Skip to content

The Best Pci Express Multiplier of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Pci Express Multiplier of 2022. Check our ranking below.

2,045 Reviews Scanned

Rank No. #1
BEYIMEI PCI-E 1 to 6 Riser Card,PCI-E 1X to External 6 PCI-E USB 3.0 Adapter Multiplier Card,PCIE Riser Card for Bitcoin Mining
  • ⭐【Strong scalability】: PCI-E 1 to 6 USB multiplier card, 1 interface can be expanded to 6 PCIE ports, effectively solving the problem of lack of PCI-E interface on the motherboard.
  • ⭐【Note】: The 6 USB ports are PCI-E signals, do not plug in USB devices, otherwise the USB devices and adapter cards will be damaged.
  • ⭐【Efficient】: A cable is directly connected to the interface, effectively reducing interface interference, ensuring data reliability, and improving work efficiency!
  • ⭐【High stability】: The main control board adopts the PCI-E interface for direct power supply, no external power cord is required, so that the main control board is not interfered by the outside world and has higher stability!
  • ⭐【Compatibility】: Compatible with PCIE 4X/ 8X/ 16X. System support: Linux/ Win7/ Win8/ Win10/ Win11
SaleRank No. #2 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - Dual Port PCIe SATA III Card - 2 Int/2 Ext - SATA III 6Gbps (PEXESAT322I)
  • IMPROVE STORAGE CAPACITY: This 2-Port PCIe SATA and eSATA Controller Card enables support of two internal SATA or external (eSATA) drives through PCI Express; A cost-effective solution to increase your system's storage capacity
  • ASM1061 CONTROLLER: This SATA and eSATA controller card features a dedicated chipset to enable two switchable SATA and eSATA 6Gbps ports via a single x1 PCIe slot; Supports FIS-based Port Multiplier, Command-based switching, NCQ, and ATA/ ATAPI commands
  • WIDE COMPATIBILITY: Supports Windows and standard SATA and eSATA SSDs (solid-state drives) and HDDs (hard drives); Supports SATA III (6 Gbps) and earlier revisions; Compliant with PCI Express 2.0
  • CONVENIENT SETUP: This 2-port SATA/eSATA controller card installs in a full or low-profile PCIe slot; Compatible with PCIe x1, x4, x8, or x16 slots; Includes full-profile (pre-installed) & low-profile brackets, and 7-pin SATA cable
  • THE IT PRO'S CHOICE: Designed and built for IT professionals, this 2-Port SATA and eSATA Controller Card is backed for 2 years, including free lifetime 24/5 multi-lingual technical assistance
SaleRank No. #3
Dracaena PCI Express Multiplier Riser Card, PCIe 1 to 4 PCI-Express 16X Slots Riser Card PCI-E 1X to External 4 PCIE 1-4 Adapter Card (16X)
  • This extension is applicable to the mainboard PCI - E 1X slot, Please plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again
  • The form a complete set of wire rod is customized, never grab line to plug in.
  • When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken
  • PCI-E slot power solution, no extra power cable needed
  • Supported OS: DOS, Linux, Windows XP/7/8/10
Rank No. #4
ELUTENG PCIE 1 to 4 Ports PCI Express 16X Slots Riser Card USB 3.0 PCI-E Adapter Board Multiplier Port GPU Extender Miner Riser Card for BTC Bitcoin Miner Mining
  • 【PCI-E 1 to 4 Riser Card】The bus interface is PCI-E X1, and compatible with X4, X8, X16 graphics interface, 1 interface can be expanded to 4 USB3.0 ports, which effectively solves the problem that the lack of PCIe interface on the motherboard. NOTE: The adapter card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.
  • 【Ultra-Large Aluminum Heatsink】The ultra-large imported aluminum alloy heatsink can effectively dissipate excess heat, so that the adapter card is always at a normal temperature, and the operation is more stable.
  • 【Plug-in Design】The PCI-E riser card adopts a plug-in design, which is directly connected to the motherboard interface for power supply. It can be fixed on the chassis without an extension cable, reducing the number of adapters and patch cords, effectively reducing interface interference and line loss, and ensuring data reliability and stability, improve work efficiency.
  • 【Strong Stability】The main control board adopts the PCI-E interface for direct power supply, without an external power cord, so that the main control board is not interfered by the outside world. 4 USB 3.0 ports can work at the same time, backward compatible with USB 2.0 and USB 1.0, the stability is higher.
  • 【Wide Compatibility】The total interface supports PCIE X1 / X4 / X8 / X16 graphics card interface. The interface supports USB3.0 and is backward compatible with USB 2.0/1.0. Support DOS, LINUX, WINXP, WIN7, WIN8, WIN10 and other systems.
Rank No. #5
Ableconn PEX-SA134 4-Port eSATA III 6Gbps PCI Express Four Lanes Host Adapter Card - AHCI Port-Multiplier PCIe 2.0 x4 Controller Card
  • Supports SATA III transfer speeds up to 6.0Gbps; backward compatible with SATA I/II at 1.5/3.0Gbps
  • Built with dual ASMedia ASM1062 controllers. 6 Gbps eSATA III External PCIe Gen2 x4 Lanes High Performance Host Adapter. Supports PCIe 1.0, 2.0, and 3.0 motherboard.
  • Supports four (4) Port Multipliers and up to 20 SATA drives in total when connecting with four 5-port PMs.
  • No driver installation is required on Windows 11/10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems.
  • High quality. Fully RoHS compliant. Made in Taiwan.
Rank No. #6
2 Pack NGFF M2 to PCI-E 4X 1X Slot Riser Card, M Key M.2 2260 2280 SSD Port to PCI-e Adapter Converter Multiplier for ETH GPU BTC Mining with LED Voltage Indicator
  • Convert M.2 M Key NGFF to PCI-E X4 interface.Notice:Please make sure the power cable strand colous match each other when connecting to the prower augmentation,as to avoid faulty currents.
  • Support all Windows Systems, LINUX MAC, no drivers needed
  • Card length: 80mm or 60mm, users can remove the card top (20mm) to fit in different card slot.
  • Suitable for 2260/2280 M.2 SSD module slots. Package ships in Anti-electrostatic bags to prevent damage.
  • NOTES: the slot is closed as picture, if you want to seat a card you can cut the place where is closed, then you can seat your card as usual.
Rank No. #7
PCI-E 1 to 4 PCI Express 16X Slots Riser Card Mining Modules PCI-e 1X to External 4 PCIe Slots Adapter Pcie Port Multiplier-GOLDEN BLUE
  • The PCI-E expansion riser card adapter is designed to convert 1 PCI-E 1X slot into 4 PCI-E 16X slots. The 4 PCI-E 16X slots could connect sound card, graphics card and network card simultaneously and work in an independent non-interfering way. It is the perfect and practical solution to instantly expand PCI-E slots in crowded systems or on the motherboards with limited PCI-E ports. Features: 1-slot PCI-E 1X to 4 slots 16X riser card with high speed USB 3.0 cable.
  • imultaneously support 4 PCI-E 16X devices, non-interference. Customized for mining BTC. 2 layers PCB board design. Compliant with PCI express 2.0 & 1.1 specification. Solid capacitors supply stable power delivery. Reduced burden on the motherboard by simultaneous power supply from big 4Pin and SATA slots. Easy installation, fully plug and play, convenient and efficient.
Rank No. #8
JMT PCI-E 1x to 16x Riser Card PCI-Express 1 to 4 Slot PCIe USB3.0 Adapter Port Multiplier Miner Card for BTC Bitcoin Miner Mining (No Cable)
  • ✨Use for graphics card mining ,Function: Dedicated for bitcoin mining
  • ✨1-slot PCI-E 1X to 4 slot 16X riser card with high speed USB 3.0 cable.
  • ✨High speed USB 3.0 shield cable is flexible for 1U,2U,3U chassis.
  • ✨Support 4 port high speed PCIe 16X card.
  • ✨USB cable length:60cm/23.63" (Approx.)
Rank No. #9
BLUEXIN GPU Riser Adapter with USB 3.0 Cable,PCI-e Express 1X to 4 Port 1X Switch Multiplier HUB Riser Card for Ethereum Mining ETH
  • It consists of two parts, one main card, interface installed via PCI-E X1 on the motherboard, two equipment cards, both of which are connected together via USB 3.0 cable.
  • PCI-e Express 1x to 4 Port 1x Switch Multiplier Splitter Hub Riser Card with USB 3.0 Cable If you need more than one PCI-E x1 slot on the motherboard was not any so much, it touches you can think about it.
  • The device card also uses the PI7C9X bridge chip, for switching PCI-E, PCI-E between
  • But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place.
  • herefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better. Several Divided PCI-E 1X slot all is gen2 mode, even if gen1 previously ,it can be ok
Rank No. #10
PCIe Splitter 1 to 4 Multiplier Riser Card, PCI Express X1 Expansion Risers Card, PCIE USB 3.0 Ports Adapter Card for Ethereum Bitcoin ETH GPU Mining Miner Rig
  • ✨ 【Excellent Extendability】 Our PCIe expansion riser card is mainly to solve the problem of less interface on the motherboard, 1 port can be extended to 4. The bus interface is PCI-E X 1 that compatible with X4, X8, X16 interface graphics card .
  • ✨【Higher Stability】 ---Driver-free Design. The PCIe1 to 4 Multiplier Risers card's main control board adopts the direct power supply mode of the PCI Express interface, no more need the external power. (The motherboard must be powered off before installation)
  • ✨【Advanced Heat Dissipation 】 Motherboard IC which based on high-quality ASM1184 chipset to solve the heat dissipation problem. With aluminum alloy heat sink can effectively dissipate excess heat. Provide the stability and durability of riser card.
  • ✨ 【Port Quantity 】 The Pcie splitter 1 to 4 can make sure multiple lines work at the same time. Easy to install. (Note: This pcie splitter 1 to 4 pci riser card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.)
  • ✨【Warranty】--30-day money-back guarantee service for new product. If you have any questions about pcie splitter risers card, please feel free to contact us, we will definitely solve your problem within 12 hours.

Last update on 2023-06-10 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Pci Express Multiplier?

Do you get stressed out thinking about shopping for a great Pci Express Multiplier? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Pci Express Multiplier, which is why we have assembled a comprehensive list of the greatest Pci Express Multiplier available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Pci Express Multiplier that you consider buying. Your questions might include the following:

  • Is it worth buying an Pci Express Multiplier?
  • What benefits are there with buying an Pci Express Multiplier?
  • What factors deserve consideration when shopping for an effective Pci Express Multiplier?
  • Why is it crucial to invest in any Pci Express Multiplier, much less the best one?
  • Which Pci Express Multiplier are good in the current market?
  • Where can you find information like this about Pci Express Multiplier?

We’re convinced that you likely have far more questions than just these regarding Pci Express Multiplier, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Pci Express Multiplier, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Pci Express Multiplier. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Pci Express Multiplier buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Pci Express Multiplier currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Pci Express Multiplier has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Pci Express Multiplier?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Pci Express Multiplier.
  5. Customer Ratings: Number ratings grade Pci Express Multiplier objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Pci Express Multiplier.
  7. Product Quality: You don’t always get what you pay for with an Pci Express Multiplier, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Pci Express Multiplier is should be an indication of how long it will work out for you.

We always remember that maintaining Pci Express Multiplier information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Pci Express Multiplier is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.


Q: What is a PCI-E riser card?

A: LPE-51X is a PCI-E riser card, the computer motherboard can be a PCI-E X1 card slot at the same time convert out four PCI-E X16 card slot, four PCI-E X16 card slot can also access the sound card, Graphics cards, networks cards, etc., can work independently do not interfere with each other.

Q: How does a PCI 1184 card work?

A: The device appears to the operating system as a PCI bridge with 5 minor addresses and a label of “ASMedia Technology Inc. Device 1184”. When a card is inserted into one of the 4 slots, it appears on the same bus at the next address after this unit’s 5 addresses.

Q: Can I use this extension cable with spare PCI-E slot?

A: This product does not need to install the driver, insert the computer card slot can be used. This extension cable can be applied to the motherboard with spare PCI-E X1 Slot, Please make sure your computer is power off before your plug it in or out.

Q: Do you use PCI-E risers for cryptocurrency mining?

A: I’ve been using individual risers for a while for cryptocurrency mining, but sometimes a board will not have enough individual PCI-E slots, or worse, the x16 slots used for onboard GPUs will cover the remaining x1 or other slots, rendering those slots useless.

Related Post: