Creality CR-10 V3 / SV03 / CR-10 V2/ CR-10S Pro /CR-10S Pro V2 / CR-10 Max /CR-10 Max /Ender-3 Max / Ender-6 /CR-3040 Pro /CR-5Pro 3D Printer

Rank No. #7

Creativity 3D Printer Filament Detection Sensor Module Filament Run-Out Pause Detecting Monitor for 3D Printer Lerdge Board 1.75mm Filament (Black)

★【3D Printer Accessories】Very practical filament detection sensor module, ideal accessories for 3D printer, making your printing work smooth and relieved.
★【Main Function】For checking the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out.
★【Filament Detection Module】Newly designed smart module, The main board executes the pause command operation when the filament is run out.
★【Extended Product Life】A wear-resistant copper sleeve is added to the feed port and the discharge port at the same time can effectively prolong the service life of the product.
★【After-sales Guarantee 】Each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.

Rank No. #8

CREALITY CR6 SE Filament Runout Sensor Detection Module Pause Detecting Monitor for CR-6 Max, Ender 3 S1 Pro, Ender 7,3DPrintMill, CR30, Sermoon D1 3D Printer

Independent Modularized Design, Compatible with CR-6 SE, CR-6 MAX, Ender 3 S1, Ender 3 S1 Pro, CR-10 Smart, CR30, Sermoon D1 and 3DPrintMill 3D Printer, but not stuiable for Ender 3, Ender 3 Pro / V2, CR10, CR10 S4 and S5, please know before ordering.
Smooth filament travelling: The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
Precise Detection: Blue LED indicates normal filament feed-in. Blue LED turns off when filament runs out.
It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
Size: 40x31x18mm, used for 1.75mm diameter filament.

Rank No. #9

3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board

It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.

Rank No. #10

XIAOSHI 2-Pack 1.75mm 3D Filament Detection Module Filament Run-Out Pause Detecting Monitor

Type：Material detection module / Material: Plastic
Used for 1.75mm filament sensor 3D printer /Uses the level transition detection method
Board dimension: 38 x 30 x 13mm /Number of Port: 3 Pin /Cable Length: about 100cm
This item is 3D Filament Detection Module,with material in, the detection level signal should be high, and when no material, the material port level signal goes low.
Due to the difference between different monitors, the pictures may not reflect the actual color of the item.

Last update on 2023-04-04 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Filament Sensor?

Do you get stressed out thinking about shopping for a great Filament Sensor? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Filament Sensor, which is why we have assembled a comprehensive list of the greatest Filament Sensor available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Filament Sensor that you consider buying. Your questions might include the following:

Is it worth buying an Filament Sensor?
What benefits are there with buying an Filament Sensor?
What factors deserve consideration when shopping for an effective Filament Sensor?
Why is it crucial to invest in any Filament Sensor, much less the best one?
Which Filament Sensor are good in the current market?
Where can you find information like this about Filament Sensor?

We’re convinced that you likely have far more questions than just these regarding Filament Sensor, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Filament Sensor, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Filament Sensor. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Filament Sensor buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Filament Sensor currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Filament Sensor has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Filament Sensor?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Filament Sensor.
Customer Ratings: Number ratings grade Filament Sensor objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Filament Sensor.
Product Quality: You don’t always get what you pay for with an Filament Sensor, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Filament Sensor is should be an indication of how long it will work out for you.

We always remember that maintaining Filament Sensor information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Filament Sensor is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is a filament extruder?

A: The Lyman filament extruder is a device for making 3-D printer filament suitable for use in 3-D printers like the RepRap . It is named after its developer Hugh Lyman and was the winner of the Desktop Factory Competition.

Q: What is filament current?

A: filament current. in an x-ray machine the strength of the current to the filament is varied by the use of a filament or stepdown transformer.

Q: What is filament light bulb?

A: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulb is made of tungsten . When electrical current goes through it, the filament glows.

Q: What is carbon filament lamp?

A: The carbon filament lamp was the first practical form of incandescent lamp, this material originally being favoured because of the possibility to operate it at temperatures higher than any other electrical conductor that could be produced in filamentary forms at the time.