The Best heat wrap for pipes of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best heat wrap for pipes of 2022. Check our ranking below.

2,641 Reviews Scanned

Rank No. #1

MAXKOSKO 6 Ft. 120 V Heat Tape for Water Pipes, Self-Regulating Heating Cable for Metal And Plastic Pipes

PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This pipe heater can keep water flowing at ambient temperatures down to -40 °F (-40 °C). It consists of an additional 3 Ft power cord Plus a heating cable varies from 2 Ft to 160 Ft long. Such as 6 Ft, refers to the length of the heating cable itself. The power cord length is additional and not included in this measurement
HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: Heat Tape for Water Pipes smartly adjust its power output and never overheat or Burn. Heat tape for Pipes can be installed with Straight-traced, Spiraled, or Overlapped
ENERGY SAVING: Self-regulating heat cable has a built-in thermostat that automatically turns on at 38 °F, heat trace cable heats only when necessary. Pipe wrap tape has a 3 ft power cord which means that the distance between the thermostat and the plug is 3 feet
EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 4-steps instruction.(If you want to test before installation, please test at a temperature under 0 °C (32 °F).Plug in the heating cable. Normally you can feel the slight warmth on the cable in a few minutes.)
FOR BOTH PLASTIC AND METAL PIPES: The heat trace for pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2 in diameter. Pipe heating cable is not perishable and will not expire

Rank No. #2

TOPDURE Trusted Heating Cable for Pipe Freeze Protection, Self-Regulating Pipe Heating Tape for Metal and Plastic Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 3Ft, 120V

[Fully Certified for Maximum Safety] Our self-regulating heating cable holds ETL certifications, meeting North America's strict safety and quality standards. Designed for top performance and reliability, the entire cable—not just the plug—is certified. The UL-certified plug adds extra protection. Plus, we provide $1 million in product liability insurance for added security. For true peace of mind, always choose a fully certified heating cable—partial certification isn't enough.
[Energy Saving Technology] The heat tape built-in thermostat automatically turns cable 37℉(3℃) on and 50℉(10℃) off. More efficient, saving you money on your utility bills. 120V, 3 watts/ft at 50 ℉. It adjusts the power output based on the temperature and allows the cable to be overlapped during installation, so you’ll never use more energy than is necessary.
[Safe and Reliable] TDSF self regulating heating cable is the perfect solution to protect pipes from freezing up to 2" diameter. TDSF Self-regulating pipe heat cables are a revolutionary new way to keep water flowing down to -40℉, including inlet pipe,drain pipe, sewer , palm tree frost protection etc.
[Easy to Install] Pre-assembled to use out of the box. Keep the cable straight-traced, spiral or overlapped on the pipe and valve, affix with a good electrical tape and insulation. The lowest installation temperature of the heating cable is 14℉. Secure the thermostat(plug end) tightly against the pipe(the coldest end of the pipe).
[Testing before installing] Uncoil the cable, plug in the cable, insert the thermostat part of the cable into an ice bucket for a few minutes. When the temperature is below 37℉, the thermostat will activate the cable to function. It usually feels warm to the touch in a few minutes. You should turn off the cable once you feel the slight warm.

Rank No. #3

Cupohus Heat Tape for Water Pipes with Thermostat 12FT, Freeze Protection Self-Regulating Heat Trace Cable for Metal, Plastic Home Pipes, Roof and RV

Plumbing Protection: Our pipe heating cable uses electricity to heat the entire length of the hose in order to keep the hose above the 59℉ (15°C) so that at -40°F (-40°C) in winter night, the water will flow smoothly through your hose as well, due to ordinary water hose may freeze water due to low temperature
Intelligent Energy-Saving: When our pipe heating cable detects that the water temperature is below 41°F (5°C) , the heating system starts to work and stops when the water temperature reaches 59℉ (15°C), so that you can avoid high electricity bills due to long continuous heating
Safety Guaranteed: Operation with 120V and an external ground fault circuit interrupter (GFCI) power outlet prevents overheating problems due to short circuits, and built-in wires are completely wrapped to avoid our pipe heat cables malfunction due to water seepage
Easy Installation: All you need to do is lay our heating tape straight or wrap it around the water pipe and secure it with the supplied fiberglass tape; and if you want to test it, please put the thermostat in ice water, plug it in, wait for a few minutes you can feel the cable heating up
Customer Service: 3-year after-sales service, we're always pay more attention on you and want to receive your feedback of using our pipe heater, and if you have any questions, please let us know at any time

Rank No. #4

HEATIT Heating Cable - CSA & ETL Approved, Prevents Pipe Freeze, Keeps Water Flowing, Energy-Efficient, Reliable Performance, Hassle-Free, Durable Heat Tape for Water Pipes HISD 6ft, 7w/ft, 120V

[CSA & ETL Certified for Superior Safety] CSA and ETL certifications are trusted safety marks in North America, ensuring compliance with strict industry standards. Our self-regulating heating cable is fully CSA and ETL certified, from end to end, guaranteeing top performance and reliability. The plug is UL certified for extra protection. Always choose a fully certified heating cable—just a plug certification isn’t enough. True safety comes with complete certification.
[For Water-Filled Pipes Only] 𝙐𝙨𝙚 𝙛𝙤𝙧 𝙬𝙖𝙩𝙚𝙧 𝙛𝙞𝙡𝙡𝙚𝙙 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 (𝙞𝙣𝙘𝙡𝙪𝙙𝙞𝙣𝙜 𝙋𝙀𝙓) 𝙤𝙧 𝙢𝙚𝙩𝙖𝙡 𝙥𝙞𝙥𝙚𝙨. 𝙉𝙤𝙩 𝙪𝙨𝙚 𝙛𝙤𝙧 𝙖𝙣𝙮𝙩𝙝𝙞𝙣𝙜 𝙚𝙡𝙨𝙚, 𝙡𝙞𝙠𝙚 𝙚𝙢𝙥𝙩𝙮 𝙬𝙖𝙩𝙚𝙧 𝙥𝙞𝙥𝙚𝙨, 𝙛𝙪𝙚𝙡 𝙡𝙞𝙣𝙚𝙨, 𝙝𝙤𝙨𝙚𝙨, 𝙜𝙪𝙩𝙩𝙚𝙧𝙨, 𝙨𝙩𝙚𝙖𝙢 𝙡𝙞𝙣𝙚𝙨 𝙖𝙣𝙙 𝙨𝙤 𝙤𝙣. Comes with a two-year limited warranty for long-term reliability. If not completely satisfied with HEATIT heating cable, please don't hesitate to contact our service at any time.
[Pre-Assembled & Easy Installation] Includes a grounded plug with an indicator light, a built-in thermostat, and clear instructions. Operates at 120V, 7W/ft, with an automatic thermostat that turns on at 37°F and off at 50°F. Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. No crossing. No spiral. No overlap itself. Only straight.
[Test Before Installation for Safety] Before installation, uncoil the cable, plug it in, and place the thermostat in an ice bucket. When the temperature drops below 37°F, the cable will activate and warm up slightly. Avoid prolonged testing to prevent overheating.
[Durable & Reliable Protection] Features 100% screen rate with aluminum foil and tinned copper braid, industrial-grade heat shrink tubing, and tough XLPE insulation. Must be installed straight (no crossing, spiraling, or overlapping). Backed by USD 2 million in product liability insurance.

Rank No. #5

HEATIT 40ft Self-Regulating Heating Cable for Pipe Freeze Protection, Pipe Heat Tape for Water Pipes, Energy-Saving, Keeps Water Flowing at -40°F, ETL Listed, 120V 3W/FT

[ETL Certified for Superior Safety] ETL certification is a trusted mark of safety and quality, recognized across North America for ensuring compliance with rigorous industry standards. Our self-regulating heating cable is fully ETL certified, from end to end, guaranteeing exceptional performance and reliability. Additionally, the plug is UL certified for added safety. For the safety please always choose a heating cable that is fully certified—because true safety comes with complete certification. Just the plug certified is not enough. The whole heating cable need to be certified.
[Pipe Freeze Protection] Pipe Heating Cable, 3 W/ft, energy-efficient design. Safeguard your pipes and reduce electricity costs. Maintains water flow in temperatures as low as -40°F (-40°C). Includes a 2 Ft power cord and heating cable options ranging from 3 Ft to 160 Ft. This product is backed by up to USD 2 million in product liability insurance, providing you with added peace of mind and security in your purchase.
[Compatible with Different Pipe Materials] Our water pipe heat cable is versatile, suitable for various pipe types. It works effectively with both metal and plastic water pipes, delivering reliable freeze protection across different materials. Whether it's copper, PVC, or stainless steel, our cable guarantees exceptional performance, ensuring your pipes remain secure and operational even in extreme weather conditions.
[High-Tech Self-regulating Heating Technology] Our water pipe heat tape features self-regulating technology, automatically adjusting heating power in response to ambient conditions, ensuring it never overheats or causes burns. This intelligent functionality optimizes energy usage, ensuring efficient and dependable pipe freeze protection.
[Efficient Integrated Thermostat] Our pipe heat trace features a built-in thermostat, activating at 38℉(3℃) and deactivating at 50℉(10℃). This intelligent system regulates power output, operating only when needed for optimal energy efficiency. Rest assured, your water pipes are protected from freezing while minimizing energy usage.

Rank No. #6

LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

2"X50' Titanium Wrap with (pack of 16) Stainless Steel(304) Locking Ties.
Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place.
High resistance to abrasions, oil spills, temperatures and vibration breakdown.
The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat.
The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance

Rank No. #7

2" Wide X 32.8 Ft Outdoor Pipe Insulation Wrap - Foam and Foil Self-Adhesive Tape for Winter Freeze Protection, Insulating Cold and Hot Water Pipes to Reduce Heat Loss (1)

Outstanding Heat Preservation Performance: Our outdoor pipe insulation wrap roll boasts a 0.2-inch thick construction of rubber and plastic cotton, offering excellent heat preservation, waterproofing, fire resistance, and weather resistance properties. It effectively retains heat during winter, safeguarding outdoor pipes from freezing. In summer, the aluminum foil insulation layer shields water pipes from high temperatures and intense sunlight, preventing freezing and moisture buildup.
Aluminum Foil Layer: The insulation wrap sleeve features an aluminum foil layer, delivering exceptional flame retardant capabilities for enhanced fire prevention. Additionally, the foil layer provides superior heat preservation and insulation, bolstering waterproofing and antifreeze effectiveness while extending the pipeline's lifespan. The aluminum foil securely adheres to the rubber and plastic cotton without shifting or detachment.

Rank No. #8

SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

Package includes one 2 inch X 50 feet Heat Wrap with (pack of 6) 12" Stainless Steel (304) Locking Zip Ties.
The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat.
High resistance to abrasions, oil spills, temperatures and vibration breakdown
The thermal heat wrap can reduce heat under hood up to 50%
Universal fitment for cars and motorcycles performance parts

Rank No. #9

FANOVO Heat Tape for Water Pipes, 6ft Pipe Heat Tape with Thermostat, Self Regulating Heat Tape Cable, Freeze Protection Heating Cable Wrap for Water Pipes, Used for Metal Plastic Pipes and Roof RV

【Pipe Protection】FANOVO pipe heater cable can effectively keep your water flowing in the cold winter night of -40°F; and effectively avoiding water leakage, property loss, and subsequent repair troubles and costs caused by frozen water pipes & plumbing system. You deserve the FANOVO water pipe heat cable
【Intelligent Design】FANOVO heating cable for water pipes designed with an intelligent temperature control function and does not heat continuously. When the water temperature is detected to be lower than 41°F (5°C), the heating system starts, and stops heating when the water temperature rises to 59°F (15°C). Besides, FANOVO self regulating heat tape adopts advanced heating technology and has powerful heating capacity
【Energy Saving】Compared with traditional metal pipe heat tapes(without temperature control), FANOVO self regulating heating tape can automatically adjust the heating power according to changes in ambient temperature. The lower the ambient temperature, the greater the heating power. Reduce the power after heating to avoid energy waste caused by continuous heating, save electricity bills, and prevent pipes from overheating or damage
【Safe & Reliable】FANOVO self regulating heat tape adopts advanced heating technology and has powerful heating capacity. Operating voltage 120V, equipped with an external ground fault circuit interrupter (GFCI) power outlet to prevent overheating due to short circuits. Built-in wires are fully wrapped to prevent water seepage and malfunctions
【Easy to Install】It's very rasy to install FANOVO heat tape for water hose pipe. You only need to choose a heating tape of the appropriate length before installation, plan the direction of the heating tape on the pipe, and then lay or wrap the heating tape on the water pipe in a straight line and fix it with the included fiberglass tape. No professional tools or complicated installation skills are required

Rank No. #10

Exhaust Heat Wrap,2”x 16 Ft, Motorcycle Fiberglass Heat Shield Tape With Stainless Ties, Black

The exhaust Header Wrap is constructed from fiberglass yarn, extremely pliable for a tight and secure wrap. Withstands 1200°F direct/2500°F intermittent heat.
Excellent thermal insulation, suitable for motorcycle protection header or automotive turbo applications for increased horsepower. And suitable insulation for gas water heater exhaust pipe and household gas pipeline.
Titanium wraps offer a very cool carbon fiber look. High resistance to abrasions, oil spills, temperatures and vibration breakdown.
Package including: 1 roll exhaust heat wrap(2" x 16ft),6 pieces stainless ties( 0.2"x12').
Usage: the exhaust tube heat wrap insulation wrapped around the exhaust tube rotating clip can be fastened with stainless ties. Please wear gloves before installation.

Last update on 2025-07-05 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best heat wrap for pipes?

Do you get stressed out thinking about shopping for a great heat wrap for pipes? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching heat wrap for pipes, which is why we have assembled a comprehensive list of the greatest heat wrap for pipes available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for heat wrap for pipes that you consider buying. Your questions might include the following:

Is it worth buying an heat wrap for pipes?
What benefits are there with buying an heat wrap for pipes?
What factors deserve consideration when shopping for an effective heat wrap for pipes?
Why is it crucial to invest in any heat wrap for pipes, much less the best one?
Which heat wrap for pipes are good in the current market?
Where can you find information like this about heat wrap for pipes?

We’re convinced that you likely have far more questions than just these regarding heat wrap for pipes, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for heat wrap for pipes, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible heat wrap for pipes. Make sure that you are only using trustworthy and credible websites and sources.

We provide an heat wrap for pipes buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available heat wrap for pipes currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of heat wrap for pipes has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an heat wrap for pipes?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your heat wrap for pipes.
Customer Ratings: Number ratings grade heat wrap for pipes objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their heat wrap for pipes.
Product Quality: You don’t always get what you pay for with an heat wrap for pipes, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an heat wrap for pipes is should be an indication of how long it will work out for you.

We always remember that maintaining heat wrap for pipes information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding heat wrap for pipes is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Why you should wrap exhaust pipes separately?

A: This exhaust has a break where another header pipe slots into, so it needs to be clipped at the connection point, and the two header pipes need to be wrapped separately, which will allow the exhaust to be removed in future without cutting the heat wrap. If your exhaust has any fixing brackets then think how you’re going to wrap around them.

Q: Can pipe insulation go over heat tape?

A: Heat tape is most effective if it is covered with pipe insulation after installation. A good choice is long tubes of foam insulation fitted over the pipes and heat tape. However, read the package directions carefully to make sure that the heat tape can be covered with insulation.

Q: Can You Wrap heat tape around PEX pipe?

A: You can use a heating strip wrapped around the pipe as long as it has no adhesive material. It is not advisable to use any type of adhesive material on PEX pipe as over time the adhesive material can interact with the PEX and leech into your water. Yes, BUT Only use self-regulating heat tape.

Q: How does heat tape for water pipes work?

A: When water pipes are exposed to cold temperatures either outdoors, underground or in a crawl space, you can protect them from freezing by wrapping them with heat tape. Heating tape is actually a cord or heat cable with encased electrical wire that when plugged in regulates the temperature around plastic or metal pipes.