The Best Pixhawk Connectors of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Pixhawk Connectors of 2022. Check our ranking below.

2,486 Reviews Scanned

Rank No. #1

9 PCS 1.25mm to 2.54mm Pitch Dupont Adapter Cable Wire Compatible with Molex PicoBlade for Pixhawk Flight Controller RC Drone 2Pin to 8P

Includes 9 pieces of cables (2pin*1, 3pin*1, 4pin*2, 5pin*1, 6pin*2, 7pin*1, 8pin*1)
Compatible with Molex PicoBlade connector, and suitable for Pixhawk and APM2.x flight controller. etc.
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc
20cm length. Ultra soft silicone wire, still has very good flexibility at low temperature.
One side is 1.25mm pitch connector, the other side is 2.54mm pitch dupont connector

Rank No. #2

1.25mm Pitch Connectors and Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Silicone 15cm Wire

Include 1.25mm pitch connectors(2P*20pcs, 3P*20pcs, 4P*20pcs, 5P*20pcs, 6P*20pcs, 7P*10pcs, 8P*10pcs, 9P*10pcs, 10P*10pcs), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs ( 6 colors, each color 30 cables) , Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Compatible With Molex PicoBlade. Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc

Rank No. #3

Keszoox MX 1.25mm Male Female Connector Kit and Premium Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Flight Controller Total 240pcs MX1.25 Connectors and 200pcs 28AWG Cable

This Kit includes：Total 240pcs MX1.25mm connectors（Male*120；Female*120） and 200pcs 28AWG cables, Heat Shrink Tubing, Tweezers.It's easy to assemble, Extremely simple operation, No crimping tool needed, Just plug the pin to the housing, Completely furnished and easy to carry.
Designed for DIY: MX1.25mm 2/3/4/5/6/7/8/9/10 pin connectors,which can meet the different needs of design DIY. You can freely match in the range of 2pin to 10pin according to the actual scene, providing more DIY possibilities.
Premium Pre-Crimped Cables: Equipped with 200pcs 28AWG wire with length of 150mm, and both sides are crimped with MX1.25mm terminals，which have very good flexibility at low temperature. The wire contains 10 colors (red/black/yellow/white/blue/green/orange/purple/brown/gray), each with 20 wires, which provides richer materials for daily design and DIY.
Widely used: Flight controller like Pixhawk, APM2.5, 2.6 2.8,Runcam camera and video transmitter.Perfect to achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc.
Suitable fot signal and wire-to-wire applications, Compatible With Molex PicoBlade.

Rank No. #4

1.25mm Male and Female Connectors Socket and Plug with Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Silicone 13cm Wire (Male and Female)

Include 1.25mm pitch connectors (2P, 3P, 4P, 5P, 6P male and female), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs (6 colors, each color 30 cables), Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
Ideal for signal and wire-to-wire applications. You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually.
Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc..

Rank No. #5

MX1.25 Pitch Connectors and Pre-Crimped Cables Silicone 15cm Wire Compatible with Molex PicoBlade for Pixhawk

Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually.
With them you can replace or fix the broken cable in your hand.
Ultra soft silicone wire, still has very good flexibility at low temperature.
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc.

Rank No. #6

Keszoox GH 1.25mm Connector Kit and Premium Pre-Crimped Cables， for Pixhawk Flight Controller Wire Kit Pixhawk2，Total 140pcs GH1.25 Connectors and 10 Colors 200pcs 28AWG Cable 150mm Wire

【This is GH 1.25 Connector Kit】-- includes：Total 140pcs GH1.25mm connectors and 200pcs 28AWG cables, Heat Shrink Tubing, Tweezers.It's easy to assemble, Extremely simple operation, No crimping tool needed, Just plug the pin to the housing, Completely furnished and easy to carry.
【This is GH 1.25 Connector Kit】--Designed for DIY: GH1.25mm 2/3/4/5/6/7/8/9/10 pin connectors,10 different colors wires, which can meet the different needs of design DIY. You can freely match in the range of 2pin to 10pin according to the actual scene, providing more DIY possibilities.
【This is GH 1.25 Connector Kit】--Premium Pre-Crimped Cables: Equipped with 200pcs 28AWG wire with length of 150mm, and both sides are crimped with GH1.25mm terminals，which have a very good connection. The wire contains 10 colors (red/black/yellow/white/blue/green/orange/purple/brown/gray), each with 20 wires, which provides richer materials for daily design and DIY.
【This is GH 1.25 Connector Kit】--Widely used: Pixhawk Flight Controller Wire Kit. Suitable for the new version of Pixhawk2 the cube, Pixhawk4, Pixhawk4 mini, CUAV v5, Pixhack, Emlid edge, Pixracer, PXFmini, FuriousFPV F-35 Lightning, mini pix, and DJI inspire phantom flight controller.Perfect to achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc
【This is GH 1.25 Connector Kit】--What you will get more: Heat Shrink Tubing Kit(φ1mm)× 100pcs; 1pcs tweezers which can help you correct the position when you put the wire into wrong position. Any question please don't hesitate to refer to the operation video we provide.

Rank No. #7

Hobbypower Power Module Deans Plug Connector for Pixhawk PX4 APM2.8 APM2.6 Flight Control

The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time.
In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
Max input voltage: 30V
Max current sensing: 90A

Rank No. #8

DKNTZO X500 V2 Multirotor Power Module, for Holybro PM03D Power Module XT30 XT60 6S for Pixhawk4 Pixhawk 5X Pixhawk 6X for Durandal Pix32 Flight Controller X500 V2 Multirotors

PM03D provides regulated power supply as well as current consumption and battery voltage all through a 6pin 2.00mm for CLIK-Mate cable. Compatible to flight controller that uses I2C power monitor such as for Pixhawk 5X and up.
It is design for multi-rotor like the X500 V2. It has both XT-30 & XT60 connectors preinstalled for motor ESCs and Battery as well as two 5V BEC and a selectable 8V12V output different kinds of peripheral devices.
Note: This for PM is not compatible with flight controller that uses analog PM such as for Pixhawk4, Pixhawk4 Mini, pix32 v5, or Durandal flight controllers.
Plug & play no additional setup required for QGroundcontrol Mission Planner
We are responsible for every buyer, if there is any problem with the product, you can contact us at any time, we will definitely give you a satisfactory solution

Rank No. #9

elechawk Pre-Crimped Cables and GH1.25 Connectors for Pixhawk2 Pixhack Pixracer PXFmini Silicone 15cm Wire

15cm Pre-crimped GH1.25 to GH1.25 Cables * 180pcs ( 6 colors, each color 30 cables) 2P*20pcs, 3P*20pcs, 4P*20pcs, 5P*20pcs, 6P*20pcs, 7P*10pcs, 8P*10pcs, 9P*10pcs, 10P*10pcs, Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk2 the cube, Pixhawk4, Pixhawk4 mini, CUAV v5, Pixhack, Emlid edge, Pixracer, PXFmini, FuriousFPV F-35 Lightning, mini pix, and DJI inspire phantom flight controller.
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc

Rank No. #10

GH1.25 to Dupont2.54 Pre-Crimped Cables and Connectors for Pixhawk4 Pixhawk2 Pixhack Pixracer PXFmini 20cm Silicone Wire

Included 20cm Pre-crimped GH1.25 to Dupont2.54 Cables * 180pcs ( 6 colors, each color 30 cables), GH1.25 and Dupont2.54 connectors, Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Suitable for Pixhawk4, Pixhawk2 the cube, Pixhack, Pixracer, PXFmini, CUAV v5, EDGE, and Inspire, Phantom and Raspberry Pi etc. flight controller
You can achieve connection between flight controller and camera, VTX, GPS, Telemetry module, Bluetooth module, OSD, or ultrasonic sensor etc.
Ultra soft silicone wire, still has very good flexibility at low temperature.

Last update on 2023-07-04 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Pixhawk Connectors?

Do you get stressed out thinking about shopping for a great Pixhawk Connectors? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Pixhawk Connectors, which is why we have assembled a comprehensive list of the greatest Pixhawk Connectors available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Pixhawk Connectors that you consider buying. Your questions might include the following:

Is it worth buying an Pixhawk Connectors?
What benefits are there with buying an Pixhawk Connectors?
What factors deserve consideration when shopping for an effective Pixhawk Connectors?
Why is it crucial to invest in any Pixhawk Connectors, much less the best one?
Which Pixhawk Connectors are good in the current market?
Where can you find information like this about Pixhawk Connectors?

We’re convinced that you likely have far more questions than just these regarding Pixhawk Connectors, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Pixhawk Connectors, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Pixhawk Connectors. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Pixhawk Connectors buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Pixhawk Connectors currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Pixhawk Connectors has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Pixhawk Connectors?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Pixhawk Connectors.
Customer Ratings: Number ratings grade Pixhawk Connectors objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Pixhawk Connectors.
Product Quality: You don’t always get what you pay for with an Pixhawk Connectors, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Pixhawk Connectors is should be an indication of how long it will work out for you.

We always remember that maintaining Pixhawk Connectors information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Pixhawk Connectors is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What are the best connectors for Pixhawk family of flight controllers?

A: Connector for Pixhawk Family of Flight Controllers 1 Hirose DF13 2 Molex Picoblade. Most of the I2C splitters sold on Chinese sites are not DF13. 3 JST GH 4 JST SH 1.0. Used in such FC as CC3D, mini-sized Pixhawks such as Pixfalcon, Pixhawk Mini, etc. 5 Molex CLICK-Mate 6 Servo Connectors 7 Making Your Own Cable. … 8 Cable Sheath Material. …

Q: How do I connect the GPS and compass module to Pixhawk?

A: The GPS ports are connected with the six-position DF13 cable, and the MAG port is connected to the I2C port with the four-position DF13 cable. The topic 3DR UBlox GPS + Compass Module shows how to connect to Pixhawk and include additional configuration and mounting information.

Q: How do I connect Pixhawk to ArduPilot?

A: Connect to the BUZZER and SWITCH ports as shown. Mount the beeper at least 5cm away from the flight controller or the noise may upset the accelerometers. The 3DR UBlox GPS + Compass Module is the recommended GPS for Pixhawk on ArduPilot.

Q: What does the power port on the Pixhawk do?

A: The power port simultaneously powers Pixhawk and reads voltage and current analog measurements produced by an optional power module. Information about powering the Pixhawk can be found in the topic Powering the Pixhawk. For traditional single-wire-per-channel (PWM) receivers a PPM encoder can be used to convert the receiver outputs to PPM-SUM.