The Best Plasma Thc of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Plasma Thc of 2022. Check our ranking below.
2,711 (random num) Reviews Scanned
- Optoisolated output working at 5 to 24VDC or open collector
- Built-in Voltage Divider for connecting to the voltage on the torch or can use the 0- 10vdc from a voltage divider from the plasma.
- LCD Screen
- 10 to 30VDC Terminal power
- Din rail mountable
- ★ PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. ★ Non-HF--Non-HF Blowback Start, there is no HF interference.
- ★ CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
- ★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
- ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- 【Non-HF Pilot Arc Non-Touch Plasma Cutter】: GUOZHI 65NHF Plasma Cutter has Non-HF pilot arc Non-touch Plasma cutting,no interference to human body, the cutting effect is very strong and the effect is 1.5 times higher than the ordinary Cutting machine.
- 【Advanced Technology 】: This Cutter can cut normally at minus 20 degree. Maximum Cutting Thickness is 8/5", the ideal clean Cutting Thickness is 1", High cutting speed,smooth cutting section and no polish demands. This plasma cutter able to cut stainless steel, alloy steel, mild steel, copper，aluminum and other metal materials.
- 【Safety Guarantee】: GUOZHI 65 NHF Cutting machine with automatic drainage function, protect the electrode and nozzle.2T/4T/TEST function, easy to operation. This Cutter with over-heating and over-current protection functions, with excellent and reliable quality, use more safety.
- 【Set Up Within 1 Minute】: MNPT 1/4 inch industrial D-type coupler, can easily and quickly connect to the air compressor, making it more convenient and easier for the users to use, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
- 【Dual-Voltage & Accessories】: 20A-65A current adjustment, 90V-260V wide-voltage design, unafraid of the voltage fluctuations, 115V/230V dual-voltage automatic conversion. the package includes 1*65amp plasma cutter, 1*NS65 13-Feet Plasma Cutter Gun, 1*Earth Clamp(500A), 1*220V-100V Adapter, Gun Accessories and 1*User Manual.
- Rated voltage: 110/220/240V±10% 50/60HZ, Effective cutting range: 59"x98", Track rail size 84"x118"(X axis and Y axis)
- Flame cutting thickness: 0.2-7.87 inches, Flame maximum cutting speed: 23.6 inch/min
- Flame cutting optional gas supply type: Propane/acetylene/natural gas + oxygen
- Plasma cutting thickness: matching plasma source, Plasma cutting speed: matching current of plasma source(Max.138 inch/min with dry&pure gas)
- CNC controller default Max. speed limit: 78.7 inch/min, No-load default speed limit: 118 inch/min, Automatic Torch Height Control for Plasma Cutting
- ✪Blow Back Pilot Arc Plasma Cutter, This is Non-HF Blow Back Pilot Arc Plasma Cutter, Input AC220V 80A cutting current with 60% duty cycle, IGBT inverter technology, 80Amps Cutting Current, Max Cutting Thickness 30mm@80A 220V 70PSI, Clean cutting thickness 20mm@80A 220V 70PSI
- ✪Input Power AC220V±15%, the working power range from 190V to 250V, Pilot arc will not reliable if the voltage lower than 190V. 200V to 240V is best voltage range for the machine. 63A power break, 45L/min Air compressor is suggested. Machine come with 2 meters power cable with power plug NEMA14-50P. Air regulator, air gauge, air filter are installed on machine. NPT 1/4G input air connector fit at air filter at back of machine.
- ✪Multifunction Plasma Cutter, Machine with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. Machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables. Machine is not able to work while it lighting up.
- ✪Work with CNC cutting table, This plasma cutting machine with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine). This machine Easy works with CNC cutting table, Machine have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.
- ✪Metal Suitable, This CNC Plasma cutter Suitable cut 30mm standard mild steel, 25mm stainless steel, 25mm Alloy steel, 6mm copper, 10mm Aluminum. All the cutting thickness under the rate 220V 80Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure.
- Easy to disassemble rope, sturdy, sharp, wear-resistant, practical
- The lifting device of cutting machine equipment is the first product selected by peers. Our company adopts a decelerating DC motor to control the lifting body, which drives the lifting of the cutting torch. The key parts that affect the cutting accuracy of the whole machine support the NC plasma cutting positioning function.
- The internal lifting drive of the elevator adopts 304 stainless steel T-shaped lead screw. The control elevator adopts a decelerating DC motor to drive the cutting torch up and down. Both ends adopt optical axes and linear sliders to ensure stable and reliable operation in the up and down directions. Lifting transmission mechanism for flame and plasma cutting; The whole product is made of aluminum machining center with very high precision.
- The product parameters and each data are strictly controlled, and the quality is guaranteed. The built-in limit (using the reverse diode) does not bother you to wire again. The shell is black plastic sprayed, the working stroke is 100mm, the working voltage is DC24V, the weight is about 1.7kg, the bearing weight is 3kg, the dimension length is 320 * width 80 * height 60, and the dimension length of the mounting hole is 40mm between the centers of the two holes.
- Strictly control the quality assurance, high stability, high precision and convenient operation. Five advantages provide you with a better use experience: high sensitivity, lift adjustment, all aluminum material, four core aviation plug, stable and reliable.
- The technology is excellent and the operation is worry free. The position switch and limit switch are original Taiwan HIGHLY (3C and CE certified). Seiko forging, each data is strictly controlled, and the quality is guaranteed.
- With the reliable Blow-Back non-high frequency start, the LOTOS Supreme LTP5500DCNC is suitable for CNC application meaning there will be no interference on your CNC computer system.
- The 16ft torch features a “BLOWBACK” design with a Euro-type Central connector. Offering improved consumable life with a patented “BACK STRIKING” design.
- The Non-HF Start pilot arc torch with a Euro-type Central connector offering improved consumable life with a patented “BACK STRIKING” design.
- 2T/4T Function enabled, Latest IGBT Inverter Technology.
- The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor.
Last update on 2024-10-16 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Plasma Thc?
Do you get stressed out thinking about shopping for a great Plasma Thc? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Plasma Thc, which is why we have assembled a comprehensive list of the greatest Plasma Thc available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Plasma Thc that you consider buying. Your questions might include the following:
- Is it worth buying an Plasma Thc?
- What benefits are there with buying an Plasma Thc?
- What factors deserve consideration when shopping for an effective Plasma Thc?
- Why is it crucial to invest in any Plasma Thc, much less the best one?
- Which Plasma Thc are good in the current market?
- Where can you find information like this about Plasma Thc?
We’re convinced that you likely have far more questions than just these regarding Plasma Thc, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Plasma Thc, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Plasma Thc. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Plasma Thc buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Plasma Thc currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Plasma Thc has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Plasma Thc?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Plasma Thc.
- Customer Ratings: Number ratings grade Plasma Thc objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Plasma Thc.
- Product Quality: You don’t always get what you pay for with an Plasma Thc, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Plasma Thc is should be an indication of how long it will work out for you.
We always remember that maintaining Plasma Thc information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Plasma Thc is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is THC device in plasma CNC?
A: This is usually solved with THC device. THC stands for Torch Height Control. For your plasma CNC application you can use PlanetCNC motion control system together with PlanetCNC torch height controller. Torch height controller consists of torch height controller and torch height sensor device.
Q: What is the THC compensation for plasma cutting?
A: THC compensation can be enabled or disabled, as also additional gcode parameters can be used so that machine behaviour will suit your plasma cutting requirements for better cutting results. If speed limit is set then THC will not move Z axis if machine speed is below set speed.
Q: What is torch height control in plasma CNC?
A: THC stands for Torch Height Control. For your plasma CNC application you can use PlanetCNC motion control system together with PlanetCNC torch height controller. Torch height controller consists of torch height controller and torch height sensor device. Torch height sensor device measures arc voltage.
Q: What is the automatic torch Height Control (THC)?
A: The automatic torch height control (THC) is one of the most important elements of the mechanized shape cutter. But it is also the piece of equipment on the cutting machine most likely to be misused, nonfunctional, or even missing.