Skip to content

The Best Usb 3.1 Gen 2 Front Panel of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Usb 3.1 Gen 2 Front Panel of 2022. Check our ranking below.

2,015 Reviews Scanned

Rank No. #1
EZDIY-FAB 5.25in 10Gbps USB 3.1 Gen2 Hub and Type-C Port,Front Panel USB Hub with QC 3.0 Quick Charging
  • Ultimate USB-C & USB-A Charging and Data Hub: USB 3.1 Generation 2 compatible for all ports. Transfer data at 10 Gbps for each port.
  • 1x USB Type-C 3.1 Gen2 Port: The EZDIY Hub is focused on the future of USB-C and its most versatile and powerful specifications. The EZDIY Hub was built for power users to replace their old legacy USB 3.0 hubs.(5V/3A)
  • 3x USB-A Gen2 Ports: Legacy USB-A ports will be sticking around for a while. The VertexHUB has three ports for any type of legacy USB-A peripheral device you have. Upgraded to support 10 Gbps for each port and provide power delivery for tablets and phones.(5v/2.4A)
  • 2x QC3.0 Charging Ports, Max out 18W/port, built-in smart IC chip, provides short-circuit, over-heat, over-current, over-voltage, over-charge protection; charging only, no data transfer.
  • Elegant Brushed Aluminum Alloy panel, Dimension Fit any 5.25” computer case front bay
Rank No. #2
FebSmart 19Pin USB 3.0 Header to USB 3.1/3.2 Gen 2 Type E Key A Ports Adapter-5Gbps Max Speed-Extend USB Type E Ports to PCs Front Panel USB-C Ports (FS-U3EC 1-PCS)
  • 1. Covert USB 3.0 19Pin header to USB 3.1/3.2 Gen 2 Type E Key A Ports. The USB 3.1/3.2 Type E Key A ports can be extended to PCs front pannel USB-C ports.
  • 2. Input connector type: 19Pin USB 3.0 Header, Output Connector Type: USB 3.1/3.2 Gen 2 Type E Key A Ports, extend to PCs front pannel USB-C ports.
  • 3. Due to the input signal is superspeed USB 3.0 5Gbps max, the connect speed will limited in 5Gbps max. Can not get USB3.1/3.2 Gen 2 Ports full speed 10Gbps.
  • 4.Compatible with all brand mother board that have USB 3.0 header ports, will works on all Windows and Linux systems.
  • 5.Warning: This USB covertor will pick up power from mother board 1X USB header directly. Most USB ports will provide 5V/2A max power supply for connected device, NOT support PD fast charging.
Rank No. #3
MZHOU USB 3.1 Type C Front Panel Header Extension Cable 57 cm, USB 3.1 Type E to USB 3.1 Type C Cable Gen 2 Speed up to 10 Gbps Internal Adapter Cable,with Mount Screw (0.5m)
  • 【FEATURES】You can use this board to convert the motherboard's USB3.0 interface to TYPE-E USB 3.1 and install the TYPE-C on the front of the chassis through the chassis line extension.The type-C reversible design simplifies the connection and allows you to plug in any way without worrying about it being upside-down. Supports data transfer to and from all your USB-C devices at speeds of up to 10Gbps, and delivers 100W power supply.
  • 【HIGH QUALITY TPE MATERIAL FLAT CABLE】TPE material super thin flat cable is very flexible, this material cable can be bent and folded to 180 degrees thousands times without damageIt adopts 16-pin USB3.1 cable and four high-speed signal lines. The use of silver-plated material to reduce the impedance of the conductor, enabling you to enjoy a faster data transfer speed. The shielding layer are braided with high quality tin-plated copper wire, which makes the signal transmission more stable and hig
  • 【EXTENSION USB 3.1 CABLE】 fast charging and superspeed transfer data from your USB A devices by using this cable. This enables you to connect phones, tablets, flash drives, mouse, hubs and other USB C peripherals to your laptops and chargers with normal USB. One side USB C 3.1 protocol for high speed data transfer up to 10Gbps and other functions and delivers 100W power supply.
  • 【SECURE CONNECTION&COMPATIBILITY】Compatible with both USB 3.0 or USB 2.0 devices when both motherboard USB 3.0 & USB 2.0 headers are connected. Motherboard supported - ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G. Connector 1: Type-C Female with Panel. Connector 2: USB 3.1 Front Panel Header.
  • 【DESIGNED TO CONVERT TYPE E INSERT YOUR MOTHERBOARD PCI E PORT】Mounted to the PCI bracket, helps you easily connect the devices with type C interface. it's easy to hook up and install and its just an extension/port so no need to install drivers.
Rank No. #4
cablecc USB 3.1 Front Panel Socket & USB 2.0 to PCI-E Express Card Adapter for Motherboard
  • Connector1: USB 2.0 Socket Connector2: USB 3.1 Front Panel Header
  • The adapter is a converter to convert the available PCI-E of a motherboard into a USB 3.1 header.
  • Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. The compact adapter can be inserted directly and requires no additional attachments.
  • Converter plug-in for the mainboard Fits into any USB 3.0 header Bundling in USB 3.1 with up to 10 GBit / s
  • The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. Thus, two data lines with 5 Gbps each are available, which are bundled into a USB 3.1 header with 10 Gbit / s. The converter thus provides a full-fledged USB 3.1 port.
Rank No. #5
FebSmart PCIE X4 to 2X 10Gbps Max Speed USB 3.1 GEN2 Type E Key A Ports Card, USB 3.1 GEN2 10Gbps Header for Desktop PCs Front Panel USB-C Ports, Built in Self-Powered Technology (FS-E2C-Pro)
  • 1. FebSmart FS-E2C-Pro will allow users add 2X USB 3.1 GEN2 type E key A ports on desktop PCs, Working Stations, and MAC Pros. The 2X USB 3.1 GEN2 type E ports will extend to 2X 10Gbps USB-C ports to PCs front panel. The 2X entended USB-C ports will provide 10Gbps max (16Gbps in total) data tramsfer rate for USB 3.1 GEN2 peripheral devices, such as USB-C NVME SSD enclosure, 10Gbps USB-C hubs, VR-Systems and 4K USB-C video adapters.
  • 2. Built in FebSmart Self-Powered Technology. No need to plug any power cables from PCs PSU, but each USB 3.1 GEN2 port get 5V/3A (5V/6A in total, NOT for fast charging) max power supply. Ensure all connected USB 3.1 GEN2 high power consumption devices running in superspeed plus 10Gbps max. Enjoy super easy installation with Plug & Play use on most desktop PCs.
  • 3. Based on ASMedia ASM3142 the 3rd generation USB 3.1 GEN2 10Gbps host controller. Supports USB 3.1 GEN2 Mutiple INs function, will auto-coordinate each USB 3.1 GEN2 ports banwidth. The added-on Heat-Sink will help PCIE USB 3.1 GEN2 card core components stay away from overheat, make sure USB 3.1 GEN2 devices always stay at peak speed 10Gbps.
  • 4. Compatible System: 1. Plug and Play on Windows 11, 10, 8.x (32/64bit) and Windows Server 2012, 2012R2, 2016, 2019, 2022. 2. Need to install driver on Windows 7 (32/64bit) and Windows Server 2008, 2008R2(32/64bit). 3. Driver Free on MAC OS 10.9.x, 10.10.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and later system. NOT works on MAC OS 10.11. x. 4. Supports most main stream Linux kernels.
  • 5. ATTENTION: 1. PCIE X4 interface design, will compatible with PCIE X4, X8, X16 slot, NOT works on PCIE X1, X2 slot. 2. Please use this PCIE USB card on PCIE 3.0 slot and works with USB 3.1 GEN2 devices or can not get 10Gbps peak speed. 3. Users must make sure PCs have one PCIE X16 slot, before purchase. 4. This is not thunderbolt expansion card, have USB 3.1 GEN2 features only, the USB-C not support ALT+DP function.
Rank No. #6
EZDIY-FAB USB3.1 Gen2 Type-C and 2-Port USB3.0 Type A-5.25 inch Front Panel USB Hub with 20 pin Connector- 73 cm Cable, Metal Front Panel USB Hub
  • Convert an unused 5.25" CD-ROM drive space into 1 USB 3.1 Type-C port 2 USB 3.0 Type A Port
  • Reversible 3.1 USB-C/Type-C connector design (plugs in both ways) allows you to conveniently connect cable in any orientation, Supports any devices with Type-C Header
  • USB 3.1 Front Panel Header to USB-C Type-C Female Extension Port/ Compatible with motherboard with latest TYPE-E connector
  • USB 3. Gen2 Speed Up to 10 Gbps, and to be backwards compatible with USB 3.0/2.0/1.1
  • Operating system compatibility: Windows XP/Vista/Server/7/8/10, Linux
Rank No. #7
JoyReken - USB 3.0 (3.1 Gen 2) Internal (19-Pin) Motherboard Header to Type E Header A-Key 20 Pin Front Panel Adapter for USB Type C Motherboard
  • Widely Compatible: Supports All Motherboards with USB 3.0/ 3.1 19-pin Header.
  • Perfect Solution: for converting the available USB 3.0 header of a motherboard into a USB 3.1 header. The converter thus provides an easy way to access USB-C technology.
  • Connector 1 (Motherboard) : USB 3.0 Internal IDC 19 Pin MB Male Housing Header.
  • Connector 2 (Front Panel) : USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
  • Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components.
SaleRank No. #8
LINKUP - [Active Chip USB 3.0 (3.2 Gen 1) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter
  • Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket.
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2); including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode.
  • Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in an ITX case due to not having enough space. 【LINKUP Cares】 Backed by a LINKUP Limited 1-Year Warranty and Complimentary Premium Online Support.
  • Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components. Not compatible with iPad Pro and other tablets for charging through this port.
SaleRank No. #9
USB C Front Panel Adapter, USB 3.1 (3.1/3.2 Gen 2) Type-E Female to USB 3.0 20Pin Male Header Adapter Extension Card for Type C Motherboard
  • ★【 Advantage 】:USB C header adapter Supports All Computer Motherboards with USB 3.0/ 3.1 19-pin header -(Blue or black socket).Not limited to operating system.
  • ★【 Function】:USB 3.0 19Pin to Type-E 20Pin front panel adapter, the connection is stable.can be extended to PC front pannel USB-C ports.Connect any of your Type C interface devices.
  • ★【Specificationr】: Signal Input--Motherboards USB3.0 IDC 19 PIN Male Connector.Signal Output-- USB 3.1/3.2 Gen 2 Type-E Key A Ports Female Connector.
  • ★【Parameter】: Supports data transfer with USB-C devices at speeds up to 5Gbps. Both sides can be inserted. The maximum voltage is 5V, the current is 0.9A, and the power is 4.5W. PD charging is not supported.
  • ★【Craft】:The high-quality 4-layer PCB circuit design, stable signal, strong anti- interference ability.LED indicating working status, and good connector metal contacts make the product reach a stable working state.
Rank No. #10
Hima USB 3.1 Front Panel hub, Optical Drive 5.25-inch Panel Computer Expansion Board with Key-A ,7 Ports Support Type-C, USB 3.0, USB 2.0, Microphone Input and Audio Output Port for Computer case
  • 【The package includes】: The panel size is 5.25 inches, which is used for the optical drive to expand the chassis. A total of 7 ports, 2xUSB 3.0 port, 2xUSB 2.0 port, 1x Type-C port, 1x HD audio output port, 1x microphone input port.
  • 【Advantages】: The panel is a 3.1-generation panel with a Type-C interface. It has a Key-A cable to connect to the host. The transmission speed is faster than the chip version, and the speed can reach 10Gbps.
  • 【Operating system compatibility】: Windows XP / Vista / Server / 7/8/10, Linux.
  • 【Simple and convenient】: no need to download any driver, no external power supply, positive and negative plug-in, two-way data transmission, safe and efficient.
  • 【Durable】: Reasonable design interface, lightweight galvanized steel plate for anti-oxidation corrosion and longer service life. It has 2 electrical tests before leaving the factory and is guaranteed for one year.

Last update on 2022-09-02 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Usb 3.1 Gen 2 Front Panel?

Do you get stressed out thinking about shopping for a great Usb 3.1 Gen 2 Front Panel? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Usb 3.1 Gen 2 Front Panel, which is why we have assembled a comprehensive list of the greatest Usb 3.1 Gen 2 Front Panel available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Usb 3.1 Gen 2 Front Panel that you consider buying. Your questions might include the following:

  • Is it worth buying an Usb 3.1 Gen 2 Front Panel?
  • What benefits are there with buying an Usb 3.1 Gen 2 Front Panel?
  • What factors deserve consideration when shopping for an effective Usb 3.1 Gen 2 Front Panel?
  • Why is it crucial to invest in any Usb 3.1 Gen 2 Front Panel, much less the best one?
  • Which Usb 3.1 Gen 2 Front Panel are good in the current market?
  • Where can you find information like this about Usb 3.1 Gen 2 Front Panel?

We’re convinced that you likely have far more questions than just these regarding Usb 3.1 Gen 2 Front Panel, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Usb 3.1 Gen 2 Front Panel, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Usb 3.1 Gen 2 Front Panel. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Usb 3.1 Gen 2 Front Panel buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Usb 3.1 Gen 2 Front Panel currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Usb 3.1 Gen 2 Front Panel has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Usb 3.1 Gen 2 Front Panel?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Usb 3.1 Gen 2 Front Panel.
  5. Customer Ratings: Number ratings grade Usb 3.1 Gen 2 Front Panel objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Usb 3.1 Gen 2 Front Panel.
  7. Product Quality: You don’t always get what you pay for with an Usb 3.1 Gen 2 Front Panel, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Usb 3.1 Gen 2 Front Panel is should be an indication of how long it will work out for you.

We always remember that maintaining Usb 3.1 Gen 2 Front Panel information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Usb 3.1 Gen 2 Front Panel is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: