18 Best Bora Centipede Risers of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Bora Centipede Risers of 2022. Check our ranking below.
2,651 Reviews Scanned
Rank No. #1
BORA Centipede 6-Piece Risers Set, Accessory for BORA Centipede Work Stands, Increase Working Height, CA0506, Orange
- Adds 6-inches to working height
- Risers give you a 36-inch work height on your Bora Centipede work stand
- Easy to install - 5 minutes
- Ideal to raise workbench to comfortably read plans or a standing desk that is portable
- Increased height does not decrease load capacity
Rank No. #2
BORA Centipede 9-Piece Risers, 2-Piece Hooks Set with Accessory Bag for BORA Centipede Work Stands, CB0912K
- Risers add 6-inches to the working height of your BORA Centipede work stand
- Increased height does not decrease load capacity
- Hooks keep tools out of the way yet close at hand
- Easy installation – slip in the risers and slide the hooks up through the p-top (sold separately), rotate and drop in
- Designed for use with all BORA Centipede work stands: CK6S, CK9S, CK12S, CK15S, CT6, CT9, CT10, CT12, CT15
Rank No. #3
Bora Centipede Work Stand Compatible Riser Kit - Table Height Increaser Accessories for Sawhorse - 6x Risers. 6x Non-Slip Grips and 2xTool Storage Hooks for Workshop Table CAK2015
- Includes 6 Risers, 6 Non-Slips, and 2 Hooks
- Compatible with all sizes of the BORA Centipede Workstands
- Non-Slips are a low-profile solution for holding materials in place
- Risers add 6-inches to working height
- Easily hang tools on the side of your stand when not in use with the hooks
SaleRank No. #4
BORA Centipede 2x4 Support Bracket 4-Piece Set for BORA Centipede Workstands, CA0204
- Fits standard 2x4 boards
- Allows for quick cuts without clamping
- Designed for use with all BORA Centipede work stands: CK6S, CK9S, CK12S, CK15S, CT6, CT9, CT10, CT12, CT15
- Fits standard 3/4 in. bench dog holes
SaleRank No. #5
BORA Wide Panel Supports, Centipede Workbench Accessory, Holds Material Firmly While Cutting, 4-Pack, CA0804
- Centipede Accessory: BORA’s line of Centipede products allows you to focus on your work without adding any extra stress on your shoulders. Each Centipede Wide Panel platform helps hold your project securely and is compatible with all sizes of the BORA Centipede work stands.
- Non Skid Surface: The large 9” x 2.75” non-slip panel grips material firmly in place during and after cutting, so your pieces stay where you need them and don’t fall into the Centipede struts
- Swivel Capability: Rotate each wide panel support up to 360 degrees to support your material exactly where you need it
- Quick Set-Up: Each panel support has a 3/4-inch post that fits perfectly into the struts on top of your Centipede P-Top, just drop them in and you’re ready to go
- Built To Last: Like the Centipede work stands the BORA Centipede Panel Supports can handle project after project, with durability that far outlasts the competition
Rank No. #6
BORA Centipede Workbench Table Top + Bora Centipede 6-Piece Risers Set
- The Centipede Workbench Tabletop (product 1) has 20mm dog holes spaced evenly across the surface with a pattern of 96mm on center. Compatible with any 20mm dog hole accessories.
- The tabletop (product 1) is hinged in the center for easy transport and storage, and has a carrying slot to hold it in one hand while keeping the other hand free.
- The 6-Piece Risers Set (product 2) adds 6-inches to the working height of the Bora Centipede work stand, giving you a 36-inch work height.
- The increased height due to the risers (product 2) does not decrease the load capacity of the work stand.
- Package includes 1 Centipede Tabletop (product 1) plus 6 quick-twist lock handles. Set up instructions are printed on the box.
SaleRank No. #7
Bora Centipede Workbench Table Top for Bora Centipede Work Stand Saw Horses - 24" x 48" & Centipede 6-Piece Risers Set, Accessory for Bora Centipede Work Stands, Orange
- Product 1: ULTIMATE WORKSTATION: Whether you’re moving from one worksite to the next, or doing a DIY project in your garage or on your driveway, this portable, folding Centipede tabletop makes it simple to set up and tear down.
- Product 1: TOP IT OFF: The CK22T Centipede Tabletop works with all Centipede Stands, as well as the Centipede 2x4” Bracket, Quick Clamp, and Non-Slip accessories. Full dimensions are 24" x 48" (610 mm x 1200 mm), and it can support up to 2000 lbs (907 kg).
- Product 1: WORKBENCH STYLE TOP: The Centipede Workbench Tabletop has ¾ inch dog holes spaced evenly across the surface and is compatible with standard Workbench dog hole accessories.
- Product 1: EASY TRANSPORT: The tabletop is hinged in the center for easy transport and storage, and has a carrying slot so you can hold it in one hand while keeping your other hand free.
- Product 2: Adds 6-inches to working height
Rank No. #8
BORA Centipede Panel Cutting Accessory Kit for BORA Centipede Workstands, CAK2017
- Includes 4 X-Cups, 4 Quick Clamps, 6 Non-Slips, 2 Hooks
- All accessories fit in standard 3/4 in bench dog holes and are compatible with all sizes of the BORA Centipede work stands: CK6S, CK9S, CK12S, CK15S, CT6, CT9, CT10, CT12, and CT15
- X-cups are for quick setup for traditional sawhorse applications
- Quick Clamps keep your materials securely held in place when inserted into the P-Top on your Bora Centipede work stand
- Non slips are a low profile solution for holding materials in place
Rank No. #9
Antho3D 4-Pack Double P-Tops Accessory – Designed with The Bora Type Centipede-Style Work Stand in Mind
- Enhance your Centipede-style work stand with Antho3D’s 4-piece Double P-Tops Accessory Set, designed to improve tool organization and accessory flexibility on the jobsite or in your workshop. Expanded Accessory Mounting: Each Double P-Top features an extra mounting point, allowing you to attach multiple accessories—such as X-Cups or tool hooks (not included)—in a single location. Tool-Free Installation: Attaches just like standard P-Tops—no additional tools or fasteners required for setup. Swivel Adjustment: Each piece rotates to help you position accessories exactly where you need them.
- Optimize Your Workspace: Keep your tools and attachments more accessible and organized with minimal workspace interference. This particular component is not a Bora-manufactured item; however, it is purposefully crafted to perfectly complement and operate in conjunction with Bora type Centipede-Style Work Stand, ensuring a harmonious and efficient integration within the system.
- The Power of 3D Printing: This item is born out of modern 3D printing technology, constructing each piece layer by layer. You might notice minor variations like visible lines or small bumps, a unique characteristic of this innovative process. Rest assured, every image represents the actual product, and each item undergoes a rigorous quality check. Durable 3D Printed Construction: Made in the USA, this is 3D printed using high-quality materials, ensuring long-lasting use. Note: Minor imperfections are normal due to the nature of 3D printing.
- Military veterans proudly own and manage a business dedicated to crafting products solely within the United States. These goods are meticulously manufactured in a factory using precise manufacturing techniques.
SaleRank No. #10
Bora Centipede Workbench Table Top For Bora Centipede Work Stand Saw Horses - 24" x 48" - Includes Wood Top with 3/4" Dog Holes + 6 Quick-Twist Lock Handles for Portable, Temporary Work Bench, CK22T
- ULTIMATE WORKSTATION: Whether you’re moving from one worksite to the next, or doing a DIY project in your garage or on your driveway, this portable, folding Centipede tabletop makes it simple to set up and tear down.
- TOP IT OFF: The CK22T Centipede Tabletop works with all Centipede Stands, as well as the Centipede 2x4” Bracket, Quick Clamp, and Non-Slip accessories. Full dimensions are 24" x 48" (610 mm x 1200 mm), and it can support up to 2000 lbs (907 kg).
- WORKBENCH STYLE TOP: The Centipede Workbench Tabletop has ¾ inch dog holes spaced evenly across the surface and is compatible with standard Workbench dog hole accessories.
- EASY TRANSPORT: The tabletop is hinged in the center for easy transport and storage, and has a carrying slot so you can hold it in one hand while keeping your other hand free.
- PACKAGE CONTENTS: Package includes 1 Centipede Tabletop plus 6 quick-twist lock handles. Set up instructions are clearly printed on the box along with images.
Rank No. #11
BORA Centipede 3 Piece P-Tops Set, CA0103, Accessory for BORA Centipede Work Stands
- Protects load, cutting blade and struts from damage
- Standard 3/4″ nut (Included) for easy replacement
- Spins 360° for convenient positioning of other Bora Centipede accessories
- Works on all Bora centipede work stands ( CK6S, CK9S, CK12S, CK15S)
- Set includes 3 pieces
Rank No. #12
Bora Centipede CK6S 30 inch Height Portable Work Stand & Workbench Table Top for Saw Horses & 6-Piece Risers Set, Orange
- Product 1: Saw-Horse Solution - Made Of Heavy Duty Steel Construction, The Centipede Is A Fold-Able Work Stand That Can Be Set Up As A Large Portable Workbench At Any Job Site
- Product 1: Complete Kit- The Full Set Comes With The Following Accessories: 2 Quick Clamps To Keep Your Materials Firmly In Place, 4 X-Shaped Brackets Which Hold Standard 2X4 Boards Steady, And A Sturdy Carry Bag
- Product 1: Perfect Working Height - The Working Height Is 30 Inches Tall: Large Enough To Lay A 4Ft X 8Ft Wood Board On Top. It’S Expandable By Simply Adding Risers (Not Included) To Increase The Working Height And It Supports Up To 2, 500 Pounds Of Power Tools And Machinery
- Product 2: ULTIMATE WORKSTATION: Whether you’re moving from one worksite to the next, or doing a DIY project in your garage or on your driveway, this portable, folding Centipede tabletop makes it simple to set up and tear down.
- Product 2: TOP IT OFF: The CK22T Centipede Tabletop works with all Centipede Stands, as well as the Centipede 2x4” Bracket, Quick Clamp, and Non-Slip accessories. Full dimensions are 24" x 48" (610 mm x 1200 mm), and it can support up to 2000 lbs (907 kg).
Rank No. #13
BORA Centipede 2-Piece Quick Clamps Set, CA0302, Clamp Accessory for BORA Centipede Work Stands
- Secure table tops/bench tops quickly, without tools
- Hold boards in place during cuts
- Soft over mold stem provides maximum Wedge tension to securely hold boards in place while you are cutting
- Designed for Bora Centipede work stands (CK6S, CK9S, CK12S, CK15S)
- Set includes 2 quick Clamps
Rank No. #14
BORA Centipede 2 Piece Hooks Set Centipede Work Stands, CA0402
- Keep tools out of the way and close at hand
- Easy installation – slide up through p-top (sold separately), rotate and drop in
- Carries heavy weight with sufficient load on the unit
- Designed for Bora Centipede work stands ( CK4S, CK6S, CK9S, CK15S)
- Fits in standard 3/4 in. bench dog holes
SaleRank No. #15
BORA Centipede CK12S 30 inch height Portable Work Stand, Includes 4 X-Cups, 4 Quick Clamps, Carry Bag, Portable Work Support Sawhorse, 4Ft x 6Ft, 30 inch work height, 4500lb weight capacity
- Quick Setup: Set up your collapsible table in a matter of seconds! This garage workbench comes with a carry bag so this mobile workbench can be brought anywhere. Collapsible table on the go
- Heavy Duty Table: Engineered with 12 flexible steel struts, this table saw stand absorbs impact from heavy machinery and tools while using it as portable saw table and work table for garage
- Surface Friendly Design: Equipped with P-Tops at each contact point, this portable workbench protects your projects from marks and prevents saw blade damage to the struts. They're in good hands.
- Versatile Workspace: The 360-degree rotating P-Tops are compatible with all Centipede accessories, allowing you to expand your portable work table depending on what your construction tools require.
- Customizable Work Table Support: Pair the Centipede CK12S with the CK22T Workbench Tabletop. This makes the foldable workbench a versatile and flexible workstation tailored to your needs.
Rank No. #16
BORA Centipede CK9S 30 inch Portable Work Stand Bundle with 6-Piece Risers Set
- The Centipede work stand provides a sturdy, foldable workbench that can be set up at any job site with a working height of 30 inches (36 inches with risers) and weight capacity of 3,500 lbs.
- The bundle includes a carry bag for the work stand, 4 quick clamps to hold materials firmly in place, 4 X-cups to hold 2x4 boards steady and a 6-piece risers set to increase the working height.
- The Centipede work stand is available in 4 sizes - CK6S, CK9S, CK12S and CK15S to choose from based on the weight capacity and ability to complete 2 jobs at once.
- The risers add 6 inches to the working height of the Centipede work stand, making it easier to read plans and can also be used to raise a portable standing desk.
Rank No. #17
BORA Centipede Folding T-Track Table Top Centipede Work Stand Saw Horses - 24 Inch x 48 Inch 20mm Dog Holes - Includes Wood Top + 6 Quick-Twist Locks for a Portable, Quick Setup, CK24TM
- Full dimensions 24" x 48" (610 mm x 1200 mm) – same size as the 4'x2' Centipede Workstand
- Hinged in the middle for easy transport and storage
- Carrying slot allows you to carry the tabletop in one hand and your Centipede workstand in its bag
- 20mm dog holes evenly spaced across the surface
- Works with Centipede X-Cup Bracket, Quick Clamp, and Non-Slip accessories
SaleRank No. #18
BORA Centipede CT12 36 inch Tall Portable Folding Workstand with Carry Strap, Collapsible Workbench, Construction Table, Support, Sawhorse, 4Ft X 6Ft, 36 inch Work Height, 4500lb Weight Capacity
- Quick Setup: Set up your collapsible table in a matter of seconds! This portable work bench comes with a carry strap so this mobile workbench can be brought anywhere and setup easily.
- Heavy Duty Woodworking Table: Engineered with 12 steel struts, this table saw stand works with heavy machinery and tools while using it as portable saw table and work table for garage.
- Take It Anywhere: This folding work table can easily be transported. With the built-in carry strap, you can easily transport your workbench from one place to another.
- Versatile Workspace: The Centipede foldable work table is one of the most flexible workbenches and can be used for woodworking, building, cutting, and more. It's a great multi-use portable work table.
- Customizable Work Table Support: The BORA Centipede CT12 is a portable stand workstation that works with a range of accessories (sold separately) to further improve your workspace.
How Do You Buy The Best Bora Centipede Risers?
Do you get stressed out thinking about shopping for a great Bora Centipede Risers? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Bora Centipede Risers, which is why we have assembled a comprehensive list of the greatest Bora Centipede Risers available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Bora Centipede Risers that you consider buying. Your questions might include the following:
- Is it worth buying an Bora Centipede Risers?
- What benefits are there with buying an Bora Centipede Risers?
- What factors deserve consideration when shopping for an effective Bora Centipede Risers?
- Why is it crucial to invest in any Bora Centipede Risers, much less the best one?
- Which Bora Centipede Risers are good in the current market?
- Where can you find information like this about Bora Centipede Risers?
We’re convinced that you likely have far more questions than just these regarding Bora Centipede Risers, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Bora Centipede Risers, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Bora Centipede Risers. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Bora Centipede Risers buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Bora Centipede Risers currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Bora Centipede Risers has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Bora Centipede Risers?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Bora Centipede Risers.
- Customer Ratings: Number ratings grade Bora Centipede Risers objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Bora Centipede Risers.
- Product Quality: You don’t always get what you pay for with an Bora Centipede Risers, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Bora Centipede Risers is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Bora Centipede Risers information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Bora Centipede Risers is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.