18 Best 4X4 Post Support Flange Handrail Support of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best 4X4 Post Support Flange Handrail Support of 2022. Check our ranking below.
2,136 Reviews Scanned
- ▼ Please read full description before order. ▼ Perfect for deck supports, porch railing, hand rails and post holders. Also, can be used as table leg / mailbox post support brackets.
- ▼ Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market). ▼ Sanding / trimming may be required depending on post type and little size error.★ POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ★
- ▼ Made from paintable durable High-Strength Nylon + Anti-UV + FRP (Fiber Reinforced Plastic). NO fading, aging, and weakening from sun exposure. UV-resistant.
- ▼ Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board. ▼ Thicker & higher post base bottom for better structural strength on decks.
- ▼ Clean contemporary style. Re-designed for better looking. Fast & easy post installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match looking. (search "PNP 115445" and "PNP111902" )
- Attaches wooden 4x4 posts (Actual 3.5x3.5) to deck surfaces (screws not included)
- Engineered for strength and quality. Engineered for strength and quality. Our products are not injection molding they are forged plastic which is stronger but may have an irregular surface
- uses: deck supports, porch railing, hand rails, post holder and also as table leg NOT for roof support
- Professional Version READ CAREFULLY AS TRIMMING POSTS MAY BE REQUIRE - Pro Version - SCREWS NOT INCLUDED so as to provide more fastener choices
- ATTENTION: PLEASE UNDERSTAND POST SIZE AND USE FULLY 3.5"x3.5" - Perfect for deck supports, porch railing, post holders. Also, can be used as table leg. - Professional Version READ CAREFULLY AS TRIMMING POSTS MAY BE REQUIRED -
- Perfect for deck supports, porch railing, hand rails and post holders. Also, can be used as table leg or mailbox support 3.5 inches x 3.5 inches (commonly called 4x4)4x4)
- Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post). - Sanding / trimming may be required depending on post type..- POST HEIGHT LIMIT: 42", NOT for roof or overhead support = UV protected for years of durability.
- We live and work in Ukiah, CA and Holly, Michigan and we provide 100% Satisfaction and will jump through hoops for you at all times... Just please let us know of anything we can help with.. It is users responsibility to adhere to local and state building codes. This product may not be acceptable in certain areas. Check your building codes. Use for Ground Floor Decking Only.
- Attaches wooden 4x4 posts (Actual 3.5x3.5) to deck surfaces (screws not included)
- Engineered for strength and quality. Our products are not injection molding they are forged plastic which is stronger but may have an irregular surface
- uses: deck supports, porch railing, hand rails, post holder and also as table leg NOT for roof support
- Actual square inside size:3.5 x 3.5inch(89 x89mm),Size error:±1mm;it applies to nominal standard 4"x 4" wooden posts (actual 3.5"x 3.5" on market);
- ▼ Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market). ▼ Sanding / trimming on wood posts might be required if size error. ★ POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ★
- ▼ Perfect for deck posts, porch, baluster / cable railings, hand rails, pergolas, pavilion, cabin. Also, can be used as table leg / mailbox post support brackets. ▼ Reinforced corners ribs. No worries of edge-breaking and bending.
- ▼ Made of premium die-casting aluminum # ADC12 + powder-coated with AAMA-2604 compliant material (Five times the outdoor exposure and twice the humidity exposure as AAMA-2603). UV-resistant, rust-proof and durable.
- ▼ Stainless Steel screws (Hardness class #12.9 + Dacromet black coating) are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board. ▼ Thickened walls & pads on bottom for better structural strength on decks.
- ▼ Clean contemporary style. Re-designed for unique looking. Fast & easy post installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match looking. (search "PNP 115445" and "PNP111902")
- 4 x 4 POSTS: Actual 3.5x 3.5 inches deck post base. Used for deck posts, porches, railings, handrails, gazebos. Can also be used as a support frame for table legs/mailbox posts. (May need to be modified to better fit the size you need)
- ELABORATE DESIGN: The four-cornered curved design of the 4x4 post base adds stability to the post and is more modern and beautiful. Each hole in the post is pre-drilled and has a delicate wrap-around edge.Thicker & higher post base bottom for better structural strength on decks.
- DURABLE AND RUST-PROOF: Made of high quality plastic, the surface is black anti-corrosion powder coating material. Effectively resists UV rays, rust-proof and durable.
- COMPLETE KIT: Includes screws and 4 posts. The short screws can be mounted horizontally to the posts and the long screws can be mounted vertically to the deck substrate.
- EASY TO INSTALL: Quick and easy 4x4 post anchors installation in minutes.
- HEAVY DUTY – Fence post support made of high strength cast aluminum, practical sturdy and durable, provide a solid base for your fence posts.
- RUST RESISTANT – The post support fence itself and all screws and fixings are also rust resistant for a long life.
- EASY INSTALLATION – All fixing screws are included and all holes are predrilled. Fence brackets for concrete posts come with 8 stainless steel screws. This fence support stake allows easy installation of wood posts on existing concrete.
- SPECIFICATIONS – Post floor sleeve size, L: 40mm x W: 40mm x H: 32mm. Base Plate Dimensions: 90 mm x 47 mm. Hole distance: 67 mm. Material thickness: 3 mm. Color: Silver.
- WIDE APPLICATION –Post base cover skirt flange for connecting beams or other wooden parts to concrete surfaces. The deck base post ensures a stable construction between wood and concrete. The post shoe base plate can be used for wooden post of deck cable railing, fence, handrail railing, deck, pergolas, pavilion, log cabin and so on.
- Material:304 Stainless Steel,Black finish;
- Actual inside size:3.58×3.58inch(91×91mm);
- This package come with 16 Pcs 5/16" hex screws and 32 Pcs 3/16" screws,all the screws are made of stainless steel and can only apply to wood base;
- Note: 4x4 wood post’s actual size depends on the wood type and dryness. We made inner diameter 3.5x3.5inch square anchor base according to the genral size of wood. We believe in very rare cases post actual size is larger than 3.5inch. In this case, we can try sanding and triming the wood post, to match with the inner size of the post base.But if we made the post base size over larger than 3.5inch, there will be a gap between wood post and the base, which is difficult to fix.
- Complete Accessories: You will get 4 PCS expansion screws and 8 PCS screws, which can to meet installation requirements. You don't need to spend extra money to buy accessories.
- Product Size: The internal size of the fence post base is 3.7 x 3.7 inches.
- Sturdy and Stable: The post bracket is adopting 2 mm thick steel plate with powder coating process. It can keep the fence post anchor from corrosion and rust-proof, with excellent stability.
- Easy to Install: You just need to use the wrench to tighten the screws.
- Wide Range of Uses: The deck post anchor is suitable for deck post support bracket, porch railing support, fence post base, hand rails support, table leg and so on.
- HEAVY DUTY STEEL MATERIAL - Made of high quality steel material with a black coated finish that makes fence post base corrosion-resistant and rust-resistant, and the octagonal bracket provides exceptional stability and durability for indoors and outdoors support use.
- EASY TO INSTALL IN CONCRETE - There are 4 pcs wood post base bracket, each with an internal size of 3.9 x 3.9 x 3.9 inches, equipped with 16pcs expansion screws and 32 pcs black screws for quick and easy installation. Easy to install and fit in the concrete perfectly.
- STURDY SUPPORT& GREAT PROTECTION - Our 4x4 wood post base can not only provide stable support for the railings, the classic black is stain-resistant, finish looks great so that the guardrails will always look new and extend their life.
- USED IN MANY OCCASIONS - This post support base can be used as column support frame, porch railing support, fence post base, handrail support, etc. in various places such as backyard, garden, park, terrace, river bank, etc., making your surroundings more brand new and safer.
- SATISFYING SHOPPING - We HAKZEON store promises to provide you with a 100% refund guarantee, so that you enjoy a satisfactory shopping experience. If you have any product questions with our post base concrete, please feel free to contact us, and we will be dedicated to your service.
- Ideal for securing and stabilizing a nominal 4" x 4" post to a wood post or surface
- Classic black and minimal in design, our post plate connector is designed for utility and to be a well-hidden and functional part of your outdoor project
- Designed to help with the installation of posts for any of your lightweight projects.
- Pre-drilled holes make aligning and attaching fasteners easy, eliminate the need for toenailing and prevent you from damaging your material
- For use with #14 fasteners (required fasteners sold separately and vary by material and project)
- Pre-drilled Nylon Material -- Made of high quality nylon that will never corrode or break. Thickness up to 3cm, Eapele railing connectors create a strong and effective support to the deck rail.
- Eapele 90 Degree Railing Connector makes attaching 2" X 4"(true measurement of 1-3/8" x 3-3/8") or 2" X 6" (true measurement of 1-1/2" x 5-3/8")railings to posts quick and easy. Makes for a super easy install of railings, even stair railings.
- Package Included -- 20pcs deck rail bracket connectors,120pcs black coating Iron screws.
- Note -- The material of these connectors are nylon, so take care in screwing them in. When you use the square drive bit, please set your driver to the lowest torque. Do that, and you'll be fine.
- If you find that there are not enough parts,just contact us through amazon message system, we will send you the parts as oon as possible.
- Strong and Sturdy -- Cut from 13GA thick top-notch metal. Black powder paint for rust-resistant to go through the entire summer of heat and rain.Sturdy enough to support the bottom of your post.
- Screws and anchors supplied -- Come with 4pcs expansion anchors for concrete floor,4pcs external hex wood screws for wood floor,8pcs Phillips bugle head self-tapping screws for 4x4 post securing. Fixed on a wooden floor or concrete floor, you have your choice.
- Use with 4x 4 post -- Fits a nominal standard 4x4 post (actual 3.5"x 3.5" dry post on market).High up to 5-1/2”, firmly anchored to your concrete slab without problem. Come with 5/8" expansion bolts; suggest using #51 drill bit.
- Universal design -- Perfect for deck supports, porch railing, handrails and post holders. Also, can be used as table leg/mailbox post support brackets.
- Eapele fence post anchor brackets covered in an 18months warranty. If you have any concerns, just contact us on Amazon. We will always be there.
- [No More Back-Breaking Work]: Use the BISupply 4x4 Fence Post Anchors Metal Post Bracket Base 1 Pack to easily install 4 x 4-inch (10 x 10 cm) wood posts without inserting in ground
- [Use Your Posts]: Fits standard 4 x 4-inch posts; 3.6 x 3.6-inch (9.1 x 9.1 cm) true dimensions with screws on one side to allow the wood post anchor opening to be large enough to insert your 4x4 and then tighten to hold firmly
- [Anywhere Posts are Needed]: For deck hand railing, pergola, fence, sign, garden fence, and similar posts up to 4 feet (1.2 m) high; Post holder stands 5.4 inches (13.7 cm) tall with 5.9 x 5.9-inch (15 x 15 cm) base plate
- [Install Easily]: Insert your post into this square post anchor support; Tighten post base around your post with included hardware; Optionally use the (4) 7/16-inch (11 mm) base predrilled holes that stand 4.75 inches (12.1 cm) apart (center to center) to bolt down on your flat surface
- [Package Contents]: Fence anchors package includes 1 individual 4x4 ground anchor post base with 2 tightening screws with locking nuts; Wooden posts and bolt down screws not included
- FIT FOR 4X4INCH POST BASE---Actual internal size is 3.6inchx3.6inch, suitable for a 4x4inch post base (3.5x3.5inch post on the market), allowing the wooden post to be embedded and then tightened firmly. Quantity: 3pcs, total weight: 3.5kg
- FIRM AND DURABLE---2mm thick steel surface, powder-coating treatment, more stable and durable in structure, beautiful and anti-corrosion
- STRONG STABILITY---There are reserved holes on both sides of the fence base, can be fixed with 8 self-tapping screws to prevent the post from shaking
- EASY TO INSTALL---Come with 24 self-tapping screws and 12 expansion screws, a wrench, you no need to purchase, just put the wooden post into the support base, and fix the screws on the wood and On the concrete floor
- MULTI-FUNCTIONAL APPLICATION---The post bracket is very suitable for decorating courtyard fences, decks, park fences, etc., and is more durable to avoid damage
- Sturdy Post Base: The size of the 5 PCS post support flange is 6.02 x 3.62 x 2.64". The deck post skirt is made of 1.5 mm steel with a powder coating on the surface, protecting the decking post base from corrosion.
- Use For 4 X 4" Post: The peak post anchor's internal size is 3.38 x 3.38", which is suitable for 4 x 4" posts. The standard size can ensure that the deck post will not sway.
- Easy To Assemble: It's easy to assemble the post support base bracket and convenient to use. You can install the deck base brackets only by fastening the screws. It's effortless and labor-saving.
- Complete Accessories: All the needed screws are included in the accessories. You only need to assemble the deck base brackets on the wooden deck or concrete floor.
- Universal Applications: We can install the post cover on the wooden deck to make it more secure, or some other goods, such as deck brackets, porch railings, post holders, table legs, etc.
- FIRM AND STEADY---Item size: 6.4 x 3.6 x 5.4"(LxWxH); Quantity: 3 Pcs; The post base is made of 2.0 mm thick steel, plated with black powder. It can prevent the post anchor from rusting, which is stable enough to support the bottom of the post and improve its service life.
- 4x4 POST BASE---Inner diameter of the post bracket is 3.6 x 3.6 inches. The post base is used for 4x4 wood posts (actual 3.5"x 3.5" dry post on market). Attention: Before you buy it, please confirm the size of wood post.
- EASY TO INSTALL---Concise manual is offered. Each post base bracket has eight holes on the body and four holes on the bottom. You can easily use the bolts and screws we provided to install the 4x4 brackets in concrete with 0. 5" diameter anchors.
- ADEQUATE ACCESSORIES---A wrench, 12 x 3/8 Expansion Bolt and 24 x Self-tapping Screws are supplied. They are enough to fix the post base. So you do not need to buy other accessories.
- APPLICABLE SCENARIOS---Our post bases are specially designed for porches, pavilions, decks, mailboxes, fences and railings, etc. Their solid quality can do what they can do.
- Stable Post Base: The size of the 10 PCS post support flange is 6.02 x 3.62 x 2.64". The deck post skirt is made of 1.5 mm steel with a powder coating on the surface, protecting the decking post base from corrosion.
- Fit For 4 X 4" Post: The peak post anchor's internal size is 3.38 x 3.38", which is suitable for 4 x 4" posts. The standard size can ensure that the deck post will not sway.
- Easy To Install: It's easy to assemble the post support base bracket and convenient to use. You can install the deck base brackets only by fastening the screws. It's effortless and labor-saving.
- Complete Accessories: All the needed screws are included in the accessories. You only need to assemble the deck base brackets on the wooden deck or concrete floor.
- Wide Applications: We can install the post cover on the wooden deck to make it more secure, or some other goods, such as deck brackets, porch railings, post holders, table legs, etc.
How Do You Buy The Best 4X4 Post Support Flange Handrail Support?
Do you get stressed out thinking about shopping for a great 4X4 Post Support Flange Handrail Support? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 4X4 Post Support Flange Handrail Support, which is why we have assembled a comprehensive list of the greatest 4X4 Post Support Flange Handrail Support available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 4X4 Post Support Flange Handrail Support that you consider buying. Your questions might include the following:
- Is it worth buying an 4X4 Post Support Flange Handrail Support?
- What benefits are there with buying an 4X4 Post Support Flange Handrail Support?
- What factors deserve consideration when shopping for an effective 4X4 Post Support Flange Handrail Support?
- Why is it crucial to invest in any 4X4 Post Support Flange Handrail Support, much less the best one?
- Which 4X4 Post Support Flange Handrail Support are good in the current market?
- Where can you find information like this about 4X4 Post Support Flange Handrail Support?
We’re convinced that you likely have far more questions than just these regarding 4X4 Post Support Flange Handrail Support, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 4X4 Post Support Flange Handrail Support, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 4X4 Post Support Flange Handrail Support. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an 4X4 Post Support Flange Handrail Support buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 4X4 Post Support Flange Handrail Support currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 4X4 Post Support Flange Handrail Support has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 4X4 Post Support Flange Handrail Support?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 4X4 Post Support Flange Handrail Support.
- Customer Ratings: Number ratings grade 4X4 Post Support Flange Handrail Support objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 4X4 Post Support Flange Handrail Support.
- Product Quality: You don’t always get what you pay for with an 4X4 Post Support Flange Handrail Support, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 4X4 Post Support Flange Handrail Support is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining 4X4 Post Support Flange Handrail Support information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 4X4 Post Support Flange Handrail Support is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.