Skip to content

The Best Obd Saver of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Obd Saver of 2022. Check our ranking below.

2,505 Reviews Scanned

SaleRank No. #1
VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket
  • Compared by most of OBD metal pins in market with zinc plating, ours are gold plating. Better reliable on contact and electric transmission. Compared by most of OBD II Memory Saver (or Automotive Computer Memory Saver) in market with 3 ~ 5 ft in cable length, ours with super long 10 ft (3meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand
  • 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
  • Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo.
  • Using this simple memory saving device when replacing your car battery will help you avoid these problems. This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
  • As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. You can replace the battery.
Rank No. #2
pinflaw 2 PCS Automobile Power Upgrade Fuel Saving, OBD2 ECOOBD2 Automotive Plug and Driver Single Plate, Automotive Energy Saver Accessories, Universal for Most Cars (Green)
  • Practical Design: This car plug and driver tuning setting is the best setting that suits your car best. Even if the parameters of each car are different, additional tuning may not be needed. After driving about 200 kilometers, it will adjust to recognize your vehicle and driving habits.
  • Function: This fuel-saving tool can find out the hidden power of your car, which can help you increase 35% of power and 25% of torque, save your car consumption, improve driving experience, and help you save some unnecessary expenses.
  • Adjustment Installation and Calibration: This car plug and driver is simple to use. Remove the car key from the ignition switch. Find the connector in your car, then insert this car plug and drive to adjust. Insert the key into the ignition switch and twist the key to the first stage, press and hold the reset button for about 5 seconds. After releasing the button, just wait for about 30-54 seconds.
  • Easy to Install: This car plug and driver is simple to install and does not require a complicated operation process. It is a plug and play device that can improve the performance of the engine. When it is plugged into the connector, it receives information from the on-board computer.
  • Product List: The package contains 2 car fuel saving tools, which are enough to meet your daily needs. You can insert it directly when you need it. The packaging adopts blister and cardboard, which makes you more assured.
Rank No. #3
Tune Saver - OBDII/OBD2 Lock - BEM Auto
  • Discreetly shields and locks the OBDII port
  • EASY INSTALL - No professional installation; follow simple instruction sheet for quick on-and-off with included key
  • EASY INSTALL - No professional installation; follow simple instruction sheet for quick on-and-off with included keys
  • EASY INSTALL - No professional installation; follow simple instruction sheet for quick on-and-off with included keys
Rank No. #4
OBD car Memory Saver obdii Connector Battery Change ECU Protection Replacement 12V
  • 1.Car battery change memory works with any 12V DC power source,battery memory saver for car battery including a running starter, battery memory saver 12V DC lead-acid battery, or other automotive DC 12V power outlet. obd2 memory battery saver displays both voltage and current, car battery saver red for voltage and green for current.
  • 2.obd car memory saver Reliably clamp the battery clips onto the positive and automobile memory saver negative terminals of the spare battery (red clip connects to the positive terminal, black clip connects to the negative terminal). obd2 car memory saver 12v vehicle ecu emergency power supply cable Connect the tool's OBD connector to the vehicle's OBD connector. If the emergency start-up power supply for automobile connection is successful, the green LED will light up.
  • 3.obd ii memory protection for car saver Red light on:car memory saver Representing a good connection with the storage battery, obd2 memory saver car battery for car battery the red screen will show the current voltage of the storage battery, memory saver for car battery 9 volt the blue screen will show the current, (currently no load, 0).
  • 4. obd battery memory saver vehicle ecu emergency power supply cable Blue light on: obd ii connector memory saver connect with car OBD, the red screen will show the current integrated voltage. The blue screen will display the current generated. (Provided that the on-board loss battery is lower than the backup battery voltage).
  • 5.obd2 car memory saver Protect the vehicle, memory saver for car battery replacement when replacing the car battery, it can be used to supply power to the vehicle ECU and prevent the vehicle ECU data from being lost. High insulation, strong alligator clip bite, iron surface nickel-plated treatment, effectively play the role of anti-corrosion, anti-oxidation, resistance to insertion and extraction.
Rank No. #5
E60 OBD II Vehicle ECU Emergency Power Supply Cable 12V Car Memory Saver with 2 Alligator Clip&Battery Box
  • Designed for use during car battery replacement. When replacing the car battery, connect the alternative battery and car OBD2 port with this E60 ECU emergency power cable. To protect the car's ECU data.
  • [What are the Advantages of the E60?] Unique design that has 2 methods to get power. Get power from a 12V battery with the clip connector, or connect to the battery box (8 AA batteries are required, batteries are not included). You don't need a cigarette lighter connected to your vehicle to power it for use.
  • Power can be supplied from any 12V DC source, such as via a jump starter, a 12V lead acid battery, or a 12V DC battery from another car, etc.
  • Package includes: an emergency power cord clip, a battery box (battery not included)
  • MR CARTOOL E60 OBD2 memory saver cables are compatible with a wide range of vehicles equipped with an OBD2 port. This makes them a versatile tool for various car makes and models. Additionally, they are a cost-effective solution compared to more complex memory retention devices.
Rank No. #6
OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable
  • Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
  • Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand.
  • Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
  • Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required to change your battery. It is used to keep the memory of you radio setting and other memory computer controlled devices on the vehicle (EMCU for example.) It is used as a convenience as to not erase the memory.
  • EASY TO REPLACE :Should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery.
Rank No. #7
JEUCLEL USB Powered Vehicle OBD II Connector Memory Saver with Buzzer, Car ECU Emergency Power Supply Cable, Automotive Battery Replacement/Disconnect Tool, Save Settings During Battery Removal
  • 【Memory Saver】 Protect memory during car battery change, prevent reset settings, such as car dashboard information, digital clock, stereo, memory seats, ABS, etc.
  • 【Danger of Power Outage】 Replacing the car battery when there is no backup power supply may not only lose various memories of the car, but may also cause display abnormalities. In addition, the restoration may require readjustment at the dealer. With this tool, you don't have to worry about that.
  • 【USB Powered】 The memory protector works with USB power supply. Only a USB mobile power supply with sufficient power is needed to perfectly complete the task of replacing the battery. Compared with similar products that use alligator clips to connect to the backup power supply, it is more stable, more convenient, and greatly reduces the difficulty of operation.
  • 【Indicators and Buzzer】The new version of the memory retention period has 3 indicators and 1 buzzer, which can give warnings in many situations. Memory Saver operates in the cab, and battery replacement must be done in front of the vehicle. The buzzer will remind you when the USB power is low, so you can concentrate on your work.
  • 【Quality】 This tool is made of new PVC material, eco-friendly material, non-toxic and tasteless. High quality can be guaranteed and a longer service life can be ensured.
Rank No. #8
Lutifix OBD2 Vehicle ECU Emergency Power Supply Cable - OBD II Car Memory Saver Cable with Over-Current, Over-Voltage, Polarity Reverse Protection
  • 【Upgraded OBD2 OBD Power Cable】The OBD emergency power cable is mainly used for replacing automotive batteries and protecting automotive ECU data. LUTIFIX OBD2 Automotive Battery Replacement Tool adopts upgraded design, voltage and current display at the same time, with over-voltage protection, over-current protection and reverse polarity protection. Note:The batteries on the car can't be shared, and can't be connected to the same battery with the ECU.
  • 【Voltage and current display simultaneously】BT30 OBD emergency power supply cable Power management system with a core processor,displays battery voltage(preventing the use of depleted batteries, ensuring uninterrupted power for battery replacement),displays current (for leakage detection or understanding the car's static current when not in operation).
  • 【Over-voltage and over-current protection】OBD II Car Memory Saver Cable supports voltage and current display at the same time,over-current protection ,over-voltage protection and polarity reverse protection. The obd power cable includes a 3A quick blow fuse and power-off protection will be activated when voltage >16V.
  • 【Battery Replacement Procedures】Prepare a fully-charged spare battery and securely connect the power clamp to the positive and negative terminals of the spare battery (red clamp to positive, black clamp to negative). lf connected correctly, the screen will display voltage data. Connect the device's OBD interface to the vehicle's OBD interface.Upon successful connection, the screen will display current data. Remove the old battery from the vehicle and replace it with a new one.
  • 【Leakage detection】OBD2 Automotive Battery Replacement Tool can make a preliminary diagnosis of automotive leakage, by unplugging the fuse in the automotive fuse box and observing the current situation, to determine whether the automobile is leaking. Further diagnosis requires the use of other tools, this product can only be a preliminary diagnosis.
Rank No. #9
Schumacher Electric Automotive Memory Saver, OBD-L, for Cars, Trucks, SUVs and More, Saves Your Vehicle’s Settings During Battery Maintenance or Removal, OBDII Compatible
  • Save On-Board Data - Use the OBD-L Automotive Memory Saver to maintain your vehicle’s settings, including radio presets, seat positions, error codes, and more, while replacing or maintaining the battery
  • Easy to Use - With simple three-step instructions printed on the unit, the OBD-L is easy to operate; Plug the OBD-L into a power supply, then the vehicle’s OBDII port, and finally safely remove the battery
  • Wide Compatibility - The OBD-L is designed for compatibility with all vehicles with an OBDII port, which includes all vehicles manufactured in 1997 or later
  • Fuse Protected - The fuse in the auxiliary input plug ensures a safe and reliable connection every time
  • Complete Package – Schumacher Electric OBD-L Automotive Memory Saver and user manual

Last update on 2025-05-16 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Obd Saver?

Do you get stressed out thinking about shopping for a great Obd Saver? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Obd Saver, which is why we have assembled a comprehensive list of the greatest Obd Saver available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Obd Saver that you consider buying. Your questions might include the following:

  • Is it worth buying an Obd Saver?
  • What benefits are there with buying an Obd Saver?
  • What factors deserve consideration when shopping for an effective Obd Saver?
  • Why is it crucial to invest in any Obd Saver, much less the best one?
  • Which Obd Saver are good in the current market?
  • Where can you find information like this about Obd Saver?

We’re convinced that you likely have far more questions than just these regarding Obd Saver, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Obd Saver, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Obd Saver. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Obd Saver buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Obd Saver currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Obd Saver has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Obd Saver?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Obd Saver.
  5. Customer Ratings: Number ratings grade Obd Saver objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Obd Saver.
  7. Product Quality: You don’t always get what you pay for with an Obd Saver, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Obd Saver is should be an indication of how long it will work out for you.

We always remember that maintaining Obd Saver information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Obd Saver is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is the OBD-Saver OBD Lock made of?

A: OBD-Saver OBD II Port Lock product display OBD-Saver OBD lock for Mercedes-Benz The main body is full aluminum but the top plate is made of hardened steel to make it harder to drill out. It also has an anodized coating to weatherproof it.

Q: What is the OBD port on a car used for?

A: The OBD port can be used to disable the car’s factory alarm then program a new key to be used to steal the car. It’s pretty easy as they can gain access to the inside of the car by breaking a small section of the window and then plugging in a small device to the OBD port to reprogram the car’s computer.

Q: How do you install the OBD-saver on a Honda Accord?

A: Uninstall your factory OBD mount and socket. Then take the OBD-Saver metal mount and slide the OBD socket into it. Insert the metal mount into the original slot and screw it back in place with the original screws. Everything should be secured tight at this point.

Q: Can thieves use the OBD port to steal a car?

A: The decision to purchase is yours and using any of our links does not affect the price you pay. The unfortunate thing is that thieves can also use this port to steal the car. The OBD port can be used to disable the car’s factory alarm then program a new key to be used to steal the car.

Related Post: