The Best Sparkfun Battery Shield of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Sparkfun Battery Shield of 2022. Check our ranking below.
2,175 Reviews Scanned
- Headers and Connectors Pre-Soldered
- Compatible with the Photon and the Core
- Battery not included
- This battery shield uses a MCP73831 for LiPo charging and a MAX1704X for fuel gauging
- SparkFun MIDI Shield
- Soldering required
- Arduino Format Shield
- Control synthesizers, sequencers, and other musical devices
- Humidity/Temperature Sensor - Si7021
- Barometric Pressure - MPL3115A2
- Light Sensor - ALS-PT19
- On board 3.3V regulator
- Works with Arduino and compatible boards
- This module is for 18650 batteries.
- This module can be used to power both Arduino or Raspberry Pi and sensors.
- The output current of this mode can reach 2A, which can supply power to many control boards.
- Battery protection (overcharge or overdischarge).
- Micro USB port input, Type A USB output.
- LiPo Charger and LiPo Fuel Gauge combined into one board
- DIP-switch-selectable charge rates of 100mA, 500mA or 1.5A
- MicroUSB port for charging, or external options
- On/Off switch disconnects the battery for more power saving
- 5V-tolerant I2C interface to fuel gauge Fuel gauge measures voltage, percentage, and current
- GPS modules are hard to come by, but an I2C GPS+GLONASS module? Now we're cooking with peanut oil!
- This module is configured with an on-board RTC battery that enables a warm-start functionality. (Giving the XA1110 just five seconds to first fix). A U.FL connector gives you the option to hook up an external antenna via a U.FL cable
- Also utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and Serial ports simultaneously. Using I2C means you won't have to tie up your serial port with GPS, leaving it open to other possibilities.
- With support of GPS, GLONASS, QZSS, SBAS (WAAS, EGNOS, MSAS, GAGAN) and more, the onboard XA1110 can provide even more accurate positioning in multiple locations.
- This GPS Breakout supports up to 210 PRN channels with 99 acquisition channels and 33 simultaneous tracking channels.
- MSGEQ7 graphic equalizer display filter
- Arduino Shield
- collaboration with Ben Moyes of Bliptronics
- Headers required (not included)
- Connector: 6" wires stripped and tinned last 5mm, 24 AWG
- Size: 133.5mm x 74mm x 31mm
- Number of cells: 4
- Skill Level: Assembled and Tested
- The SparkFun Qwiic Shield compatible with Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your boards
- The Qwiic ecosystem allows for easy daisy-chaining so, as long as your devices are on different addresses, you can connect as many Qwiic devices as you'd like.
- This shield is sized to work with the footprint of 4.0, 3.2, and LC. This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your board to four SparkFun Qwiic connectors (two horizontally and two vertically mounted).
- Compatible with Teensy 4.0, 3.2, or LC Footprint Compatible, 4x Qwiic Connection Ports, "PROG" Button w/ satisfying tactile feedback, I2C Jumper, 3.3V and GND Buses
- Includes: SparkFun Qwiic Shield compatible with Teensy and Header Kit
- Includes: 1x SparkFun OpenLog Artemis, 1x SparkFun Qwiic Scale - NAU7802, 1x SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A), 1x Lithium Ion Battery - 1250mAh (IEC62133 Certified), 1x microSD Card - 1GB (Class 4), 1x Reversible USB A to C Cable - 0.8m, 1x Flexible Qwiic Cable - 50mm, 1x Flexible Qwiic Cable - 100mm
- Inside the kit you will find a reversible USB-A to C cable for power, a 1250mAh LiPo battery for remote applications, a 1GB microSD card, & all the necessary Qwiic cables to connect the included boards.
- The SparkFun Qwiic Mux Breakout & SparkFun Qwiic Scale are included to enable access to data from any & all Qwiic sensors you may be using in each unique project application.
- The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
- Note: This kit does not include a load cell or sensors.
Last update on 2023-12-19 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Sparkfun Battery Shield?
Do you get stressed out thinking about shopping for a great Sparkfun Battery Shield? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Sparkfun Battery Shield, which is why we have assembled a comprehensive list of the greatest Sparkfun Battery Shield available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Sparkfun Battery Shield that you consider buying. Your questions might include the following:
- Is it worth buying an Sparkfun Battery Shield?
- What benefits are there with buying an Sparkfun Battery Shield?
- What factors deserve consideration when shopping for an effective Sparkfun Battery Shield?
- Why is it crucial to invest in any Sparkfun Battery Shield, much less the best one?
- Which Sparkfun Battery Shield are good in the current market?
- Where can you find information like this about Sparkfun Battery Shield?
We’re convinced that you likely have far more questions than just these regarding Sparkfun Battery Shield, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Sparkfun Battery Shield, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Sparkfun Battery Shield. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Sparkfun Battery Shield buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Sparkfun Battery Shield currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Sparkfun Battery Shield has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Sparkfun Battery Shield?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Sparkfun Battery Shield.
- Customer Ratings: Number ratings grade Sparkfun Battery Shield objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Sparkfun Battery Shield.
- Product Quality: You don’t always get what you pay for with an Sparkfun Battery Shield, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Sparkfun Battery Shield is should be an indication of how long it will work out for you.
We always remember that maintaining Sparkfun Battery Shield information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Sparkfun Battery Shield is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- Waterproof Eye Shield Cap Hat Shield
- Shield Tablet Replacement Battery
- Nvidia Shield K1 Battery
- Dermatouch Sun Smart Hair And Scalp Shield
- Arduino Nano Shield I/O Extension Board Expansion Xd-212
- Dermatouch Hair And Scalp Shield
- Sainsmart L293D Motor Drive Shield For Arduino Duemilanove Mega Uno R3 Avr Atmel
- Sunfounder Iic I2C Twi Serial 2004 20X4 Lcd Module Shield For Arduino Uno Mega2560
- Magnum Shield 8.0 Sz Wp Men’S Tactical Boots
- Sofa Bed Support Bar Shield