Skip to content

The Best Molex Picoblade 4 Pin of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Molex Picoblade 4 Pin of 2022. Check our ranking below.

2,271 Reviews Scanned

Rank No. #1
Keszoox MX 1.25mm Male Female Connector Kit and Premium Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Flight Controller Total 240pcs MX1.25 Connectors and 200pcs 28AWG Cable
  • This Kit includes:Total 240pcs MX1.25mm connectors(Male*120;Female*120) and 200pcs 28AWG cables, Heat Shrink Tubing, Tweezers.It's easy to assemble, Extremely simple operation, No crimping tool needed, Just plug the pin to the housing, Completely furnished and easy to carry.
  • Designed for DIY: MX1.25mm 2/3/4/5/6/7/8/9/10 pin connectors,which can meet the different needs of design DIY. You can freely match in the range of 2pin to 10pin according to the actual scene, providing more DIY possibilities.
  • Premium Pre-Crimped Cables: Equipped with 200pcs 28AWG wire with length of 150mm, and both sides are crimped with MX1.25mm terminals,which have very good flexibility at low temperature. The wire contains 10 colors (red/black/yellow/white/blue/green/orange/purple/brown/gray), each with 20 wires, which provides richer materials for daily design and DIY.
  • Widely used: Flight controller like Pixhawk, APM2.5, 2.6 2.8,Runcam camera and video transmitter.Perfect to achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc.
  • Suitable fot signal and wire-to-wire applications, Compatible With Molex PicoBlade.
Rank No. #2
9 PCS 1.25mm to 2.54mm Pitch Dupont Adapter Cable Wire Compatible with Molex PicoBlade for Pixhawk Flight Controller RC Drone 2Pin to 8P
  • Includes 9 pieces of cables (2pin*1, 3pin*1, 4pin*2, 5pin*1, 6pin*2, 7pin*1, 8pin*1)
  • Compatible with Molex PicoBlade connector, and suitable for Pixhawk and APM2.x flight controller. etc.
  • You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc
  • 20cm length. Ultra soft silicone wire, still has very good flexibility at low temperature.
  • One side is 1.25mm pitch connector, the other side is 2.54mm pitch dupont connector
Rank No. #3
1.25mm Pitch Connectors and Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Silicone 15cm Wire
  • Include 1.25mm pitch connectors(2P*20pcs, 3P*20pcs, 4P*20pcs, 5P*20pcs, 6P*20pcs, 7P*10pcs, 8P*10pcs, 9P*10pcs, 10P*10pcs), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs ( 6 colors, each color 30 cables) , Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
  • You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
  • Compatible With Molex PicoBlade. Ultra soft silicone wire, still has very good flexibility at low temperature.
  • Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
  • You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc
Rank No. #4
1.25mm Male and Female Connectors Socket and Plug with Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Silicone 13cm Wire (Male and Female)
  • Include 1.25mm pitch connectors (2P, 3P, 4P, 5P, 6P male and female), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs (6 colors, each color 30 cables), Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
  • Ideal for signal and wire-to-wire applications. You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually.
  • Ultra soft silicone wire, still has very good flexibility at low temperature.
  • Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
  • You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc..
Rank No. #5
Molex Micro-Fit 3.0 dual row (4 Circuits) Male & Female receptacle plug, w/Terminal sockets, (Pack of 5 Set)
  • Molex No. of Circuits: 4, (2x2) , ( 5 Completed Set )
  • Pitch: 3MM
  • Pitch: 3MM, Flammability: 94V-0
  • Current Rate: 10A (Max)
  • Temperature Range -40°C to +105°C
Rank No. #6
WMYCONGCONG 440 PCS 2.54mm 2 3 4 5 Pin Housing and Female Pin Header Terminal Connector Kit Compatible with JST-XHP Connector(2 3 4 5 Pin)
  • 2.54mm 2 3 4 5 pin housing and female pin header terminal connector kit compatible with JST-XHP connector, ideal to build your own battery.
  • Quantity: 440pcs
  • Interface type: AC/DC
  • Material of pin header: Bronze
  • Packed in clear plastic box, convenient to install and store.
Rank No. #7
20 Sets Mini Micro Jst 2.0 Ph 4 Pin Connector Plug Male With 150mm Cable & Female
  • Note:the pitch is 2mm/0.078 inch, please check the third picture about the size.
  • Product Name:jst 2.0 ph 4pin Connector Plug With Wires
  • Material: Tinned copper wire, plastic head at each end,easy to install.
  • Package included: 20pcs 2.0 4-Pin Male Connector plug with Wire + 20 pcs Female Connector plug(have not cable)
  • WIDELY USE: widely used in electrical appliances, automobiles, robots, lighting, LED strips,toys, PCB control panel, speakers, audio, batteries, toys, household appliances, etc. Suit for batteries balance charger plug, JST PH 2.0 4-pin connectors are good partners for helicopter, air plane, boat and car controller
Rank No. #8
WOWOONE 40 pcs JST Plug Connector, 20pcs Mini Micro jst 2.0 ph 4 pin Connector Plug Male, 20 Sets Female Connector Plug with 26AWG 150mm Wires Cables, for LED Strips Lights, RC Toys, Batteries, etc.
  • ✔️Quantity: 20 x 4-pin 2.0mm female connection plugs with wire, 20 x 4-pin PH2.0 male connection plugs.
  • ✔️Insulation layer: the insulation layer of the wire is not easy to fall off, safe and reliable, easy to install, and easy to use.
  • ✔️Tinned copper wire: These connecting wires are made of tinned copper wire, which can help dissipate heat and have good electrical conductivity.
  • ✔️Widely used: widely used in electrical appliances, automobiles, robots, lighting, LED strips, toys, PCB control panels, speakers, audio, batteries, household appliances, etc. Suitable for battery balance charger plugs, for JST PH 2.0 4 pin connector is a good partner for the helicopter, quadcopter, aircraft, boat, and car controller.
  • ✔️What You Get: JST PH 2.0-4 pin male and female connector plugs with female 150mm leads x 20 pcs, welcome guide, our 6-month worry-free, and friendly customer service.
Rank No. #9
COMeap (3-Pack) LP4 Molex Male to ATX 4 pin Male Auxiliary Power Adapter Cable 9.5-inch(24cm)
  • 『Molex - ATX 4P』4 Pin molex port to plug into the ATX Power Supply, ATX 4 Pin port to plug into the motherboard;
  • 『Solution』Offering best solution to convert the old-type power supply's molex connector to ATX 4 pin male;
  • 『Compatibility』Compatible with power supplies with molex port output & motherboards with ATX 4 pin port;
  • 『Parameter』Length(including connectors): 9.5-inch(24cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Rated power: 200W, Quantity: 3pcs, Self-adhesive tape*1pcs;
  • 『Note』This cable was only designed for motherboard, not GPU(Graphics Card). It will be damaged and burned once you plug it into GPU and we won’t take any responsibility for wrongly using or installing. Please check the compatible types or contact us if you are not sure about it;
Rank No. #10
20 Set Micro JST MX 1.25 4Pins Connector Plug Socket 1.25mm Pitch Female & Male Connector PCB Socket 150mm Cable
  • NOTE: These ARE NOT Balance plugs for LiPo batteries as these are 1.25mm size.
  • Cable Length : 15cm/5.9inch.
  • Pitch: 1.25mm,it is small, please measure it before buy it.
  • Maximum Voltage: 24v DCMaximum Current: 1 Amp;Cable Gauge: 28 AWG.
  • Package include: 20 Set MX 1.25 4Pins Connector.

Last update on 2023-06-22 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Molex Picoblade 4 Pin?

Do you get stressed out thinking about shopping for a great Molex Picoblade 4 Pin? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Molex Picoblade 4 Pin, which is why we have assembled a comprehensive list of the greatest Molex Picoblade 4 Pin available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Molex Picoblade 4 Pin that you consider buying. Your questions might include the following:

  • Is it worth buying an Molex Picoblade 4 Pin?
  • What benefits are there with buying an Molex Picoblade 4 Pin?
  • What factors deserve consideration when shopping for an effective Molex Picoblade 4 Pin?
  • Why is it crucial to invest in any Molex Picoblade 4 Pin, much less the best one?
  • Which Molex Picoblade 4 Pin are good in the current market?
  • Where can you find information like this about Molex Picoblade 4 Pin?

We’re convinced that you likely have far more questions than just these regarding Molex Picoblade 4 Pin, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Molex Picoblade 4 Pin, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Molex Picoblade 4 Pin. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Molex Picoblade 4 Pin buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Molex Picoblade 4 Pin currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Molex Picoblade 4 Pin has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Molex Picoblade 4 Pin?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Molex Picoblade 4 Pin.
  5. Customer Ratings: Number ratings grade Molex Picoblade 4 Pin objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Molex Picoblade 4 Pin.
  7. Product Quality: You don’t always get what you pay for with an Molex Picoblade 4 Pin, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Molex Picoblade 4 Pin is should be an indication of how long it will work out for you.

We always remember that maintaining Molex Picoblade 4 Pin information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Molex Picoblade 4 Pin is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: