The Best Scrap Copper Wire Stripping Tool of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Scrap Copper Wire Stripping Tool of 2022. Check our ranking below.
2,207 Reviews Scanned
- Hand Crank Designed: designed with hand cranks,easy to operate.Easily connects to drill for automatic wire stripping or use Handle for manual stripping
- Aluminum Alloy Material: Manual wire stripper with high quality lightweight construction made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety
- Recycle Your Copper: Suitable for removing the plastic and rubber insulation from undamaged scrap wire.You can recycle your copper wire, benefit from non-insulated pure copper wire
- Easy to Use ,Portable & Energy Saving: There is adjustable blade and rollers on the cable wire stripping machine, smoothly and good for any shapes Cable. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom
- Wide Application: This machine is automatic and the wire range is up to 25mm，widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries
- Superior Construction: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use. Equipped with high hardness blades to ensure its operational stability.
- Wide Compatibility: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 1.5mm (0.05”) up to 25mm (0.98”).
- High Stripping Efficiency: This wire stripper features a 180W powerful motor, motorized to save you time, effort, and money. The gearbox leads to fast stripping speed. It creates a fast stripping speed of 60 feet per minute, plus the hands-free design increases security and convenience.
- Easy Operation: The emergency stop button for unforeseen wire jams. All you have to do is slip the intact wire into the feeding hole and turn on the switch. Don't tuck your finger in, though, when it's on.
- Extensive Use: This machine is ideal for whatever hardwire or soft wire. Such copper wire recycler will detach the plastic and rubber insulation from undamaged scrap wire, a must-have for copper wire recycling.
- 【LARGE WIRE DIAMETER】- Our wire stripping machine has two feeding panels of four different sized feed holes, allowing wires in diameter from0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
- 【Portable and Convenient】- Product size: 15X13X31cm (5.91"X5.12"X12.21")，Weight: 6.5kg(14.33 lbs) The lightweight and compact structure is portable and convenient to use anywhere at any time.And the installation procedure is simple, easy to install where you want to install.
- 【HAND-CRANK DRIVEN】- The wire stripper can be driven by winding the hand crank, smooth and easy to use. Also you can start a electric drill to power it for a convinient and fast working.
- 【ALUMINUM & COMPACT】- This wire stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station.
- 【WIDE APPLICATION】- The wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.Suitable for 1.5mm~25mm copper wire ,aluminum wire,single core wire,hard leather wire ,ordinary wire and cable.
- ROBUST ALUMINUM CONSTRUCTION：SENDUO Wire Stripper Machine is made of high quality and sturdy aluminum alloy, the robust form factor ensures durability.It can be used in a variety of harsh environments and maintain its high quality function.THIS PRODUCT HAS BEEN PATENTED,AND COPYING IS NOT PERMITTED.
- TWO OPERATION WAYS: Hand-cranked or drill-driven dual-design use of scrap wire stripper machine.With hand crank, this cable stripper is convenient to operate manually. It also can easily connected to an electric drill via connector for drill-driven operation, which is convenient to use after your arms get tired from tedious hand operation.
- GREATER COMPATIBILITY：SENDUO wire stripper machine for drill has 6 different diameter wire feeding holes. Suitable for scrap wire with a diameter range of 0.06-1.57 inches. Even flat wires,soft electric cable, aircraft wire and more can be easily stripped.
- UPGRADED WIRE PASSING WHEEL:The wire passing wheel adopts lathe precision milling process, which has a stronger grip on the passing waste wires and will not run off during the stripping process.It has a nickel-plated outer layer that will not rust with prolonged use.
- FREE BLADE & GLOVES:65mn spring steel blades,it's strength and hardness, increasing the life of the blade. Extra gloves are included to prevent your hands from getting dirty or injured while working. Allows you to stay focused on your work.
- 𝐀𝐔𝐓𝐎𝐌𝐀𝐓𝐈𝐂 𝐒𝐓𝐑𝐈𝐏𝐏𝐈𝐍𝐆: This Creworks electric wire stripper removes plastic and rubber insulation from old electrical wiring at speeds up to 9.8 ips (0.25 m/s), powering its durable steel blade with a highly efficient 180W motor
- 𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: The 4 separate feeding holes of this portable cable stripper cover every width of copper wire from 7/0 to 15 gauge (0.06-1 inch), letting you safely and easily handle all the most common sizes
- 𝐇𝐄𝐀𝐕𝐘-𝐃𝐔𝐓𝐘 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍: The frame of this 26 lb. wire stripping machine is made of reinforced aluminum for dependable long-term use; the alloy steel blade maintains its edge exceptionally well and ensures a clean cut every time
- 𝐒𝐈𝐌𝐏𝐋𝐄 𝐎𝐏𝐄𝐑𝐀𝐓𝐈𝐎𝐍: Quickly and easily set the blade height to your exact needs using the adjustment knob, hit the power button, and start feeding your copper cable through the appropriate hole
- 1 𝐘𝐄𝐀𝐑 𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘: Get right to work and turn your scrap wires into treasure with this portable wire stripper from Creworks, reassured by its strong warranty and our usual friendly 24/7 customer service!
- Ultra-Grip Wire Stripper Technology: Our stripping machine improved with ultra-grip wire feeder technology. This technology massively increases torque, reduces slippage and straightens mangled wires to get them through the drill-powered wire stripper tool. It will untangle mangled wires effortlessly without any slips or jams. This unique cable stripper is an industrial grade automatic wire stripper for all your scrap wire.
- Portable Wire Stripper: You can bring this wire stripper machine where all the scrap wires and cables need to be stripped. The tool is lightweight, portable, and can easily fit in a bag or at the back of your truck or car for easy transport and storage. This wire stripping machine won't require a lot of space to strip all the copper wire you have. This drill-powered wire stripping machine is manufactured in North America and uses top-grade materials
- Drill-Powered Wire Stripping: Got a hand drill at home? Pair it with the StripMeister original wire stripping machine and you've got a powerful tool that will go through various types of wires, from 18 gauge wire to 250 MCM, including ROMEX and braided (stranded) wire. This wire stripper is your partner for practical and economical wire recycling.
- Versatile Wire Stripper Tool: Our drill-powered wire stripping tool can strip wire scraps of different sizes from #18 wire to 250 MCM and diameters from 0.08″ (2mm) Up To 0.79″ (20.1mm). This wire stripping tool also strips ROMEX and braided (stranded) wires, with ease. Many recyclers of copper wires trust this stripper tool. The Romex slot will save 33% of your time over any other wire insulation stripping tool.
- Efficient Scrap Wire Stripping: This powerful wire stripping machine can handle kinked and twisted cables and wires. You can go through scraps all day faster than you would with manual hand crank wire stripping. No need to tire yourself out, either, because you can reduce your time stripping copper wires with this product.
- A must-have for recycling your copper wire! The uniquely designed Split Design Wire Strippers is small but powerful. Easy to carry, work efficiently, and easy to operate. maximize your return, the best helper for your waste line recycling.
- Simple Operation: Fixing the wire stripper,simple one-handed motion grabs,pulls and makes clean cuts on wires.
- Adjustable Carbide Blade: Three-edged blade is adjustable in depth and can precise stripping of different gauge wire. ULTRA DURABLE.
- Split Design Efficient: Split the stripper into two parts by turning the thumb screw, Quickly cut wires of the same gauge without adjusting the blade.
- For Most of Your Scrap Wire：Strips all sizes from 1 to 9 mm gauge wire.
- Patented New Features--Only Available from TheCopperMine TM:
- Good for wires from 24 AWG to 7/8"
- Input Guide: Wire gets straightened and aligned automatically. Good for kinked or tangled wires.
- EZ Start Cutter: Get the copper out quick & easy after the insulation is slit
- Blade Sharpening Jig: Restore dull blade in seconds.Jig sets the precise angles for easy sharpening.
- 1.This product is a simple Handheld Stripper
- 2.Uses Low-Cost Blades or Conventional blades are available in hardware stores.
- 3.This handheld Stripper for on-the-go users looking to strip small sections of scrap wire.
- 4.This handheld Stripper Suitable for Strips Cords and Coax. Not recommended for wires with thick insulation or rigid solid copper.
- 𝐄𝐅𝐅𝐎𝐑𝐓𝐋𝐄𝐒𝐒 𝐖𝐈𝐑𝐄 𝐒𝐓𝐑𝐈𝐏𝐏𝐈𝐍𝐆: Our manual wire stripper features an easy-to-handle hand crank to power its durable steel blade and remove plastic and rubber insulation from old electrical wiring; connect this hand tool to your electric drill for automatic cranking
- 𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: The adjustable feeding panel of this portable cable stripper covers every width of copper wire from 7/0 to 15 gauge (0.06-1 inch), letting you safely and easily handle all the most common sizes
- 𝐇𝐄𝐀𝐕𝐘-𝐃𝐔𝐓𝐘 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍: The frame of this 6.2 lb. wire stripping machine is made of reinforced aluminum for dependable long-term use; the alloy steel blade maintains its edge exceptionally well and ensures a clean cut every time
- 𝐒𝐈𝐌𝐏𝐋𝐄 𝐎𝐏𝐄𝐑𝐀𝐓𝐈𝐎𝐍: Quickly and easily set the blade height to your exact needs using the adjustment knob, feed your copper cable through the appropriate hole, and turn the hand crank to start peeling off the insulation
- 1 𝐘𝐄𝐀𝐑 𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘: Get right to work and turn your scrap wires into treasure with this Creworks manual wire stripper, reassured by its strong warranty and our usual friendly 24/7 customer service!
Last update on 2022-08-31 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Scrap Copper Wire Stripping Tool?
Do you get stressed out thinking about shopping for a great Scrap Copper Wire Stripping Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Scrap Copper Wire Stripping Tool, which is why we have assembled a comprehensive list of the greatest Scrap Copper Wire Stripping Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Scrap Copper Wire Stripping Tool that you consider buying. Your questions might include the following:
- Is it worth buying an Scrap Copper Wire Stripping Tool?
- What benefits are there with buying an Scrap Copper Wire Stripping Tool?
- What factors deserve consideration when shopping for an effective Scrap Copper Wire Stripping Tool?
- Why is it crucial to invest in any Scrap Copper Wire Stripping Tool, much less the best one?
- Which Scrap Copper Wire Stripping Tool are good in the current market?
- Where can you find information like this about Scrap Copper Wire Stripping Tool?
We’re convinced that you likely have far more questions than just these regarding Scrap Copper Wire Stripping Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Scrap Copper Wire Stripping Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Scrap Copper Wire Stripping Tool. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Scrap Copper Wire Stripping Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Scrap Copper Wire Stripping Tool currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Scrap Copper Wire Stripping Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Scrap Copper Wire Stripping Tool?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Scrap Copper Wire Stripping Tool.
- Customer Ratings: Number ratings grade Scrap Copper Wire Stripping Tool objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Scrap Copper Wire Stripping Tool.
- Product Quality: You don’t always get what you pay for with an Scrap Copper Wire Stripping Tool, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Scrap Copper Wire Stripping Tool is should be an indication of how long it will work out for you.
We always remember that maintaining Scrap Copper Wire Stripping Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Scrap Copper Wire Stripping Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is the best tool to strip copper wire?
A: Razor or Handheld Tool: When you are dealing with a few loads of wire a month and not pulling in a large quantity, it may be worth it to just use a razor or handheld wire stripper for your copper.
Q: What is the best way to process scrap copper?
A: One of the best ways for stripping scrap copper wire s is to use a Multi-Feed wire stripping machine. Hands down, the most economical and fastest way to process scrap copper. All you have to do is put the wire into the right size feed hole and away you go. Multi-Feed wire stripping machines feature spring tension systems.
Q: Will a power tool strip scrap wire?
A: Yes, it will strip scrap wire, but it may not be the most efficient method. In fact, you probably are going to get tired of the wire slipping out from under the blade which is one of the most common complaints about these units.
Q: How much does it cost to strip copper wire?
A: If you have never stripped copper wire before, we’re not going to suggest going out and buying an expensive wire stripper ($300-500) right away. Like a business plan, you have to figure out how much weight you are going to be pulling in on a regular basis and if an investment like that is going to be worth it for you.