The Best Topping Tp60 of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Topping Tp60 of 2022. Check our ranking below.

2,340 Reviews Scanned

Rank No. #1

Topping PA5 II Speaker Amplifier Compact Desktop Amplifier Fully Balanced AMP (PA5 II, Black)

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop.
THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N<0.0004%; When outputting 5W under an 8 Q load, THD+N <0.0003%. The extremely low distortion level takes your music experience to the next level.
High output power The PA5 II Plus is capable of delivering up to 140W x 2 for 4-ohm loads at 10% distortion, and 125W X 2 for 4-ohm loads even when the standard is raised to 1% distortion. Similarly, the PA5 I can output 100W x 2 for a 4-ohm load at 1% distortion. High output power and low distortion characteristics make PA5 II series amplifiers sufficient to meet the needs of most speakers and use occasions.
Comprehensive circuit protection It has no noise when turned on or off, and has complete protection for overvoltage, undervoltage, short circuit, overcurrent, and overheating. Even if there is an unexpected power outage, it will not generate noise, making you worry free to use.
Special partner- D10 Balanced D10 Balanced can provide high fidelity USB decoding function and TRS balanced output. When used with PA5 II series amplifiers, it is equivalent to adding a high-performance USB input jack to the PA5 II series amplifiers. This combination is both concise and efficient when only USB input and amplifier output are required.

Rank No. #2

TOPPING DX3Pro+ LDAC Headphone Amplifier, ES9038Q2M Bluetooth 5.0 DAC, NFCA Audio Decoder, USB/Optical/Coax Inputs, with Remote Control, Headphone Amp, Line Out, Pre-Amp Function (Black)

【High-Resolution Wireless Audio】 Supports LDAC, aptX-HD, aptX-LL, AAC, and SBC via Bluetooth 5.0 using the QCC5125 chipset, with decoding handled by the ES9038Q2M DAC for superior wireless sound quality.
【Plug-and-Play HiFi DAC】 Powered by 2nd-gen XMOS XU208, the DX3Pro+ supports PCM 32bit/768kHz and DSD512 native, fully compatible with Windows, Mac, Linux, iOS, and Android systems.
【Optimized NFCA Headphone Amplifier】 Delivers ultra-low noise and distortion with 1800mW x2 @32Ω output, easily driving both sensitive IEMs and high-impedance headphones.
【Dual Gain Settings】 Switch between +6dB low gain and +19dB high gain to match different headphone sensitivities and achieve ideal performance.
【High-Performance ES9038Q2M DAC】 Achieves extremely low distortion (THD+N 0.00015%) for accurate, detailed, and natural sound reproduction.

Rank No. #3

Topping DX5II Fully Balanced DAC Headphone Amp Combo - Dual ES9039Q2M 10 Band PEQ DSD512 Native PCM768kHz 6.35mm SE 4.4mm Balanced 4pin XLR Balanced Output (Black)

👍 A big upgrade for a proven performer ▶️ The DX5 II is TOPPING’s new fully balanced DAC and headphone amp combo. Each channel (left and right) utilizes an independent ESS new DAC chip — ES9039Q2M. That means lower crosstalk, better imaging, and an improvement in specs: 133dB SNR, 133dB dynamic range, and distortion as low as 0.00006%.
👍 X-Hybrid Headphone Amplifier Circuit ▶️ The DX5 II replaces the NFCA module with an original triple-stage hybrid amp circuit. It uses a discrete input stage, op-amp gain stage, and discrete output stage. The result is high efficiency, improved thermals, and precise delivery at every volume. Power output peaks at 7600mW x2 into 16Ω—more than enough for basically any headphone.
👍 Wide range of adaptation to headphones ▶️ DX5 II is equipped with 6.35mm single-ended, 4.4mm balanced, and 4-pin XLR headphone jack,meeting the needs from low-sensitivity headphones to high-sensitive IEMs. With a low noise floor of just 1.8uVrms, even the most sensitive IEMs remain free from any audible background hiss.
👍 10-band high-precision PEQ ▶️ The desktop software lets you tweak 10 independent frequency bands—adjusting frequency, gain, and Q-factor. Save multiple profiles, apply different EQ to your speakers and headphones, and import and export curves.
👍 LDAC wireless available ▶️ Equipped with QCC5125 chip, DX5 II supports Bluetooth 5.1 and can support up to 96kHz/24bit. Also it fully supports LDAC/aptX-Adaptive/aptX HD/AAC/SBC and other audio encodings, allowing high-quality audio to be transmitted wirelessly to provide a music experience beyond CD level.

Rank No. #4

TOPPING D50 III Desktop HiFi DAC & Preamplifier, Dual ES9039Q2M, Bluetooth 5.1, Hi-Res Audio, DSD512/PCM768kHz Support, RCA/TRS Outputs, Includes 12V Trigger and Remote Control (Black)

【Dual ES9039Q2M DAC Chips】- Equipped with dual ES9039Q2M chips, the TOPPING D50III DAC offers a higher SNR of 132dB, an expansive dynamic range of 132dB, and ultra-low distortion (<0.00006% THD+N), delivering exceptional audio clarity and detail. This makes it an ideal choice for a stereo preamplifier or Topping DAC headphone amplifier setup in your home stereo system.
【Advanced I/V Conversion Circuit】- The newly designed I/V conversion circuit in this Topping DAC enhances audio reproduction by providing lower distortion and noise. This optimization fully maximizes the DAC chip's performance, ensuring superior sound quality, whether used as a preamp amplifier or as part of a stereo receiver system.
【High-Resolution Wireless Audio】- Featuring the QCC5125 Bluetooth 5.1 chipset, the TOPPING D50III DAC supports LDAC, aptX-HD, aptX-Adaptive, and AAC, with wireless audio transmission up to 96kHz/24bit. This capability offers a music experience that exceeds CD quality, perfect for pairing with a turntable player, phono preamp, or tube amp setup.
【Versatile Output Options】- The TOPPING D50 III includes both RCA and TRS balanced outputs, with selectable TRS 4V/RCA 2V for standard use or enhanced TRS 5V/RCA 2.5V for improved performance. This flexibility allows compatibility with a wide range of audio devices, making it suitable as a preamplifier home audio component or even in a passive amplifier configuration.
【Preamplifier Mode for Enhanced Control】 - The TOPPING D50III DAC offers a preamplifier mode, allowing volume adjustment directly on the device. This feature is ideal for use with active speakers, audio amplifiers, or as part of a home stereo system, providing greater control over your audio setup, especially when used as a tube preamplifier or stereo preamplifier.

SaleRank No. #5

Fosi Audio ZD3 Desktop DAC Preamp, Fully Balanced Digital to Analog Audio Converter with ES9039Q2M for Home Stereo Amplifier, Bluetooth/USB/Optical/Coax/TV HDMI ARC Input, XLR/RCA Output with Remote

Flagship Desktop DAC: A fully balanced digital-to-analog converter preamp with multiple inputs and outputs. Fosi Audio's first DAC to support HDMI ARC input and comes equipped with a high-performance ES9039Q2M chip to deliver rich and superior sound
Premium Chipset: The ZD3 features the chipset consisting of XMOS XU316+ES9039Q2M+QCC3031+LME49720. It supports high audio resolution, with a maximum capability of DSD512 and PCM 32bit/768kHz sampling rates, providing unparalleled clarity and depth
Versatile & Flexible: The ZD3 offers comprehensive connectivity, supporting inputs like Bluetooth, USB, OPT, COAX, HDMI ARC, and balanced XLR/RCA outputs. This flexibility allows you to customize your audio system to suit various setups and scenarios
Ease of Use: The ZD3 adopts a 1.5-inch OLED display, remote control, preamp bypass switch, and 12V trigger in/out interfaces, allowing synchronized power on/off with other home audio devices, all for a good user experience
Family Design: Featuring the same design language as the ZA3 amplifier: compact and exquisite appearance and audiophile-grade components for high performance and excellent sound quality. Pair it with the ZA3 to create a robust home audio system

Rank No. #6

TOPPING DX1 Mini DAC & Headphone Amplifier, AK4493S Chip, 280mW x2, Supports DSD256 PCM384, 6.35mm & 3.5mm Outputs, Discrete LNRD for Windows, MAC, iOS, Android, HiFi Audio (Black)

【Superior Sound Quality with AK4493S Chips】: The TOPPING DX1, featuring AKM's latest AK4493S chip, delivers rich, detailed sound for an enhanced audio experience. Ideal for use in HiFi DAC, stereo amplifier, or dac amp combo setups, this chip upgrade ensures top-notch audio clarity, making it perfect for both home and portable headphone amplifier needs.c
【Plug and Play Compatibility】: The TOPPING DX1 transforms your PC into a HiFi source effortlessly, compatible with Windows, Mac, Linux, iOS, and Android. As a versatile USB DAC, it works seamlessly with headphone amps, bluetooth receivers, and dac amp for PC setups, ensuring stable performance across all platforms.
【Plug and Play Compatibility】: The TOPPING DX1 transforms your PC into a HiFi source effortlessly, compatible with Windows, Mac, Linux, iOS, and Android. As a versatile USB DAC, it works seamlessly with headphone amps, bluetooth receivers, and dac amp for PC setups, ensuring stable performance across all platforms.
【Ultra-Low Noise with LNRD Circuit】: The TOPPING DX1 features a Discrete LNRD circuit, reducing noise to ultra-low levels, perfect for sensitive IEMs or headphone amp use. Ideal for HiFi DAC and stereo receiver amplifier setups, it ensures crystal-clear audio with DAC noise below 2.0uV and AMP noise below 1.0uV.
【Compact Design, Powerful Output】: Despite its small size, the TOPPING DX1 delivers up to 280mW x2, driving a wide range of headphones without needing extra power. This portable headphone amplifier fits perfectly in desktop amplifier or dac amp combo setups, providing powerful, high-quality audio output.

Rank No. #7

Topping P50 Linear Power Supply for Topping D50/D50s/DX3 Pro/A50 110V-240V (Silver)

Match to D50/D50s/DX3 Pro/A50
The sealed toroidal transformer has small magnetic leakage and low noise, which is very suitable for HIF use And the transformer is designed to suppress EMC and noise.
The 15V modules provides more than 10000uF capacitors in total and the 5V modules provides total more than 8000uF capacitors in total,giving the output enough energy reserves.
Instrument Level-ultra Low Noise Linear Regulator
115V for AC100V-120V 50/60HZ,230V for AC220V-240V

Rank No. #8

Topping E30 II DAC Preamp Audio Decoder- 2xAK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)

👍 Supports high-resolution audio ▶️ TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip.
👍 Coaxial and Optical also has good performance ▶️ The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30.
👍 5V power supply,anytime and anywhere ▶️ E30 II uses DC5V for power supply, which can easily access almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. The built-in protection circuit will protect the E30 II and prompt on the screen after connecting to the wrong power supply.
👍 Discrete LNRD ▶️ How to solve the noise problem of 5V power supply? The E30 II's answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30 II. With this technology, the noise floor of E30 II is lower than 1 .5uV.
👍 Pure DAC & DAC+Preamp application ▶️ E30 II is able to fix to maxmum output level so that it can be worked as a pure DAC. E30 II has built-in volume control function that can adjust the volume from -99dB to 0dB by using the remote control, so you are able to directly connect E30 II to power amplifier or active speakers, and control the volume of E30 II through remote control.

Rank No. #9

TOPPING E30 II DAC – Dual AK4493S Chips, Hi-Res Audio, USB/Optical/Coaxial Inputs, Ultra-Low Noise Power Supply, PCM & DSD Decoding, Auto On/Off, Preamp Mode & Remote Control (E30 II - Black)

【Dual AK4493S DAC Chips for High-Fidelity Sound】 – The TOPPING E30 II uses dual AK4493S DAC chips, delivering rich detail and clarity beyond single-chip DACs for a superior HiFi audio experience.
【Versatile USB & Digital Inputs】 – Supports USB, coaxial, and optical (Toslink) inputs with low jitter performance up to 24bit/192kHz, making it ideal for PCs, game consoles, and digital turntables.
【Low-Noise 5V Power Supply】 – Powered via mini USB, compatible with PCs, phone chargers, or power banks. The Discrete LNRD circuit ensures clean, interference-free audio.
【Customizable Sound with Multiple Filter Modes】 – Offers six PCM filters and two DSD modes, plus a Pure DAC mode for direct DSD playback, delivering an unaltered, high-resolution audio experience.
Preamp & Auto On/Off for Convenience】 – Features volume control via remote, a built-in preamp mode, and auto power-on when detecting a signal, making it ideal for active speakers and amplifiers.

Rank No. #10

Topping E30II lite DAC Preamp - AK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)

👍Supports high-resolution audio▶️ The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD <0.0004%. This not only ensures the high accuracy of audio signal restoration but also gives you a live music experience as if you were there.
👍Professional performance, instant listening▶️ E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11, MAC, Linux and iOS/Android systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems*.
👍Preamp Mode▶️ The E30 II lite is equipped with a built-in volume control function that makes it easy to adjust the volume from -99dB to 0dB using the remote control. The E30 II lite can also be connected directly to an amplifier, pure power amplifiers or active speakers, controlling the volume level through the E30 II lite, allowing you to enjoy music more comfortably.
👍Coaxial and Optical▶️ The optical and coaxial input of E30 II lite supports up to 24bit/192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipment can also give a new sound.
👍Good partner ——L30 II headphone amplifier ▶️ E30 II lite and L30 II have the same design concept, both detailed workmanship and sound quality performance show the high quality of the product. The L30II headphone amplifier can drive most of the headphones on the market and match perfectly. Whether you are a music enthusiast or an everyday user, its excellent sound quality can meet your needs.

Last update on 2025-09-19 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Topping Tp60?

Do you get stressed out thinking about shopping for a great Topping Tp60? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Topping Tp60, which is why we have assembled a comprehensive list of the greatest Topping Tp60 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Topping Tp60 that you consider buying. Your questions might include the following:

Is it worth buying an Topping Tp60?
What benefits are there with buying an Topping Tp60?
What factors deserve consideration when shopping for an effective Topping Tp60?
Why is it crucial to invest in any Topping Tp60, much less the best one?
Which Topping Tp60 are good in the current market?
Where can you find information like this about Topping Tp60?

We’re convinced that you likely have far more questions than just these regarding Topping Tp60, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Topping Tp60, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Topping Tp60. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Topping Tp60 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Topping Tp60 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Topping Tp60 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Topping Tp60?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Topping Tp60.
Customer Ratings: Number ratings grade Topping Tp60 objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Topping Tp60.
Product Quality: You don’t always get what you pay for with an Topping Tp60, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Topping Tp60 is should be an indication of how long it will work out for you.

We always remember that maintaining Topping Tp60 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Topping Tp60 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What makes the topping tp60 so special?

A: Flush with features, the Topping TP60 is built around the Tripath TA2022 which features DPP™ digital power processing and includes one dedicated toroidal transformer per channel for extremely stable rail voltages; making for an amplifier that lives up to its rated output without running out of gas.

Q: Is the tp60 the perfect mini amplifier for audiophiles?

A: As the flagship of the Topping line of mini amplifiers, the TP60 is an exercise in no-holds barred design creating—quite possibly—the perfect amplifier for audiophiles.

Q: What is the difference between the fx502spro and the tp60?

A: Rear speaker terminals on the FX502SPro are toy sized whereas the TP60’s are much more substantial. FX Audio rates the FX502SPro at 70 watts per channel. Topping states 80 watts/channel for TP60. Let’s get into the measurements and see how real those numbers are.

Q: When did the topping T60 Class-T digital amplifier mkll come out?

A: They established in 2008 and they now have an expanding catalog of portable and desktop budget audio equipment. In 2014, they released an updated version—the Topping T60 Class-T Digital Amplifier Mkll.