Skip to content

The Best fireplace mantel mounting hardware of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best fireplace mantel mounting hardware of 2022. Check our ranking below.

2,970 Reviews Scanned

Rank No. #1
78-inch x 3-inch Heavy Duty Steel Hidden Mantel Hardware, Easily Install A 80-inch to 96-inch Mantel, Made in The USA
  • Hidden mantel hardware, engineered to support mantels that are 3 1/2" thick or greater, and from 7" to 14" deep. The original patented bracket
  • Made to install on masonry, sheetrock, plaster, and paneled walls
  • Supports a maximum distributed load up to 300 lbs., when installed correctly.
  • Screw holes are set 1" OC from each end and continue 4" OC down the length of the bracket. Countersunk screw holes are ³∕16" OD
  • A set screw hole can be drilled in the outside rods to screw the mantel to your hardware. You can also glue the mantel onto the hardware with silicone. Both are equally effective, glue is the easiest method.
Rank No. #2
FIRMETAL 9"x8"x2.5" Heavy Duty Shelf Bracket ,max Load 1100 LBS,Premium Alloy Metal Mantel Brackets , (Set of 2) Fireplace Mantel Brackets - Countertop Support Brackets - (9 inch x 8 inch)
  • 【dimensions】9inch x 8 inch shelf bracket, designed to support 10 inches to12 inches deep shelf. (lumber board is NOT included)
  • 【material 】 The bracket is die-cast formation from high-grade alloy metal material, which is lifetime rust free. The brackets are 100% perfect 90-degree vertical angle, no need to worry about the rebound after 90°bending .
  • 【Capacity】The Specially made alloy metal material is lighter but stronger than the others on the market. It has greater load- bearing capacity, It can hold up to1100 pounds each pair, FIRMETAL shelf brackets can support books,electric power tools ,Emergency food, etc. Using as mantel Brackets ,Heavy Duty shelf brackets (set of 2) Fireplace Mantel Brackets, countertop support!
  • 【powder coating finished & Applicable place】 Matte black coated finish ,durable and sturdiness. PICESA bracket comes with traditional matte black,It fits in perfectly in your farmhouse kitchen, garage, basement storage room, and backyard.
  • 【Complimentary hardware】Comes with G5 high strength screws and authors ,as good as your local hardware chain store. screws and anchors are for different walls. Following the steps properly, put your Pre-prepared lumber board on, you will get your perfect and stable floating shelves.
Rank No. #3
2 Pack Heavy Duty Mantel Brackets, Steel U-Shaped Beam-Style Mantel Support, Floating Shelf Fireplace Bracket, Thickness: ¼"(6mm), Max.Load 440lb(220kg), Size: 6" x 6" x 5"
  • Heavy Duty Mantel Bracket, Carbon Steel Q235B + Black Powder Coated
  • Max.Load: 440lb(220kg), suitable for beam width ≤ 5½"(140mm), fits beam thickness ≥1¾"(45mm)
  • 4 Countersunk holes on the back, 2 round holes on the front. Scew Hole diameter: Φ6.2mm
  • Thickness: ¼"(6mm), Length: 6"(153mm), Height: 6"(153mm), Width: 5"(128mm). the front lip Height: 2-5/8"(67mm)
  • Package Content: 2 Pack Heavy Duty Mantel Bracket. Screw not Included
Rank No. #4
2 Pcs Mantel Brackets Heavy Duty Black 8" x 8" x 5" Floating Shelf Fireplace Bracket Thickness 6mm Max.Load 440lb Each Carbon Steel
  • Heavy Duty Mantel Brackets carbon Steel Q235B, powder coating finished.
  • Max.Load 440lb(200kg) each, fits beam width ≤7½"(193mm), fits beam thickness >1⅞"(46mm).
  • Floating Shelf Fireplace Bracket has 6 screw holes, diameter: Φ6mm.
  • Size: Thickness: ¼"(6mm), Length: 8⅛"(205mm), Height: 8⅛"(205mm), Width: 5"(128mm), has 3⅝"(92mm) lip.
  • Package Content: 2 Pcs Heavy Duty Mantel Brackets, Weight: 6.4lb (2925g) - single net weight, 13.35lb(6055g) -2 pieces.
Rank No. #5
2Pcs Heavy Duty Steel Mantel Brackets, 7 x 6 x 2½ inches Metal Shelf Bracket Support for Fireplace, Wall Mounted Floating Triangle Holder, Hand Welded Countertop Bracket Load 330 lb, 5.9 mm Thickness
  • Made of Carbon steel Q235B, powder coating finish.
  • Height: 7 inches (178 mm) Length: 6 inches (150 mm) Width: 2½ inches (63 mm) Thickness: 5.9 mm
  • Heavy Duty Weight capacity, each pair bracket can max load 330 lb (150 kg).
  • Each bracket with 6pcs screws hole (6.5 mm Hole Diameter), suit for 1/4" screw.
  • 2 Pcs Steel floating shelf brackets, screws are not included.
SaleRank No. #6
MOUNT-IT! Motorized Fireplace TV Wall Mount | Remote Control Electric Pull Down Mantel Mounting Bracket, Up to 77 Lbs Weight Capacity, Height Adjustable, Swivel, VESA 600x400 Compatible
  • MOTORIZED FIREPLACE TV MOUNT lowers and raises above your fireplace for a sleek look and comfortable viewing height
  • UNIVERSAL VESA PATTERN of up to 600x400 mm fits all compatible TV models on the market. Adjustable to VESA 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, or 600x400mm mounting patterns.
  • HEAVY-DUTY MOTOR is capable of lifting and lowering your TV with whisper quiet smooth motion. Carrying capacity of 77 lbs (tested to 154 lbs)
  • PROGRAMMABLE REMOTE CONTROL lets you control the mount from around your room. just sit back and relax.
  • FULL MOTION: Total of 101 deg pull angle and height adjustment range of up to 21.3”. Manual adjustment of swivel angle of up to 25 degrees left or right.
Rank No. #7
MantelMount MM700 Premier Fireplace TV Mount Pull Down Bracket for 50"-90" & 25-115 lb Televisions Above Mantel
  • HUGE SALE WHILE SUPPLIES LAST: Take an Instant $120 Off the MM700 (MSRP: $599.95) While Supplies Last. Watch the Product Video in the Image Gallery to See the MM700 In Action.
  • Full Range Motion: Up to 26" Vertical Travel, 30°-60° Swivel, 9° Adjustable Tilt & 17" Off-The-Wall
  • Patented Features: Heat Sensor Handles, TV Auto-Straightening, Gas Piston Auto-Stabilization, Must-Have Features: Heavy Duty Construction (3MM Steel), Paintable Wall Covers, Soundbar Attachment, Adjustable Stops, Cable Management
  • Specs: Reaches Studs Up to 28" Apart, TV Weight: 30 to 115 lbs, TV Size: 45"-90", VESA: Up to 600mm x 600mm
  • Buy With Confidence, UL Listed. Limited Lifetime Warranty, 100% Guarantee.
Rank No. #8
Parkco Rustic Fireplace Floating Mantel Shelf - Rustic Reclaimed Barn Wood Wall Decor. Mounting Hardware Included (60" W x 5" D x 2.75" H)
  • FLOATING SHELF RUSTIC WOOD MANTEL makes an elegant centerpiece in any room, above a fireplace or as a standalone shelf.
  • MODERN FARMHOUSE fireplace mantel shelf is finished with boiled linseed oil which enhances its original look and seals the piece. Use it to display pictures, stoneware, serving pieces, treasured objects - whatever your heart desires!
  • AUTHENTIC RECLAIMED WOOD pieces may have original hand hewing, saw markings, knots, waning, mortise pockets and other distinctive characteristics. The floating shelf rustic wood mantel is handcrafted in Pennsylvania with real, salvaged wooden beams.
  • MULTIPLE SIZES available. Every wooden beam mantel is completely unique - no two are alike.
  • FIREPLACE MANTEL MOUNTING HARDWARE INCLUDED: Easily and securely attach it to the wall. Additional hardware may be needed.
Rank No. #9
RRD Steel Mantel Brackets Heavy Duty (2 Pack) Fireplace Mantel Brackets - Countertop Support Bracket - Hand Welded Steel Bracket - Mantel Bracket Rustic Farmhouse Décor (5"x8"x2.5", ¼” Natural Steel)
  • Heavy-Duty Mantel Brackets - We love combining style with function, and these sleek mantel mounting brackets are no exception. These high-quality fireplace mantel brackets provide the right support for your rustic fireplace mantle - whether it’s a heavy wood slab or timber beam - which is what these mantel bracket’s heavy duty construction is for!
  • Hand-Welded Steel - Pairing practicality with simple elegance, these hand-welded fireplace mantel brackets add a striking accent of industrial tone to your space while functioning as strong and stable support for showcasing your magnificent fireplace mantel, shelf or for countertop supports. (Wood sold separately)
  • Powder-Coated & Chip-Resistant - Our 8 inch shelf brackets have a gentle arch design & a clear powder-coated finish that resists chips, scratches, and corrosion while creating the perfect look when combined with the rustic warmth found in a wood fireplace mantel.
  • Sizing & Screws Included - Different sized wood mantels will require different sized brackets. We currently offer 3 sizes of mantel brackets rustic heavy duty: 9”x12”, 10”x12”, and 12”x16”. Our heavy duty shelf brackets include the mounting hardware for the pre-drilled holes.
  • Made in the U.S.A. Quality! These shelf brackets & supports are made in the USA from top-quality ¼” steel. Our powder-coated, arch mantel brackets for wood mantels and countertop support brackets are designed to hold 300 pounds of weight when installed properly. They provide sturdiness and durability for a lifetime.
SaleRank No. #10
Ameriwood Home Lamont Mantel Fireplace, White
  • Get a fireplace effect without all the maintenance with the Ameriwood Home Lamont Electric Fireplace. Made of laminated MDF and particleboard, the clean white finish is accented by the dark gray marble effect around the electric fireplace insert
  • Both safe and convenient, the AltraFlame infrared electric heater provides quiet, gentle, energy-efficient heat that is eco-friendly and emits no dangerous carbon monoxide or emissions; heats a room up to 400 sq. ft. and plugs into a standard 120V outlet
  • Equipped with long-lasting ultra-bright LED technology with realistic logs and flame; lighting and flame effects can be used with or without heat; Control multiple light and flame settings with the included remote or front panel touchscreen
  • The 3-tiered Fireplace features 2 bookcases with 3 shelves each on either side of the fireplace to display your book collection and memorabilia. The mantel comes with a wall anchor kit to properly secure the unit to the wall to prevent tipping injuries
  • The Mantel Fireplace ships flat to your door and 2 adults are recommended to assemble and move. Each shelf will hold up to 15 lbs. This Mantel Fireplace is not designed to support a TV. Assembled Dimensions: 44.7”H x 69.3”W x 12.6”D

Last update on 2023-01-05 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best fireplace mantel mounting hardware?

Do you get stressed out thinking about shopping for a great fireplace mantel mounting hardware? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching fireplace mantel mounting hardware, which is why we have assembled a comprehensive list of the greatest fireplace mantel mounting hardware available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for fireplace mantel mounting hardware that you consider buying. Your questions might include the following:

  • Is it worth buying an fireplace mantel mounting hardware?
  • What benefits are there with buying an fireplace mantel mounting hardware?
  • What factors deserve consideration when shopping for an effective fireplace mantel mounting hardware?
  • Why is it crucial to invest in any fireplace mantel mounting hardware, much less the best one?
  • Which fireplace mantel mounting hardware are good in the current market?
  • Where can you find information like this about fireplace mantel mounting hardware?

We’re convinced that you likely have far more questions than just these regarding fireplace mantel mounting hardware, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for fireplace mantel mounting hardware, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible fireplace mantel mounting hardware. Make sure that you are only using trustworthy and credible websites and sources.

We provide an fireplace mantel mounting hardware buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available fireplace mantel mounting hardware currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of fireplace mantel mounting hardware has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an fireplace mantel mounting hardware?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your fireplace mantel mounting hardware.
  5. Customer Ratings: Number ratings grade fireplace mantel mounting hardware objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their fireplace mantel mounting hardware.
  7. Product Quality: You don’t always get what you pay for with an fireplace mantel mounting hardware, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an fireplace mantel mounting hardware is should be an indication of how long it will work out for you.

We always remember that maintaining fireplace mantel mounting hardware information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding fireplace mantel mounting hardware is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How to build a custom fireplace mantel?

A: Spread a canvas drop cloth onto the floor in front of the fireplace. Cut three poplar boards to size to form the vertical pilasters and horizontal frieze of the fireplace mantel. Join the boards together with glue and pocket screws. Rout a rabbet into the back edges of the mantel so that it will overlap the wall tiles that surround the fireplace.

Q: How to hang a fireplace mantel?

A: Cut a “Backer Board” that is as deep as the masonry surface is thick,as thick as the mantel is high,and as long as the mantel is width. Attach the backer board to as many studs as possible with 2 lag bolts per stud from the front face of the fireplace. … Temporarily clamp the mantel to the backer board. Pre-drill the screw holes. Screw lag bolts through the backer board and into the back of the mantel. … Complete the fireplace installation,masonry,and enjoy!

Q: How high to hang mirror above fireplace mantel?

A: A general guideline for hanging mirrors is to place the center of the mirror about 60 to 62 inches from the floor. This applies to situations in which the mirror is above a piece of furniture under 30 inches tall or when it is the only item on the wall.

Q: How high should mantel shelf be above fireplace?

A: A 6-inch mantel should be 15 inches away. An 8-inch deep mantel should be 17 inches above the fire box, and a 10-inch mantel needs to be 19 inches above the fireplace.

Related Post: