The Best Rfid Copier of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Rfid Copier of 2022. Check our ranking below.
2,370 (random num) Reviews Scanned
- The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychain，Requirements 2 knots 1.5V AAA batteries
- Small size,light weight(56g),convenient for flow of work, on-site copy
- The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.
- Can be reused, proximity cards can use an unlimited number of times，Please note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.
- Replicator features is super,forced those cards which can only copy one time to be used many times in the host.
- Suitable frequency and type: Rfid reader writer only supports id125kz frequency, does not support other frequencies, rfid reader writer can copy id cards, hid cards and awid cards, rfid reader writer supports writing to t5577, em4305, cet5200, please confirm the frequency and type of the card you want to copy before purchasing.
- Easy to carry and use: Rfid reader small size and light weight (56g), convenient for on-site copying and portable storage
- Wide range of uses: Rfid copier can be used to copy parking cards, access cards, switch cards, etc.
- Reusable: Rfid duplicator needs to be installed with 2 aaa batteries (not included), rfid duplicator can be used about 20,000 times under normal circumstances.
- Rfid reader writer set contains :1 rfid reader writer+5 key fob,+5 cards +instruction manual (please read the instruction manual carefully when using)
- ONLY duplicates onto Keysy branded rewritable Key Fobs and Cards (one included).
- Copy up to (4) RFID Key Fobs or Key Cards (125kHz) into the Keysy Remote.
- Keysy can then emulate these credentials when placed in front of the RFID door reader. *Not all door readers support this function, see product details for more information.
- Keysy can write any previously read key fob or card to the included Keysy oval key fob (Additional sold separately).
- Save time, money and avoid dealing with the building management. NOTE: If you are not sure if your key fob is compatible, contact Tiny Labs before purchasing.
- The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychain，Requirements 2 knots 1.5V AAA batteries
- Small size,light weight(56g),convenient for flow of work, on-site copy
- The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.
- Can be reused, proximity cards can use an unlimited number of times，Please note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.
- Replicator features is super,forced those cards which can only copy one time to be used many times in the host.
- SUPPORT 10 FREQUENCY: ID-125KHz, ID-250KHz, ID-375KHz, ID-500KHz, ID-625KHz, ID-750KHz, ID-875KHz, ID-1000KHZ, IC13.56MHz (ISO1443A/B), HID125kHz Prox cards. NOTE: The software of our machine is ONLY compatible with WINDOWS system, NOT working with MAC system or Linux system; It doesn't work for fully-encrypted cards. By its decoding software, it may work for most half-encrypted cards, BUT NOT ALL. Support read: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, 1386/1326/1346; Support cards write: 1386/1326/1346, T5577, EM4305, Mifare UID cards.
- HOW TO COPY AN UNENCRYPTED CARD: 1.Inserted batteries and powered on 2.Press“OK” when a disclaimer pops up 3.Inserted card into back elastic 4.Press SCAN or READ 5.Replace a Blank with same frequency of the card you want to copy 6.Press WTIRE
- HOW TO DECODE A ENCRYPTION CARD: when connect with PC:there is a DISCLAIMER At this time, do not press the "OK" button or any button on the Reader machine. Enter my computer, Find the removable disk and copy software exe that with RED Logo to another flash drive of your PC. Double-click to open the software, it shows USB connecting, and clik the Start on your screen. it will take about 1-3 minutes. When it shows Deconding is succcessful, replace a blank card, then press WRITE to copy it.
- TIPS:The software for rfid reader is Automatic update ,if no find the update software is NO NEED to update.when the computer recognized as malicious software,it should be exit computer's antivirus software,if not ,the rfid reader's software will be deleted.
- This Deive can not program sensors.
- Support ID Frequency:125khz、175khz、250khz、300khz、375khz、500khz 、etc. Only Supports IC Frequency: 13.56mhz. CAN NOT used with Mac, the file only FIT for windows.The default language is Chinese, but you can choose English at boot time or directly select English in the system Settings.
- The blue card is 125kHz tags and the white T557 125khz HID Cards are blank tags, they Can Not be read and write directly,you need write data into them first and then copy it with a 125KHz RFID card writer.The blue 13.56mhz uid keyfobs (the pattern one ) is IC copy cards, can be read and write directly. All cards can be writable and Rewritable.
- Support Most Blank Copy Cards which incldued Uid、Fuid、Cuid、Zxuid、Euid、Icuid、E5500、E5550、T5577、Em4305、El8265、5200、6200、7200、8200. If you are not sure whether it is suitable, please contact the seller directly.
- NOT SUPPORT IC MF1 S50 TK4100 EM4100 etc. Supported IC, MF1, S50, ID, TK4100, HID26, HID35, HID37, 125KHZ-13.56MHZ;Support some T5577 encryption cards(This is a huge technological update, and no other machine on the market today can do the job. And the operation is more complex, need to access card reader detection).
- HOW TO DECODE A ENCRYPTION CARD: when connect with PC:there is a DISCLAIMER At this time, do not press the "OK" button or any button on the Reader machine. Enter my computer, Find the removable disk and copy software exe that with RED Logo to another flash drive of your PC. Double-click to open the software, it shows USB connecting, and clik the Start on your screen. it will take about 1-3 minutes. When it shows Deconding is succcessful, replace a blank card, then press WRITE to copy it.
- Support read write Frequency: ID125KHz,ID 250KHz,ID 375KHz,ID 500KHz, ID625khz, ID750kHz, ID875KHz, ID1000KHZ, IC13.56MHz,HID 125Khz cards
- Support read: EM4100/EM4200,Mifare classic, UID cards, Ultralight, Ntag203/1386/1326/1346; Support cards write: 1386/1326/1346/T5577/EM4305, Mifare UID cards.
- Not compatible for iClass ,awid , Indala and Keri cards .Applications: access control system, RFID door card, parking card, proximity card, etc.
- The software of our machine is only compatible with Windows system, not working with MAC system or Linux system.
- The applicability of our reader is limited , it cannot match all types of FRID cards. Please read our product description carefully. If your card is not the type listed by us, or if you don’t know the type of your card, please do not buy it, or you can consult us. Thanks!
- 【IMPORTANT REMINDER】①The compatibility of our reader is limited, If your card is not the type listed by us, or if you don’t know whether you can use it, please contact me before purchase. ②The sensing area is on the back of the device. Different types of cards have slightly different sensing positions. If you cannot read them, please adjust the position and try again.
- 【MATCH VARIOUS TYPES OF CARDS】Compatible with ISO 14443 A cards, EM card, Mi-fare classic, AWID card, T5577 card, Ntag 213/215/216, etc. This device can only work for part of 125KHz HID cards, If you just want to use it to read your HID card, please consider carefully.
- 【CRACK ENCRYPTED CARD】Our reader can crack most of 13.56MHz encryption cards. (Please ensure that this operation must connect the reader to the computer).
- 【SUPPORT 10 FREQUENCY KEY CARD】Support read write frequency: 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz (ISO1443A/B), etc.
- 【SMART DISPLAY SCREEN AND USB INTERFACE】HD 2.8 inch full color screen, clear display, built-in multi-lingual. With USB interface, you can connect it to the computer directly.
- The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychain，Requirements 2 knots 1.5V AAA batteries
- Small size,light weight(56g),convenient for flow of work, on-site copy
- The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.
- Can be reused, proximity cards can use an unlimited number of times，Please note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.
- Replicator features is super,forced those cards which can only copy one time to be used many times in the host.
- The coins and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychain，Requirements 2 knots 1.5V AAA batteries
- Small size,light weight(56g),convenient for flow of work, on-site copy
- The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.
- Can be reused, proximity cards can use an unlimited number of times，Please note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.
- Replicator features is super,forced those cards which can only copy one time to be used many times in the host.
Last update on 2024-05-30 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Rfid Copier?
Do you get stressed out thinking about shopping for a great Rfid Copier? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Rfid Copier, which is why we have assembled a comprehensive list of the greatest Rfid Copier available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Rfid Copier that you consider buying. Your questions might include the following:
- Is it worth buying an Rfid Copier?
- What benefits are there with buying an Rfid Copier?
- What factors deserve consideration when shopping for an effective Rfid Copier?
- Why is it crucial to invest in any Rfid Copier, much less the best one?
- Which Rfid Copier are good in the current market?
- Where can you find information like this about Rfid Copier?
We’re convinced that you likely have far more questions than just these regarding Rfid Copier, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Rfid Copier, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Rfid Copier. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Rfid Copier buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Rfid Copier currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Rfid Copier has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Rfid Copier?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Rfid Copier.
- Customer Ratings: Number ratings grade Rfid Copier objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Rfid Copier.
- Product Quality: You don’t always get what you pay for with an Rfid Copier, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Rfid Copier is should be an indication of how long it will work out for you.
We always remember that maintaining Rfid Copier information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Rfid Copier is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is an RFID copier and how does it work?
A: An RFID copier (or an RFID duplicator) is a device that copies the data from one RFID tag and imprints it on another, allowing for multiples of the same tag to be created. How RFID Copiers Work We have already created a helpful step-by-step guide on how to copy or clone a key card or fob.
Q: How do I use the handheld RFID writer?
A: The “ Handheld RFID Writer ” (buy one here for as little as $11) works like this: Turn on the device and hold a compatible EM4100 card or fob to the side facing the hand grip and click on the “Read” button. The device will then beep if it succeeds, now replace the copied tag with an empty tag and press “Write”
Q: Can I make multiple copies of my RFID keycards?
A: This means you’ll have everything you need to create multiple copies of your RFID keycards, tags, or fobs at less than the cost of paying a company to make a single copy for you. There is also the added benefit of knowing that you are in control of your sensitive data. Say you want to make a copy of your apartment keycard or your employee ID tag.
Q: What is the market size of RFID technology?
A: This market sizing includes all the tags, readers and software designed for RFID cards and RFID key fobs, including all form factors. IDTechEx states that the market is estimated to rise to $13.2 billion by 2022. The security industry has experienced a major overhaul with advances in technology.