Skip to content

The Best Totalboat Epoxy Fairing Compound of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Totalboat Epoxy Fairing Compound of 2022. Check our ranking below.

2,634 Reviews Scanned

Rank No. #1
TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit)
  • HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
  • SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
  • EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
  • CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
  • CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
Rank No. #2
TotalBoat - 512949 Polyester Fairing Compound (Quart Kit)
  • PREMIUM MARINE-GRADE 2-part polyester fiberglass filler and fairing compound for cosmetic repairs on gelcoat, fiberglass and other composite surfaces above the waterline; fill pinholes, print-through, spider cracks, sanding marks & other surface defects
  • VERSATILE FIBERGLASS FAIRING COMPOUND has multiple uses, including repairing fiberglass parts & molds, and quick cosmetic repairs to fiberglass decks and hulls
  • EASY TO APPLY by trowel or spreader; buttery consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces; ideal as a finishing putty over high-strength TotalBoat Polyester Structural Repair Putty
  • CURES FAST, EASY TO SAND: Fast-setting fairing filler cures in just 20-30 minutes at 77°F, with minimal shrinkage and no pinholes; easy to sand smooth in preparation for gelcoat or primer and paint
  • AVAILABLE IN 2 SIZES: QUART KIT AND GALLON KIT: Each includes MEKP catalyst; At 77°F, add 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound for a working time of 10-15 minutes, with a cure time of roughly 20-30 minutes
Rank No. #3
Fasco Epoxies Fas-Fair #26 Epoxy Fairing Compound Quart Kit
  • A light weight compound for fairing surfaces of fiberglass, metal, wood, foam, masonry, and most plastics.
  • Easy to mix 1 to1 mix ratio - just mix the white and red components until there is no streaks. Creamy smooth consistency makes it easy to spread and feather to a fine edge; will not sag on vertical and overhead surfaces
  • Cures Fast. Easy to sand Quick-drying compound is ready to sand in 3 hours at 76°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
Rank No. #4
TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)
  • PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
  • MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
  • EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won’t sag
  • FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
  • AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings
SaleRank No. #5
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two Cans, Off White 80115
  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
  • High-tack paste can be used in vertical and overhead applications
  • Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
Rank No. #6
TotalBoat - 512884 Fixwood | Marine Grade Epoxy Putty | Stainable Paste Filler for Damaged Wood Repair or Replacement (2-Pint Kit), white
  • MAKE REPAIRS THAT LAST: Marine grade 2 part epoxy putty lets you make permanent repairs to rotted, missing, or damaged wood, including soft wood, dry rot & other damage
  • EASY TO USE: Just mix in equal parts and apply. Can be molded to any shape, and stays in place on vertical surfaces. Will not sag, shrink or crack. For interior & exterior use
  • WIDE RANGE OF USES: Repair wood stairs, doors, garage door frames, stair posts, exterior walls, fascia boards, rafters, window sills, shutters, door frames, door hinges, wood ladders, split wood, deck boards, and other damage
  • ACTS LIKE WOOD: Cured putty can be sanded, carved, drilled, cut, painted, or stained to blend easily with the surrounding wood species. High-strength repairs can also be fastened with nails and screws
  • WATERPROOF: 100% waterproof once cured. For deep rot, use TotalBoat Penetrating Epoxy to consolidate wood first. Sizes: 2-Pint and 2-Quart Kit. Each kit contains equal parts Part A (resin) and Part B (hardener)
Rank No. #7
System Three QuikFair Epoxy Fairing Putty, 3 Quart Kit
  • Premium Epoxy: QuikFair is a lightweight, microballoon-filled, fast-curing 2-part epoxy fairing putty engineered to provide excellent moisture resistance
  • Easy To Apply: This epoxy putty boasts a non-sagging, butter-like consistency that makes it easy to measure by weight or volume; The 2 color-coded parts can easily be mixed to form a 3rd color
  • Versatile Application: Our marine-grade epoxy can be used on both fiberglass and wood-epoxy boats above or below the waterline
  • Fast Curing: At 70ºF, our fiberglass and wood epoxy is sufficiently cured to sand exceptionally well within 4-6 hours; Meaning you can apply 3 coats each 24 hours in a standard 8-hour shift or 6 on a round-the-clock basis
  • For Best Results: Apply at 50ºF or above and always sand QuikFair marine epoxy before applying additional coats of putty, resin, or other coatings/finishes to ensure good adhesion
Rank No. #8
Fasco Epoxies Inc. Fas-Fair #26 Epoxy Fairing Compound Gallon Kit
  • A light weight compound for fairing surfaces of fiberglass, metal, wood, foam, masonry, and most plastics.
  • Easy to mix 1 to1 mix ratio - just mix the white and red components until there is no streaks. Creamy smooth consistency makes it easy to spread and feather to a fine edge; will not sag on vertical and overhead surfaces
  • Cures Fast. Easy to sand Quick-drying compound is ready to sand in 3 hours at 76°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
Rank No. #9
TotalBoat Flexible Resin Spreaders Set - Reusable Scrapers for Epoxy, Fillers, Putty, Caulk, Spackling Paste, Polyester Resin and Adhesives
  • MULTI-USE PLASTIC SPREADERS for smooth, precise application of putties, fillers, resins and other liquid and thickened materials used in a variety of boat repair, composite, automotive, home repair, art and woodworking applications
  • FIRM, FLEXIBLE & DURABLE: Long-lasting scrapers are sturdy, with flexible edges that bend without breaking or cracking
  • EASY TO CLEAN & REUSABLE: When you're done using the spreader, just bend it and any dried material will peel off easily so you can reuse many times
  • VERSATILE SET INCLUDES 3 SPREADERS: V-NOTCHED EDGE spreads thickened adhesives and fillers at a consistent depth over large areas; STRAIGHT EDGE for even spreading, smoothing filler flush to the surface, saturating fiberglass with resin, and removing air bubbles from GRP layups; CURVED EDGE for making smooth fillets and fairing curves
Rank No. #10
TotalBoat 5:1 Epoxy Resin (5 Gallons)
  • Traditional 5:1 low-viscosity marine epoxy resin cures to a high-strength solid ideal for laminating, bonding, coating, reinforcing, and fairing applications
  • Bonds strongly with wood, fiberglass, metals, and reinforcement fabrics. Add fillers for an excellent fairing or filleting compound, or stronger adhesive
  • Wets out fiberglass and other composite fabrics easily, and cures in a wide temperature range, with minimal shrinkage
  • Use with TotalBoat 5:1 Fast, 5:1 Slow, Tropical Extra Slow, and Crystal Clear Hardeners
  • Available in Quart, Gallon, and 5-Gallon sizes. Resin ONLY, all hardeners sold separately. Compatible with other 5 to 1 epoxy systems.

Last update on 2024-01-27 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Totalboat Epoxy Fairing Compound?

Do you get stressed out thinking about shopping for a great Totalboat Epoxy Fairing Compound? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Totalboat Epoxy Fairing Compound, which is why we have assembled a comprehensive list of the greatest Totalboat Epoxy Fairing Compound available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Totalboat Epoxy Fairing Compound that you consider buying. Your questions might include the following:

  • Is it worth buying an Totalboat Epoxy Fairing Compound?
  • What benefits are there with buying an Totalboat Epoxy Fairing Compound?
  • What factors deserve consideration when shopping for an effective Totalboat Epoxy Fairing Compound?
  • Why is it crucial to invest in any Totalboat Epoxy Fairing Compound, much less the best one?
  • Which Totalboat Epoxy Fairing Compound are good in the current market?
  • Where can you find information like this about Totalboat Epoxy Fairing Compound?

We’re convinced that you likely have far more questions than just these regarding Totalboat Epoxy Fairing Compound, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Totalboat Epoxy Fairing Compound, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Totalboat Epoxy Fairing Compound. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Totalboat Epoxy Fairing Compound buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Totalboat Epoxy Fairing Compound currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Totalboat Epoxy Fairing Compound has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Totalboat Epoxy Fairing Compound?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Totalboat Epoxy Fairing Compound.
  5. Customer Ratings: Number ratings grade Totalboat Epoxy Fairing Compound objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Totalboat Epoxy Fairing Compound.
  7. Product Quality: You don’t always get what you pay for with an Totalboat Epoxy Fairing Compound, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Totalboat Epoxy Fairing Compound is should be an indication of how long it will work out for you.

We always remember that maintaining Totalboat Epoxy Fairing Compound information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Totalboat Epoxy Fairing Compound is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: