18 Best 1.5 Ft Reamer of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best 1.5 Ft Reamer of 2022. Check our ranking below.

2,782 Reviews Scanned

Rank No. #1

Allstar Performance ALL11170 1-1/2' Taper 7.15 Degree Taper Reamer with T-Handle

7.15 Degree taper and has 1-1/2 inch of taper per foot
User to repair or enlarge tapered holes to accept tie rod ends or ball joints
May also be used in a drill with a 1/2 inch chuck by removing the t-handle.
Sold each

Rank No. #2

Drill America-DWRRADJL L High Speed Steel Adjustable Reamer 1-1/2" - 1-13/16", DWR Series

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
Round shank with square end
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

SaleRank No. #3

2-Tool Set H15 Adjustable Hand Reamer with Extension Pilot 1-1/2 in. to 1-13/16 in.

2-Tool set includes H15 Reamer + Extension Pilot

Rank No. #4

H15 (L) Adjustable Hand Reamer 1-1/2" to 1-13/16"

Brand: MACHINE SPARES
H15 (L) Adjustable Hand Reamer 1-1/2inch to 1-13/16inch

Rank No. #5

DAYDOOR 1-1/2'' PVC Pipe Reamer, Plastic Pipe Fitting Reamer, Clean Leftover Pipe & Solvent Cement Residue, Fits into Standard 1/2" Drill, for Use with Sch. 40 PVC, CPVC or ABS Fittings

Save Labor & Materials: The Plastic Pipe Reamer is made to clean out old or broken pipe and leftover solvent cement from a fitting, to complete repairs without needing a new fitting or reworking a complex system. Reduce labor time by using these pvc fitting savers during plumbing work.
Strong PVC Pipe Reamer Tool: These plastic pipe reamers consist of high-quality aluminum alloy body and stainless steel hex key shaft. Carbide cutting insert on socket saver provides a cutting edge on each side. Rotate the socket saver's cutting insert before replacement and receive three additional cutting edges.
Easy to Assemble: Insert shaft into pipe ream body. Make sure the shaft is pushed completely through to the bottom and flush with the bottom of the pipe reamer. Tighten the set screw using an Allen wrench. Use a low RPM drill for the most effective ream.
Widely Used Pipe Reamer Tool: This set of plastic pipe fitting reamers fit into standard ½" drills. Each pvc pipe reamer can be used with standard drills, cordless drills, or impact drills. A great tool for ABS Fittings, CPVC Fittings, Schedule 40 PVC Pipe.
Satisfaction Guarantee: We are committed to providing great satisfaction to our customers. If there are any issues, we will try our best to help and respond in 24 hours.

Rank No. #6

HHIP 2006-0089 1-1/2 to 1-13/16" High Speed Steel Adjustable Blade Reamer, 6 Blades, 14" OAL, Size L

Straight flute reamers should be used in thru-hole applications only
Blades are adjusted by loosening one nut and tightening the other
Reamer expands to the next size
Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool
Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench

Rank No. #7

1” Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 25mm

Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 1" and fit precisely before installing bolts or rivets. This heavy-duty 1" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
Engineered for longevity, our 1" conduit reamer boasts a robust construction using M2 high-speed steel. Its five long tapped right-hand spiral flutes, combined with finely ground edges, enable efficient drilling and debris removal, ensuring reliable performance even under heavy-duty usage.
Precision-driven features – Our 1" reamer bit is meticulously designed for optimal performance. Equipped with a round 3-sided shank, a tapered point, and a safe stop mechanism, it guarantees a reliable grip within the chuck, steady reaming of imperfect holes, and automatic drill stoppage once the hole is finished.
All-in-one solution – With the ability to handle diverse materials such as steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic, and PVC pipes, our 1" reamer drill bit is a versatile tool for woodworking and metalworking projects. From bridge construction and steel erection to automotive truck trailer maintenance, it's the go-to solution.
User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.

Rank No. #8

1.5 Inch PVC Pipe Reamer with 2 Square Carbide Insert, PVC Fitting Saver, Plumbing Tool PVC Socket Saver with Aluminum Alloy Body Stainless Steel Hex Shaft For SCH40 PVC Pipe, PP, PE, CPVC,ABS Pipe

Saving Hassle & Money: This PVC pipe reamer is designed to clear away broken pipes from the solvent welded or threaded fittings for reuse, greatly saving material costs and labor. Suitable for 1-1/2 inch Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, and water pipe. Attention please: not suitable for schedule 80 pipe
Rigid & Durable Material: Engineered from CNC-machined anodized solid aluminum alloy material, not susceptible to corrosion and rust, and long-lasting. Besides, the carbide insert is highly resistant to wear and high temperatures, perfect for boring out cracked pipe effortlessly
Dual Carbide Inserts: Dual carbide inserts help this PVC socket saver stay balanced with less vibration during cutting, easier to control for beginners and greatly speeding up the cutting process. Featuring four-sided cutting edges, each carbide insert allows you to select a brand new cutting edge for optimal cutting performance by rotating it
Electricity-driven: Driven by power drills for maximum efficiency and minimum manpower, this PVC fitting saver can be applied to 1/2’’ standard drills and cordless drills with high torque. Note: DO NOT USE impact drills. Please run the drill at low or medium RPM setting for lower friction heat and cleaner ream
Easy To Operate: Please make sure the reamer is securely tightened before usage. Then install the reamer into the drill chuck firmly and select the low RPM setting. Push the drill straight against the fitting and start drilling centered until totally removing the old pipe and solvent cement residue

Rank No. #9

uxcell Chucking Reamers, 1.5mm H7 Metric Machine Reamer Drill Bit for Metal Wood Hole Reaming, Straight Flute High Speed Steel Tool

Reamer Bit Size: Cutting diameter: 1.5mm / 0.059"; tolerance: H7; cutting flute length: 14mm / 0.551"; shank diameter: 1.4mm / 0.055"; shank length: 22mm / 0.866"; overall length: 47mm / 1.85"; style: straight flute, round shank
Wide Applications: Chucking reamer is designed to accurately enlarge, smooth or finish holes, and is suitable for accurate reaming in stainless steel, aluminum, copper, alloy, plastic, and wood. Widely used in hole repair work, pipe, fittings, and woodworking applications.
Straight Flutes: Allows chips to collect in the flutes, great for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole. Apply a cutting fluid or lubricant to the reamer and workpiece before starting the reaming process.
High Speed Steel: High speed steel (HSS) tool offers high hardness and good toughness for wear resistance, suitable for general purpose applications. With just a base substrate (no additional coating), it is suitable for a wide range of applications.
Tips: Machine reamer is used on lathes, drill presses and screw machines. Lubricant helps reduce friction and heat build-up, extending tool life and improving surface finish. Pay attention to the chips generated when reaming. If chips begin to clog the reamer's chip flutes, cutting performance will be affected.

Rank No. #10

1-1/2 Inch PPR150 PVC Pipe Reamer Clean Ream Extreme with 3/8-Inch Hex Shaft, Meifrenship PVC Fitting Saver, Plumbing Tool Head Aluminum, Pipe Reamer Tool for 1.5" SCH-40 PVC, CPVC & ABS Fittings

✅【1.5 INCH PIPE REAMER】:PPR 150 pipe reamer come with 3/8" hex key shaft,super clean cut, no vibration. 1.5 inch PVC reamer tool is designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.
✅【SHARP CARBIDE INSERT】:PVC reamer features a four-sided carbide insert which provides one extra cutting edge after 90 degree cutting insert rotation.Heavy duty sharp carbide insert is well machined,accurate, durability and long service life, can make an insanely smooth channel.
✅【MONEY-SAVING REAMER】:The cost of PVC piping and solvents has exploded over the past three years, so reusing fittings is a great way to save some cash.In this era of green living and recycling, try the reamer on PVC, CPVC or ABS to save time and material costs.
✅【VERSATILE & EASY TO USE】:The 1-1/2 Inch PPR reamer works great for vent lines, drain lines, and water lines.And can be compatible with standard drills, cordless drills, or impact drills.Whether it's for a pro plumber or for home use, the PPC 150 reamer tool is easy to use.
✅【5-YEAR UNCONDITIONAL WARRANTY】:Receive a full refund or replacement if you’re not completely satisfied. For any questions, please feel free to contact us via EMAIL and we are here ready to help.⚠️NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

SaleRank No. #11

Prime-Line RP77271 Pipe And Tubing Reamer, 1/8 in To 1-5/8 in Diameter, Red (Single Pack)

PIPE AND TUBING REAMER – The Armour Line RP77271 Pipe and Tubing Reamer removes rough edges of tubing; Helps provide a clean working surface prior to assembling tubes
REMOVES BURRS – Removes burrs on tubing 1/8 inch to 1 5/8 inch in diameter
DURABLE PLASTIC BODY– The grooved, durable, plastic body allows for better grip; For use on PVC pipe and copper tubing only
PREPARES TUBING – Prepares tubing for soldering; removing sharp edges
STEEL BLADES – Constructed of long wearing steel blades

Rank No. #12

Kolvoii 1-1/2 Inch PVC Pipe Reamer, PVC Fitting Saver for SCH 40, Plastic Pipe Fitting Reamer, Pipe Reamer Suit for Water Lines, Drain Lines, Vent Lines

【Scope of Application】PVC fitting saver is applicable to exhaust pipe, drain pipe and water pipe, it is used to remove burrs and sharp edges from the inside and outside of PVC pipes after they have been cut, and clean residual pipes and solvent cement residue. Reduce labor time and materials costs by reusing the fittings.
【Carbide Cutting Insert】Carbide is a hard and brittle material, which makes it ideal for cutting through tough materials like pipes. Its hardness allows carbide blades to maintain their sharpness and cutting edge even under high-stress conditions, ensuring consistent and precise reaming.
【Quality Material】Each pvc pipe reamer are crafted from high qulity materail metal, paired with a high-hardness carbide blade, rust-proof and durable. NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.
【Professional customization】 Our pipe reamers are compatible with North American pipe diameters for specific ID/OD reaming jobs. Ideal for PVC, CPVC, and ABS vent, drain, and water lines, as well as other common tubing sizes.
【Warm Tips】Please check if the hex key shaft and carbide insert is locked or not before use; To avoid melting the pvc by keeping the rpm’s low enough to allow the bit to cut; If no chips are being made, remove tool and check. If you have any questions or suggestions, please drop us a line. We will provide you with a satisfactory solution within 24 hours.

SaleRank No. #13

Premium 9Pcs PVC Pipe Reamer - Complete Reamer Set, For 1/2" Drills, Includes PPR50, PPR75, PPR100, PPR125, PPR150, PPR200, PPR250, PPR300, PPR400 (1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4")

Comprehensive 9-Piece Set Design:This PVC pipe reamer kit includes 9 different reamer sizes: PPR50/04652, PPR75/04521, PPR100/04522, PPR125/04523, PPR150/04524, PPR200/04525, PPR250/04532, PPR300/04526, and PPR400/04527. These sizes correspond to 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", and 4", covering a wide range of pipe diameters. This comprehensive set is suitable for various plumbing applications, from minor repairs to major installations.
Compatibility with Standard 1/2" Drills:Designed to fit standard 1/2" drills, each reamer features a 3/8" hex shaft for easy compatibility. Whether you are using a corded, cordless, or impact drill, this kit ensures seamless integration into your toolset, making it ideal for both professional plumbers and DIY enthusiasts.
Precision and Efficiency:Tailored specifically for North American pipe diameters, this reamer kit delivers precise reaming for critical tasks. Made from advanced hard alloy, these reamers provide superior strength, durability, and longevity. The custom design ensures perfect compatibility with pipes and facilitates efficient cleaning by removing residual pipes and cement, thereby saving time and material costs.
Professional's Choice:This 9-piece PVC pipe reamer kit is an essential tool for plumbing professionals. With a full range of sizes, it offers unmatched versatility and convenience for various repair and maintenance tasks. Professionals trust its proven reliability and comprehensive size options to handle any plumbing job with precision and efficiency.
Cost and Time Efficiency:By enabling the cleaning and reuse of existing pipe fittings, this product significantly reduces the need for complete pipeline replacements. This not only saves time and effort but also cuts down on material costs, making it an economical solution for pipe maintenance and repairs.

Rank No. #14

1 1/2" (1.5") Diameter Carbide Tipped Chucking Reamer, Partial Flute Carbide, 55332

8 flutes
12 1/2" overall length
3 1/2" flute length
For General Purpose Reaming, Cutting Diameter Tolerance: +.0003"/-0"
1 1/4" shank diameter

SaleRank No. #15

LifCratms 1/8"-1/2" (3-13mm) T Handle Tapered Reamer, 6 Fluted Chamfer Reaming Tool, Guitar Bridge Pin Hole Handle Tapered Reamers Woodworker Luthier Tool

【What You Will Get】1 x T Handle Tapered Reamer, Diameter: 1/8"-1/2" (3mm-13mm), Taper: 1:10. The T shaped reamer has proper tapers holes, suitable for bridge pins or end pins. The handle is removable, convenient to storage.
【Premium Material】The Bridge Pin Hole Hand Held Reamer is mad of high quality 45# Steel which is a hardened and tempered tool steel, sturdy and durable, rust and corrosion resistant, not easy to deform and break.
【Easy to Use】The 6 Fluted Chamfer Reaming Tool has a removable T handle, provides a leverage for easier reaming, better rotation and greater control. The product with precision ground cutting edges, can help you reaming with little effort.
【Function Well】The T Handle Tapered Reamer with a capacity of 1/8" to 1/2", is a useful tool for removing burrs from wood, plastic, cut pipe, tubing, conduit, wallboard, etc. Also suitable for enlarge bridge pin holes or other holes in guitar.
【100% Risk-Free Shopping】If you have any questions or problems during the purchasing or not satisfied with the product, please feel free to contact us via Amazon email, we will try our best to give you a satisfied solution. Please rest assured to order, we wish you a happy shopping experience.

Rank No. #16

Fancemot PVC Pipe Reamer Tool with 1/2 Inch, 1 Inch, 1-1/2 Inch, 2 Inch, 3 Inch Head, PVC Fitting Saver Fits 1/2'' Drill, PVC Pipe Reamer for Removing SCH 40 from Hub (5 Packs)

【Comprehensive Set】Our PVC Fitting Saver Kit includes 5 sizes (1/2", 1", 1-1/2", 2", 3") to ensure compatibility with a variety of PVC pipe calibers commonly used at home. This kit provides all the necessary tools for your projects.
【Compatible Design】Designed to attach to your 1/2" variable speed power drill, this PVC pipe reamer is a perfect addition to your plumbing toolkit.
【Multi-Functionality】The PVC pipe reamer tool is versatile, designed to remove schedule 40 plastic pipes from a hub, cut ABS or PVC DWV pipes below the slab, and easily remove broken pipes from hubs without requiring expensive replacements.
【Durable Material】Constructed from high-quality stainless steel, our pipe reamer is built to last. It resists breaking or fading, ensuring durability and longevity even with heavy use.
【Time and Effort Saver】Save time and money with our PVC fitting saver. Instead of replacing the entire pipe, simply remove the damaged parts. The PVC pipe reamer speeds up project completion, making it faster and more efficient.

Rank No. #17

Rannb Adjustable Hand Reamer Square End Blade Reamer Adjustment Range 23mm - 26mm/29/32" - 1-1/32"

Material-The Adjustable Reamer is made of premium HSS with good hardness and toughness.
Square End-Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
How to Adjust-Blades are adjusted by loosening one nut and tightening the other.
Adjustment Range-23mm - 26mm/29/32" - 1-1/32"; After reaming the hole can get the exact size and shape.
Applicable Material-A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.

Rank No. #18

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe
Compatibility: PVC fitting saver come with hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90° for new cutting surface before use, the cutting efficiency is higher and faster
Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness
Note: It is recommended to use a variable-speed electric drill with low-speed cutting; Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending

How Do You Buy The Best 1.5 Ft Reamer?

Do you get stressed out thinking about shopping for a great 1.5 Ft Reamer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 1.5 Ft Reamer, which is why we have assembled a comprehensive list of the greatest 1.5 Ft Reamer available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 1.5 Ft Reamer that you consider buying. Your questions might include the following:

Is it worth buying an 1.5 Ft Reamer?
What benefits are there with buying an 1.5 Ft Reamer?
What factors deserve consideration when shopping for an effective 1.5 Ft Reamer?
Why is it crucial to invest in any 1.5 Ft Reamer, much less the best one?
Which 1.5 Ft Reamer are good in the current market?
Where can you find information like this about 1.5 Ft Reamer?

We’re convinced that you likely have far more questions than just these regarding 1.5 Ft Reamer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 1.5 Ft Reamer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 1.5 Ft Reamer. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 1.5 Ft Reamer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 1.5 Ft Reamer currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 1.5 Ft Reamer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 1.5 Ft Reamer?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 1.5 Ft Reamer.
Customer Ratings: Number ratings grade 1.5 Ft Reamer objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 1.5 Ft Reamer.
Product Quality: You don’t always get what you pay for with an 1.5 Ft Reamer, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 1.5 Ft Reamer is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 1.5 Ft Reamer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 1.5 Ft Reamer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best 1.5 Ft Reamer of 2022 – Romance University

How Do You Buy The Best 1.5 Ft Reamer?

Related Post: