Skip to content

The Best Zooz Zen06 of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Zooz Zen06 of 2022. Check our ranking below.

2,574 Reviews Scanned

SaleRank No. #1
Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More
  • POWERFUL PLUG: The only Z-Wave plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!
  • POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption and S2 authenticated Z-Wave security. NEW: 800 Series Z-Wave chip and Z-Wave Long Range ready. Z-Wave hub required (sold separately).
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure.
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14ยฐ - 104ยฐF, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle.
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave hub for simple on/off control (Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Z-Box Hub (recommended), works with SmartThings (custom driver required, go to Zooz Support Portal for details), Hubitat, Home Assistant, and HomeSeer.
Rank No. #2
Zooz 800 Series Z-Wave Long Range DC Signal Sensor ZEN55 | Z-Wave Hub Required (Sold Separately)
  • ADD Z-WAVE TO SMOKE AND CO ALARMS: Wire the DC Signal Sensor to your interconnected smoke and CO detectors and receive deticated notifications if either of them is triggered. NOTE: This is NOT a security alarm component and the device is NOT part of a life-safety system. Check local regulations before installing. Check Z-Wave compatibility first, this is an advanced device supported by selected hubs only (scroll down for details).
  • OPTIONAL RELAY CONTROL: Utilize the 120 V relay to add smart control of lights or siren as additional functionality. This device comes with SmartStart for quick and secure network inclusion.
  • LONG RANGE READY: If your hub and automation software support Z-Wave Long Range, you'll get extended coverage without network lags and dropouts! And for traditional set-ups, the built-in signal repeater keeps your mesh networks stable and fast.
  • EASY INSTALLATION: Pigtail wires included to save you time when wiring the dimmer for an hassle-free set-up. This product is backed by a lifetime US based support from Zooz and a 5-year warranty once registered.
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with the Z-Box Hub (recommended for Zooz devices), Hubitat with custom driver, Home Assistant (Z-Wave JS), Ezlo, and it's compatible with SmartThings through a custom edge driver (available through the Zooz support portal).
Rank No. #3
Zwave Plug with Energy Monitor 700 Series, Z-Wave Outlet with Overcurrent Protection, Z-Wave Hub Required Work with Wink, SmartThings, Vera, Fibaro & More, FCC & ETL Listed, 1800W
  • ใ€Z-Wave Plug Energy Monitor Compatible with Z-Wave Hub Typeใ€‘ Zwave plug work with SmartThings, Vera, Wink, Fibaro, Homeseer, Hubitat. Zwave smart plug compatible with alexa & google assistant(๐‘๐ž๐ช๐ฎ๐ข๐ซ๐ž๐ฌ ๐š ๐™-๐–๐š๐ฏ๐ž ๐œ๐ž๐ซ๐ญ๐ข๐Ÿ๐ข๐ž๐ ๐ก๐ฎ๐›, sold separately). ๐๐จ๐ญ๐ข๐œ๐ž: ๐‚๐š๐ง๐ง๐จ๐ญ ๐œ๐จ๐ง๐ง๐ž๐œ๐ญ ๐๐ข๐ซ๐ž๐œ๐ญ๐ฅ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐„๐‚๐‡๐Ž ๐๐‹๐”๐’ & ๐•๐ข๐ฏ๐ข๐ง๐ญ ๐ก๐ฎ๐›๏ผ FCC & ETL listed.
  • ใ€Easier Faster Connectionใ€‘ Z-Wave smart plug energy monitor installation takes only 2 minutes, plug the device into zwave plug and connect to the hub to use the zwave plug function. No wiring required.
  • ใ€Zwave Plug with Monitor Energyใ€‘ Z-Wave outlet plug comes equipped with energy monitoring capability. Monitor the power of your home appliances on the App and enjoy a more efficient home.
  • ใ€Voice Control and APP Remote Controlใ€‘ You can use the zwave smart plug app to remotely control the device with voice, like "Alexa, turn on the fan", which will cool you down in the hot summer and enjoy the happiness brought by smart life.
  • ใ€Set Timer & Scheduleใ€‘ Use the zwave smart plug to automatically turn on or off devices such as coffee maker, fans, humidifiers, lights, etc. according to the set time. According to the set time and make your life orderly.
Rank No. #4
Zooz 700 Series Z-Wave Plus On/Off Toggle Switch ZEN73, White | Direct 3-Way (No Add-On Switch Needed) | Z-Wave Hub Required
  • FAST WIRELESS AND LOCAL CONTROL: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately. Smart speakers are NOT Z-Wave hubs). Reports status instantly.
  • NEW SIMPLE DIRECT 3-WAY: Patented solution for 3-way and 4-way installations! No add-on switch needed, no need to rewire the other boxes. Just wire the ZEN73 switch in the box with direct connection to power (it needs to replace an existing 3-way switch) according to the appropriate diagram. Works with mechanical 3-way switches as long as NEUTRAL is present.
  • NEW 700 SERIES MODEL: Just 1.1" deep to easily fit in crowded and shallow boxes. 700 series Z-Wave chip for faster response time and better wireless range boosted by optimal antennae positioning. Remembers and restores on/off status after power failure. Do NOT use as direct replacement for the ZEN23 model in 3-way set-ups, always follow the wiring in the manual.
  • WORKS WITH YOUR HUB! Based on the universal binary switch command class - supported by most Z-Wave controllers (does NOT work directly with smart speakers). Lifetime tech support and 5-year warranty.
  • CHECK YOUR WIRING FIRST: Neutral wire is required to complete installation! Do NOT use the ZEN73 model as direct replacement for the older ZEN23 or ZEN24 switches - they wire differently in multi-point control set-ups, always follow the appropriate diagram or ask Zooz for help.
Rank No. #5
Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required
  • MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
  • 4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click.
  • DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.
Rank No. #6
Zooz 700 Series Z-Wave Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 x NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with Z-Box, SmartThings and Hubitat)
  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels.
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!
  • NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
Rank No. #7
Zooz 700 Series Z-Wave Plus Mesh Network Remote Control & Scene Controller ZEN34 (Battery Powered), White | Z-Wave Hub Required
  • REMOTE CONTROL: Use the paddles like remote control buttons to trigger scenes and turn other smart home devices on or off. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
  • ANYWHERE SWITCH: Install it in a regular switch box or stick it to any flat surface for convenient and wire-free control. This is a battery-powered device with a magnetic base that allows a flexible installation anywhere you always wanted another light switch (no electrician needed!).
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN34 is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.
Rank No. #8
Minoston Z-Wave Plug with Energy Monitoring, Z-Wave Plus Mini Outlet Built-in Repeater Range Extender, Overcurrent Protection, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP21ZP)
  • This Z-Wave smart plug is compatible with those Z-Wave hub: SmartThings, Vera, Fibaro, Homeseer. ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS๏ผZ-Wave Frequency: 908.42MHz. FCC & ETL listed.
  • Energy Efficient: Z-Wave outlet comes equipped with energy monitoring capability. Monitor use and Save on bills. Enjoy a more efficient home.
  • Timer schedule: Control lights and application to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life.
  • Wireless control: A large range of types of load are supported to be wirelessly controlled like lamps or small appliances from anywhere and any time by your mobile devices. Home automation is from a little Z-Wave Plug to control small appliances that you want. Overcurrent protection, when the loading is over 15A, the device wil turn off!
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. Space-saving design leaves the top second outlet free for continued use. Z-Wave Frequency: 908.42MHz.
Rank No. #9
Zooz Z-Wave Plus S2 MultiRelay ZEN16 VER. 2.0 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required
  • 3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control (dry contact only, NO voltage on the input side) or use your Z-Wave hub (required, sold separately) for wireless control and automation. Your smart speaker is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com (R1 control only). Custom edge driver required for SmartThings, go to Zooz support page for details.
  • VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
  • DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!
  • RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant, and on SmartThings with a custom device driver (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays).
Rank No. #10
Zooz Z-Wave Plus S2 Double Switch (White) ZEN30 for Fan and Light Combo (NO Speed Control), Signal Repeater, Hub Required (Works with Hubitat, Wink, SmartThings, Vera)
  • MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.
  • POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).
  • EASY INSTALLATION: Pigtail wires for convenient connections. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

Last update on 2024-02-20 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Zooz Zen06?

Do you get stressed out thinking about shopping for a great Zooz Zen06? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Zooz Zen06, which is why we have assembled a comprehensive list of the greatest Zooz Zen06 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Zooz Zen06 that you consider buying. Your questions might include the following:

  • Is it worth buying an Zooz Zen06?
  • What benefits are there with buying an Zooz Zen06?
  • What factors deserve consideration when shopping for an effective Zooz Zen06?
  • Why is it crucial to invest in any Zooz Zen06, much less the best one?
  • Which Zooz Zen06 are good in the current market?
  • Where can you find information like this about Zooz Zen06?

We’re convinced that you likely have far more questions than just these regarding Zooz Zen06, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Zooz Zen06, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Zooz Zen06. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Zooz Zen06 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Zooz Zen06 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Zooz Zen06 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Zooz Zen06?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Zooz Zen06.
  5. Customer Ratings: Number ratings grade Zooz Zen06 objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Zooz Zen06.
  7. Product Quality: You don’t always get what you pay for with an Zooz Zen06, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Zooz Zen06 is should be an indication of how long it will work out for you.

We always remember that maintaining Zooz Zen06 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Zooz Zen06 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: