The Best Honeycomb Laser Bed of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Honeycomb Laser Bed of 2022. Check our ranking below.

2,735 Reviews Scanned

Rank No. #1

400 * 400mm Honeycomb Laser Bed Honeycomb Working Table Laser Honeycomb for Laser Engraver Cutting Machine with Aluminum Plate and Engraving Materials

Product size: 400 *400 * 22 mm(15.75 * 15.75 * 0.87 inch).The working size is subject to the scale. Come With 8 PCS Honeycomb Material Pin.
✿Updated Version✿✿✔✔✔The middle part of the honeycomb panel is upgraded from the original aluminum to iron, iron is more stability, durability and rust resistance, allowing you to cut or engrave with magnets to hold the material.
After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the wood are neat and clean, Less smoke and more effective smoke exhaust, and can make the cutting work clean and tidy.
Safe metal desktop protection board: The honeycomb board is equipped with a metal desktop protection board, which can protect the desktop from laser damage.
✈✈【Extra surprise 32 pcs】✈✈✈comes with a set of engraving materials package (kraft paper x2, metal engraving card x10, hangtag x2, Honeycomb Material Pin x8).

SaleRank No. #2

OUYZGIA Honeycomb Laser Bed 300x300mm Steel Honeycomb Working Table for Laser Cutter Engraver, Honeycomb Cutting Table for Laser Cutting Engraving, with Aluminum Plate (11.8”x11.8”)

【Double Protection】: Not only does the honey comb absorb and deflect the laser and debris, it also prevents over burn. Plays a positive role in protecting cutting works. The metal aluminum plate of the same size as the honeycomb plate prevents the laser from burning the worktable when cutting.
【Better Cutting Effect】: Due to the open structure of the honeycomb grid, there is optimal air flow and smoke reduction. Fast heat dissipation. Less burn marks and cleaner cuts. This significantly improves cutting efficiency and quality. Honeycomb tables are one of the best choice for laser cutting.
【All Metal Construction】:The honeycomb table is made of metal Steel and connected with rivets, there are supporting pillars in the middle of the honeycomb, the structure is particularly stable. The surface of the product is treated with black spray paint. Fireproof and rustproof. The honeycomb grid uses steel instead of aluminum, you can hold the soft materials to cut or engrave with magnets.
【Measurements Markers】: With this new version, we have added clear measurement marks on the edge of the laser bed. The measurement markings that make it real useful for placement. Also very handy for measuring materials for cutting and engraving projects.
【Packing List】: This Kit come with 1 Metal Base, 4 Edge Cover, 8 Non-Slip Pads. The metal base for protecting your workbench. The edge cover protects the human body from scratches. The non-slip pad not only prevents the honeycomb bed from sliding, it leaves a spacing between the metal base and the honeycomb bed, designed to ventilate more smoke more easily.

Rank No. #3

300 * 300mm Honeycomb Laser Bed Honeycomb Working Table Laser Honeycomb for CO2 or Laser Engraver Cutting Machine with Aluminum Plate and Engraving Materials

Product size : 300 * 300 * 22 mm (11.8*11.8*0.87 inch). Available sizes: 250 x 250 mm.
✿Updated Version✿✿✔✔✔The middle part of the honeycomb panel is upgraded from the original aluminum to iron, iron is more stability, durability and rust resistance, allowing you to cut or engrave with magnets to hold the material.
After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the wood are neat and clean, Less smoke and more effective smoke exhaust, and can make the cutting work clean and tidy.
Safe metal desktop protection board: The honeycomb board is equipped with a metal desktop protection board, which can protect the desktop from laser damage.
✈✈【Extra surprise】✈✈✈comes with a set of engraving materials package (kraft paper x2, metal engraving card x10, hangtag x2).

SaleRank No. #4

Honeycomb Laser Bed, 440x440mm Honeycomb Working Table, 17.32 x 17.32 x 0.87 inch Laser Honeycomb for Most Laser Engravers with Aluminum Plate with Engraving Materials

【Large Size & Quick Measurement】 The size of the honeycomb plate is 17 x 17x 0.87 inches ( 440 x 440 x 22 mm ).The edges of the honeycomb laser bed have precise graduations and forms a right-angle measuring ruler, making it possible to measure cutting objects easily and quickly.
【Fast Heat Dissipation】Flat and smooth with uniform honeycomb holes design accelerates the smoke emission, so wood and other materials are not easily blackened by smoke and get better engraving results.
【Sturdy Panel】The honeycomb board is equipped with a metal desktop protection board, which can protect the desktop from laser damage.
【Wide Compatibility】The honeycomb panel set is a perfect accessory for CO2 and Diode Laser Engraver Cutting Machine, Fiber laser engraving machines, etc. It can also be compatible with other engraving machines, as long as the size is appropriate.
【Surprise Tag & Card】Comes with a set of engraving materials package (metal engraving card x10, pet tag x4).

Rank No. #5

yeshine Laser Cutting Honeycomb Working Table Panel, 15.75 x 23.62 x 0.86 inch Honeycomb Laser Bed, for CO2 or Diode Laser Engraving Cutting Machine, Honeycomb Board for Laser, Honeycomb Working Panel

【Can Be Fixed With Magnets】: Honeycomb table cutting base plate is made of all metal, honeycomb core is made of galvanized iron sheet and can be fixed by magnets. Anti-corrosion and anti-rust in high temperature cutting conditions, not easy to deformation, is your essential accessories for laser cutting and engraving.
【All-Around Protection】: Honeycomb panel with 8mm honeycomb holes, uniform holes help to exhaust smoke, and the same size metal aluminum plate as the honeycomb panel can prevent the table from burning during laser cutting, providing you with double protection.
【Product Size】: Laser cut honeycomb work table panel size is 400 x 600 x 22mm (15.75 x 23.62 x 0.86 inch), honeycomb mesh hole diameter is 8mm.Honeycomb working table board are wrapped with aluminum all around, honeycomb mesh added three layers of reinforcement design, not easy to collapse.
【Wide Compatibility】: The honeycomb work outside panel allows you to cut materials such as wood, acrylic and cardboard more easily and is compatible with various mature laser engraving machines on the market, such as diode DIY laser engraving machine, CO2 laser engraving machine and fiber laser engraving machine.
【Hassle-free after-sales service】: The laser engraving honeycomb table panel is equipped with professional technical after-sales staff, if you have any questions feel free to contact us, customer service will reply you within 24 hours.

Rank No. #6

Honeycomb Laser Bed 19.68"x 19.68"x 0.87" for xTool D1/ D1 Pro Laser Engraver with 26pcs Laser Materials and Aluminum Panel for CO2 Laser Cutter, Desktop-Protect, Heat Dissipation and Smooth Edge Cut

✅✅✅【Soulmate for laser engraver】Coolook honeycomb working table is indispensable part of laser cutting and engraving machines. It helps to extend the life of your laser engraver desktop, make your engravings more precise and improve the quality of your engravings.
✅✅✅【Durable Material & Fast Heat Dissipation】The honeycomb panel is made of steel, making it more stable, durable, and rust-proof. The flat and smooth honeycomb hole design accelerates the emission of smoke so that materials such as wood are not easily blackened by smoke, and the engraving effect is better.
✅✅✅【Multiple Protection】 In laser cutting operation, honeycomb plate is used to prevent laser reflections from damaging the laser head during the cutting process and prolong the service life of the laser. The honeycomb workbench set is equipped with an aluminum panel, which can protect your desk from laser damage. Also come with 4 corner protectors to prevent your hands from being in any potential danger.
✅✅✅【High-Efficiency Engraving & Quick Measurement】 Honeycomb panel can cut wood, acrylic, and other materials, the wood edges are neat and clean, and the 9mm aperture size can be more effectively arranged during the engraving process Smoke, helps to achieve better engraving effect. And X-axis and Y-axis are equipped with high-definition and precise scale lines to form a ruler, which is convenient for you to quickly measure the size of the engraving.
✅✅✅【Wide Compatibility】The honeycomb panel set is perfectly suitable and compatible with various mature laser engraving machines. such as diode fiber, and CO2 laser engraver machines.

Rank No. #7

JICCODA Laser Cutter Honeycomb Working Panel Set,19.7x19.7x0.87inch Honeycomb Laser Bed for CO2 or Diode Laser Engraver Cutting Machine,Honeycomb Working Table with Aluminum Plate

✬High Quality: The laser honeycomb bed is made of high quality aluminum alloy and metal materials, processed by high-precision CNC, with uniform size of honeycomb holes, durable, stable, rust-proof and high flatness.
Design Effect: Honeycomb design is conducive to smoke exhaust, so as to protect wood and other materials from smoke, improve the delicacy of the work.
✬Protective Desktop: Honeycomb panel and aluminum panel provide double protection. Keep your desktop harmless.
✬Accurate Scale Lines: Right-angle measurement scales on the X and Y axes allow easy and quick measurement of cut objects.
✬Wide Compatibility: Compatible with all kinds of laser engraving machine, as long as the size is appropriate, such as diode DIY CNC laser engraving machine and CO2 laser engraving machine.

Rank No. #8

URMAX Honeycomb Laser Bed, Laser Cutter 19.68x 19.68x 0.87 inch Honeycomb Working Panel Set for CO2 or Diode Laser Engraver Cutting Machine,Honeycomb Working Table with Aluminum Plate

[Honeycomb Design Fast Heat Dissipation] - URMAX honeycomb laser bed is a necessary accessories for laser cutter and engraving machines. After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work.
[Enhancing laser cutter the carving effect]: - Made of aluminum, URMAX laser honeycomb panel is light and will not rust. The advanced blackening treatment of honeycomb area not only resists oxidation, but also makes the honeycomb tar adherence rate low. After hundreds of scientific experiments, the 7.5mm honeycomb working table hole is the best diameter for reducing scorch marks and the fastest heat dissipation compared to 9mm. Burn marks are reduced by 80%, making your artwork more vivid.
[Universal Honeycomb Working Panel ] - Compatible with all types of laser engravers on the market and fiber, CO2 and diode laser cutter. As long as the working area of the laser cutter is not smaller than the size of our honeycomb laser bed (19.68"x 19.68"x 0.87" /500x500x22mm), it will compatible perfectly.
[Quick Measurement with Ruler] - The edges of the honeycomb laser bed have precise graduations and forms a right-angle measuring ruler, making it possible to measure cutting objects easily and quickly and more convenient
[Comprehensive Protection] - The honeycomb working table comes with an aluminum panel that can protect your desk from laser damage. We also provide four corner protectors to prevent your hands from being in any potential danger.

Rank No. #9

Comgrow Honeycomb Laser Bed 23.62x23.23x1.06 Inch,for Co2 Diode Laser Cutter and Engraver Machine, Honeycomb Working Table with Aluminum Plate,Laser Engraver Accessories, Smooth Edge Cutting

[Biggest Size Honeycomb Panel] Comgrow honeycomb working Table is 23.62x23.23x0.87 inches. The working size is 550*550mm, more than most laser engraving machine working size in the market, you can put the laser cutting machine directly on the honeycomb panel. This is to meet your needs of engraving larger items
[Fast Heat Dissipation] 8mm aperture and smooth honeycomb hole design, speed up the smoke emission, so that wood and other materials are less likely to be smoked, better engraving results
[Can Be Fixed With Magnets] The honeycomb plate is made of iron and aluminum, making it more stable and durable. In the carving process, the carving material and honeycomb board surface does not match, or poorly rated movement during the carving process will affect the carving effect, you can use Comgrow magnets to fix the material to make the engraving work more smoothly
[More Comprehensive Protection] 1. Honeycomb work bed is protected by a sturdy frame. 2. Laser Honeycomb set comes with an aluminum panel to protect your desk from laser damage.3. We also provide four corner guards to prevent your hands from being in any potential danger.4. Honeycomb panels are larger than the size of your laser engraving machine to get 100% protection
[Wide Compatibility] Honeycomb plate set is the perfect accessory for Comgrow Z1 laser engraving machine. There are two sizes for you to choose 400*400*22mm,600*590*22mm, which are compatible with various laser cutting machines, such as diode fiber, CO2 laser engraving machine.

Rank No. #10

xTool Honeycomb Working Table, Soulmate for xTool D1, D1 Pro and Most Laser Engraver, Honeycomb Working Bed for Fast Heat Dissipation and Desktop-Protecting, 19.68"x 19.68"x 0.87"

Protect Materials: Honeycomb plate and aluminum panels provide double protection. Honeycomb design facilitates smoke evacuation and protects the material from hot fumes, and you get a cleaner works
Fast Heat Dissipation: xTool honeycomb working table is made of iron and aluminum, with uniform honeycomb holes design accelerates the smoke, solving the problem of wood and other materials blackening due to smoke
Comprehensive Protection: The honeycomb working table comes with an aluminum panel that can protect your desk from laser damage. We also provide four corner protectors to prevent your hands from being in any potential danger
Large Size Honeycomb Panel: The size of the honeycomb working table is 19.68 x 19.68 x 0.87 inches ( 500 x 500 x 22 mm ). And it has precise graduation of the edges, enables laser engraving machines for wood and metal to measure objects easily
Widely Compatible: Honeycomb working Bed is perfect for xTool D1 and D1 Pro laser engraving machines. and it also compatible with other laser engraver such as dioxygen, fiber, CO2 laser engraving machine

Last update on 2023-06-16 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Honeycomb Laser Bed?

Do you get stressed out thinking about shopping for a great Honeycomb Laser Bed? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Honeycomb Laser Bed, which is why we have assembled a comprehensive list of the greatest Honeycomb Laser Bed available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Honeycomb Laser Bed that you consider buying. Your questions might include the following:

Is it worth buying an Honeycomb Laser Bed?
What benefits are there with buying an Honeycomb Laser Bed?
What factors deserve consideration when shopping for an effective Honeycomb Laser Bed?
Why is it crucial to invest in any Honeycomb Laser Bed, much less the best one?
Which Honeycomb Laser Bed are good in the current market?
Where can you find information like this about Honeycomb Laser Bed?

We’re convinced that you likely have far more questions than just these regarding Honeycomb Laser Bed, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Honeycomb Laser Bed, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Honeycomb Laser Bed. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Honeycomb Laser Bed buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Honeycomb Laser Bed currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Honeycomb Laser Bed has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Honeycomb Laser Bed?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Honeycomb Laser Bed.
Customer Ratings: Number ratings grade Honeycomb Laser Bed objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Honeycomb Laser Bed.
Product Quality: You don’t always get what you pay for with an Honeycomb Laser Bed, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Honeycomb Laser Bed is should be an indication of how long it will work out for you.

We always remember that maintaining Honeycomb Laser Bed information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Honeycomb Laser Bed is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is a honeycomb table for laser cutting?

A: CO2 lasers make use of a honeycomb table which allows you to support parts you are cutting — without cutting into the bed too much. Unfortunately they are a consumable part, so they will eventually wear out, and they aren’t that cheap. [Claptrap] came up with an excellent alternative.

Q: What is a honeycomb bed and why is it used?

A: If a designer’s artwork is very dense or a less rigid material is being cut (for example paper or fabric), a honeycomb bed is required to keep the material flat and the structure allows the heat and waste material, caused by the process to escape. The lightweight high-strength characteristics of aluminium make it ideal for this application.

Q: Why is the honeycomb used in laser engraving?

A: Because the laser will burn up the plate after time. The honeycomb reduces the area of contact and the rest of the structure is out of the focal range of the laser.

Q: How often should I replace my Honeycomb bed?

A: Aluminium Honeycomb beds are designed to be sacrificial and should be replaced on a regular basis to minimise contamination from material to material, this is a far more cost-effective solution than having to replace your laser machine bed.