The Best Obd2 To Micro Usb of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Obd2 To Micro Usb of 2022. Check our ranking below.

2,746 (random num) Reviews Scanned

Rank No. #1

GELRHONR OBD Power Cable with Switch Button, Right Angle Micro USB to OBD2 Power Cable for Dash Camera 24 Hours Surveillance/Acc Mode 12-24V to 5V 23A, for Dashcam, GPS or Radar-3.5M/11.5Ft

Application: OBD Power Cable for Dash Camera, is suitable for the ODB port and dashcam. It has two modes: One click to switch: Work on/off with the and 24hour recording.
Attention: This dashboard cam power cord OBD2 does not support new energy vehicles
Two working mode: 2 modes are toggles by a switch on the OBD port. Mode"—": Parking monitoring mode,Surveillance mode provides 24 hr power w/ low voltage protection that shuts down the device to keep it from killing the battery. Mode"O": ACC mode , at this mode your dash camera will turn On/Off when your turn On/Off
Low voltage protection: OBD2 dash cam power cable has a built-in MCU intelligent control chip, which can detect the battery power of the in real time. When the power drops to the low-voltage(11.6V) protection value of the OBD cable, the OBD line automatically enters the low-voltage protection and turns off the output!
Micro USB Plug 90°Angled "L" design: perfect for space saving and connection in narrow space. And can make for better cable management in some situations. So if your camera is quite big or the port is on the sides this will perfect for it

Rank No. #2

MEIRIYFA OBD OBD2 Power Cable for Dash Camera OBD to Micro USB Right Angle Hardwire Charger 90° Degree Wire Cord,12V-24V to 5V 3A 24 Hours Surveillance/Acc Mode with Switch Button (Micro USB)

MEIRYFA OBD OBD2 to Micro USB Power Cable for Dash Camera is widely compatible with most fuel powered vehicle recorders, GPS, radar, mobile phones, and dash cams; It is not suitable for new energy vehicles with electric and plug-in hybrid power.
The OBD2 Power Cable with ACC mode [press switch "O"]: When the car is turned on and powered on, the OBD line will automatically stop after a 20 minute delay when the car is turned off.
OBD to Micro USB for Dash Cam with constant power mode [press switch "一"]: 24-hour parking monitoring. After the car is turned off, the output ACC signal is turned off, and the positive pole continues to supply power. The recorder enters the time-lapse recording function until the car's battery level drops below 11.6V. After a 5-minute delay, the OBD line automatically stops supplying power!
Low voltage protection: The OBD cable is equipped with an MCU intelligent control chip, which can detect the battery level of the car in real time. When the car battery level drops to the low voltage protection value of the OBD line, the OBD line automatically starts the low voltage protection and turns off the output.
90 ° degree angle design: The USB plug adopts a right angle design, which is very suitable for saving space and connection in narrow spaces. Insert the hard wired cable of this OBD dash cam into the car's OBD connector and ensure that it can supply power to the dash cam, then hide any excess wires for easy installation.

Rank No. #3

XMSJSIY OBD/OBD2 to Micro USB Power Cable for Dash Camera OBDII Power Cable Adapter Charging Wire 12V-40V to 5V/3A Surveillance/ACC Mode with Switch Button-3.5M/11.5FT

The OBD to Micro USB Power Cable for Dash Camera step-down charging cable connects to the OBD/OBD2 port and connects to the Micro USB device at the other end. It provides 24-hour parking monitoring power to the Micro USB device and steadily steps down the voltage from DC12-40V to 5V/3A stable output.
Power off + 24 hours monitoring. This OBD power cable allows One cable to achieve two functions: Function one: "O" ACC mode - when the car ignition, the power cable began to output power; car off 20 minutes later, the power cable will automatically stop power supply, shut down the output. Function two: "-" normal power supply mode - 24-hour uninterrupted power supply through the power cord.
This universal OBD/OBD2 power cable contains a smart chip, when the "-" monitoring mode, lasting a long time, the battery is below 11.6V safety voltage, start low-voltage protection will automatically cut off the power, to avoid the battery power loss can not start.
Plug and play, do not destroy the original car circuit. Easy to install, you can DIY it yourself easily. (Only get power from ODB interface, no interference with other ODB data communication.)
Input port: for all vehicles with OBD port (cars, trucks, boats, ferries, etc.). Output port: designed for car recorder GPS navigator, cell phone charging, DVR, radar detector and more micro usb port devices.

SaleRank No. #4

RIIEYOCA OBD2 Hardwire for Dash Camera,90 Degree Right Angle Micro USB to OBD-II Adapter, OBD Power Cable, Two Mode with Switch Button and Play 24 Hours Surveillance/Acc Mode(11.5FT/3.5M)

The RIIEYOCA OBD 2 to Micro USB power cable provides a stable and reliable power supply for dash cams. The cable simplifies installation by eliminating the need to plug the dash cam into the ignition socket.Note！！！ This OBD power cable is only suitable for fuel vehicles, please identify carefully before purchase
There are two kinds of work for this Power Cable: Mode: ["O"]: ACC mode, when your car is turned off, the OBD power cable will also power off after 20 minutes. Mode: ["I"]: Monitor mode, when ACC is off, the OBD power cord for dash cams will continue to work until the car battery voltage is detected to be 11.6v (low voltage), and then power off after 5 minutes
Low Voltage Protection Mode ["I"]: The OBD cable for dash cams is able to monitor the car battery power in real time. When the car battery level drops to the low voltage protection value of the OBD cable, the OBD cable automatically enters the low voltage protection and shuts down the output !protects your car from battery depletion so that you have enough voltage to start the car for the next drive.NOTE:The RIIEYOCA OBD power cord is only for dashboards in the 11.6V-36V range and does not support other voltage ranges
The RIIEYOCA OBD 2 POWER CORD for dash cams 90 degree design reduces wire damage and extends the life of the power cable. Simple to install, simply plug the cable into the vehicle's OBD2 port and connect the other end to the dashboard. The cable has a Micro USB port. Please select the power cable you need
ACC Mode Input 12.8V-36V/Output: 5V/3A Monitor Mode Input 11.6V-36V/Output: 5V/3A Extension cable 3.5 meters (11.5 feet) long Note: This OBD power cable for dash cams is only suitable for fuel vehicles, please identify carefully before purchase

Rank No. #5

CERRXIAN OBD Power Cable for Dash Camera, OBD to Micro USB Adapter Hardwire Charger Cable 24 Hours Surveillance/Acc Mode with Low Voltage Protection 12-36V to 5V 3A (11.5FT) (Left Angle Micro USB)

🚗Dash cam obd power cable is suitable for all micro USB port electronic devices. Designed to provide continuous power supply 24 hours after parking for in-car devices like dash cam dvr, mirror recorder,moble phone, tablets etc.
🚗ACC mode switch/24-hour parking: "MODE O":will activate the ACC mode, only in Power supply when engine starts,power off in 10-200 seconds after the engine is turned off, the exact time varies according to the car's factory settings."MODE -": will activate the driving recorder parking mode for 24-hour monitoring.If the voltage is lower than 11.6V, the power will be cut off.
🚗Low voltage protecting obd power adapter mini usb: Built-in intelligent programmable chip that automatically detects the battery voltage and provides low voltage protection. When the battery voltage is lower than 11.6V, it will automatically cut off the power output to ensure the normal start of the vehicle.
🚗Simple plug-in installation: Plug and play without damaging the car circuit. Comes with a Auto Clip Panel Trim Installer to you can easily hide wires and cables
🚗Input:DC 11.6V-24V, Output:DC 5V/3A; Extension cable length: 3.5meter(11.5 ft). Specially designed for dash cam GPS navigator, DVR, radar detector and more mini usb port devices.Note!!!Not compatible with Volkswagen, BYD, Skoda and other cars

Rank No. #6

Tracki OBD to Micro USB Wiring Cable - Used for GPS Tracker Hook up to a car or a Truck - 12V Input - Can be Used for for dashcam, Dashboard Camera

USE IT FOR ANY DEVICE that needs Micro USB power: dashcam, GPS navigator, smartphone, tablet, dashboard camera etc.
Wire length: 7 feet (2 meters) High efficiency conversion rate from 95% to 98% when 12V input and from 88% to 90% when 24V input.
1.6A over-current protection with accurate current limiting from 0-2A
5.6V over-voltage protection from damaging devices

Rank No. #7

MEIRIYFA OBD OBD2 Power Cable for Dash Camera Mini USB/Micro USB/Type C 16Pin OBDII Step Down Hardwire Kit Charger Cable 12V 24V to 5V 2A with Switch Button Converter Cable (10.5FT)

MEIRIYFA OBD OBD2 usb power step down Cord is highly compatible, the USB hardwire kit is suitable for almost all in-car USB devices. As long as you have an OBD port, you can use it, designed for dash cams, GPS navigators, DVRs, radar detectors and more USB port devices.
OBD2 to Mini USB/Micro USB /Type C Dash Camera Power cable with Low voltage protection: the power supply connected to the battery will be protected, that is, when the input voltage is lower than 11.6V the main board will automatically cut off the power supply, and will not continue to consume the battery's power to ensure that the car can be ignited and started normally. Buck function: it can convert 12-30V voltage to 5V output voltage. The input voltage of car recorder, GPS and other electronic products is 5V.
Two working modes: One button to operate two working modes.1. ACC mode, when the car's ACC is off, the car's OBD power cord will be disconnected after 5 minutes.2. Monitor working mode, work continuously until the battery voltage is detected to be too low (11.6V), truly realize 24 hours parking monitoring.
MEIRIYFA OBD OBD2 USB power step down cable comes in a complete kit with three types of cables, mini usb, mini usb to type c port, mini usb to micro usb port, and you can switch between the 3 types of usb ports that fit your car model at will.
High quality wire, the wire body is tougher, can withstand strong pulling without breaking or deformation. Adopt pure copper wire core. Plug and play, simple and convenient, no traces to hide, does not occupy the cigarette lighter, the cigarette lighter can be used for cell phone charging, space saving.

Rank No. #8

OBD II J1962 Male 16pin obd2 to Micro USB Cable Wiring Harness Power Cable for Dash Camera Cam with Fuse 5V Output

【Power Supply】Input power : 12V-26V . Output power: 5V/2.1A. Fuse amp : 3amp . Output Connector :Micro USB
【Better PCB Board】This cable has updated chip board . Its lifetime is longer and its power supply is steadier
This cable has the switch with it . You can choose to close or open it conveniently .
【Low-Voltage Protection】this cable has a built-in intelligent programming chip which will detect the car battery voltage (12v-24v). When the car battery voltage is lower than 11.6V, the cable will stop working from wasting off the battery power .
【Longer Length】Cable length :12.5ft/3.8meters.

Rank No. #9

YANBORONSN Right Angle OBD Power Cable for Dash Camera, OBD2 to Micro USB Adapter Hardwire Charger Cable with Switch Button 24 Hours Surveillance and Acc 2 Mode 12-24 V to 5V/3A 11.5FT(RMicroR)

【Universal OBD Power Adapter】Intended to free up your cigarette lighter outlet and provide 24-hour power to your dash camera through an OBD connection, allowing your dashcam to remain working after you parked your car. NOTE: Please confirm your in-vehicle devices uses micro USB port.
【2 Work Modes】Feature 2 operational modes, selectable via a switch located on the OBD port. In "-" mode, OBD port charger cable operates in surveillance mode, offering 24/7 power until it detects low battery voltage and will power off after 5 minutes. In "O" mode, dash cam hardwire kit OBD operates in ACC mode, where OBD Port Charger Cable will power off after 20 minutes when your car ACC is off.
【Low Voltage Protection】The OBD2 dash cam power cable has a built-in MCU intelligent control chip capable of real-time battery power monitoring. Once the battery voltage drops to threshold of 11.6V or 23.2V, the OBD cable automatically activates low-voltage protection and cuts off the output.
【Clean Wiring】Unique right angle design eliminates inelegant cable bending at the end, facilitating a tidy and organized cable routing. The 22 AWG slim OBD charger cable make your carpet look wire-free and clean, prevents complicated wiring and annoying cable clutter inside your vehicle.
【Easy Installation】Simply plug our dashcam hardwire cable into your car's OBD connector, ensure it powers up your dashcam, and then tuck away any excess wire. No need to worry about battery power or mess with the fusebox with other complicated hardwire kits.

Rank No. #10

SING F LTD 1PC OBD/OBD2 to Micro USB Power Cable OBD Power Cable Adapter Charging Wire Car Charger Cable for Dash Camera GPS DVR 12V-24V to 5V/3A 3.5Meters

Designed to free up your cigarette lighter socket and supply a 24 hours continuous power to your dash camera via OBD connection, enable your dashcam to keep working on after you have parked the car.
Low Voltage Protecting: OBD2 dash cam power cable which has a built-in intelligent program control chip. (Electric vehicles are not suitable, electric vehicles voltage is not changed)Accurately detect the car battery voltage, constant12V/24V voltage to 5V. When the battery voltage is lower than 11.6V, will stops working to prevent the battery from wasting power.
Press the Red Button Switch to "Mode-": At this mode your dash cam will keep recreding 24 HOURS No Matter Your Carn or OFF. Suitable for Parking Monitor; P Resin Button Switch to "Mode o": This is ACC MODE. At this mode your dash carera will turn on/ off when your car turn on/ off.
Universal Micro USB interface,can be used for any dash cameras with USB output,also it supports to charge devices like mobile phone ,GPS Navigator,power bank with Micro USB output.
Input: DC12V-24V; Output: DC5V/3A; Extension cable length: 3.5meter (11.5ft).

Last update on 2025-03-16 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Obd2 To Micro Usb?

Do you get stressed out thinking about shopping for a great Obd2 To Micro Usb? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Obd2 To Micro Usb, which is why we have assembled a comprehensive list of the greatest Obd2 To Micro Usb available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Obd2 To Micro Usb that you consider buying. Your questions might include the following:

Is it worth buying an Obd2 To Micro Usb?
What benefits are there with buying an Obd2 To Micro Usb?
What factors deserve consideration when shopping for an effective Obd2 To Micro Usb?
Why is it crucial to invest in any Obd2 To Micro Usb, much less the best one?
Which Obd2 To Micro Usb are good in the current market?
Where can you find information like this about Obd2 To Micro Usb?

We’re convinced that you likely have far more questions than just these regarding Obd2 To Micro Usb, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Obd2 To Micro Usb, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Obd2 To Micro Usb. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Obd2 To Micro Usb buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Obd2 To Micro Usb currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Obd2 To Micro Usb has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Obd2 To Micro Usb?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Obd2 To Micro Usb.
Customer Ratings: Number ratings grade Obd2 To Micro Usb objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Obd2 To Micro Usb.
Product Quality: You don’t always get what you pay for with an Obd2 To Micro Usb, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Obd2 To Micro Usb is should be an indication of how long it will work out for you.

We always remember that maintaining Obd2 To Micro Usb information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Obd2 To Micro Usb is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What OBD2 scanner to buy?

A: NEXPEAK K1 Pro OBD2 Scanner. Nexpeak K1 Pro OBD2 scanner helps you save time and money on car key programming. … Autel MK808BT OBD2 Scanner. Autel MK808BT is an impressive auto diagnostic tool that gives you an excellent diagnosing experience. Autel MaxiIM IM508. … THINKCAR THINKTOOL PROS. … XTOOL X100 Pro 2. …

Q: What is an OBD2 Bluetooth adapter?

A: This Android-ready OBD2 Bluetooth adapter reads and reports real-time vehicle data but also reads and resets engine codes that trigger warning and check engine lights. This adapter is very inexpensive and is compatible with Android as well as Windows and Symbian operating systems, increasing its flexibility.

Q: Which OBD2 scan tool?

A: 10 Best OBD2 Scanners with ABS and SRS Review & Comparison 2022 FIXD OBD-II Scan Tool with ABS SRS – Editor’s Pick. … Bluedriver OBD2 Scanner with ABS SRS. … ANCEL AD610 Elite OBDII ABS Airbag Scanner. … FOXWELL NT630 Elite OBD2 Scanner. … Innova 3100j OBSII Scan Tool with ABS SRS. … Autel MaxiLink ML619 CAN OBD2 ABS Airbag Scanner. … Autel Diaglink ABS SRS Transmission Scanner. … Launch CRP129 OBD2 ENG/AT/ABS/SRS Scan Tool. … More items…