18 Best Clocks Movements of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Clocks Movements of 2022. Check our ranking below.

2,242 Reviews Scanned

Rank No. #1

TIKROUND Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.
Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.
DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
Package contents: 1 clock movement with 1 hooks,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.
Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

Rank No. #2

2Pcs Quartz Clock Mechanism Kit, Wall Clock Mechanisms Mattery Powered Replacement, Clock Movement Parts Motor Replacement DIY Repair Parts with 5 Set Hands (No Battery)

Two-Clock Mechanisms Size: Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel, These two clock movements can be used for almost any home wall clock.
Silent Clock Mechanism: YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a silent environment. All of your requirements are met by a simple and elegant design.
Material&Package: The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 2 clock movements in different sizes, 5 pairs of hours and minutes hands, 5 seconds hands and second cap, easy to install, and many options in one set.
Wide Application: DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, suitable for repairing, replacing, or making a clock, and also suitable for various styles of the clock frame (no battery)
Warm Notice: Please double-check the dimensions of this clock mechanism replacement movement before purchasing; they are made of aluminum, and please do not apply excessive pressure to avoid bending them.

SaleRank No. #3

Clock Mechanism Replacement,Quartz Battery Operated Movement Silent DIY Wall Clock Repair Parts Replacement Shaft Lengths 16mm(41/64inch)

⏰【Clock Mechanism Size】: Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel.
⏰【Hole Center To The Tip Hand Size】:The hour hands Size:68 mm/ 2.7 inch and 92 mm/ 3.62 inch respectively, minute hands are approx. 66 mm/ 2.6 inch and 95 mm/ 3.62inch, 2 second hand is approx 100 mm/ 3.93 inch.
⏰【Easy to Install】: The clock movements kits is easy for installation, simple and elegant design, these replacement parts suit well to different styles of clock frame; Please choose the suitable size bezel to install the hands.
⏰【Wide Application】:They are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
⏰【Warm Notice】:Please check the dimensions of this clock mechanism replacement movement before purchase, and when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

Rank No. #4

Aloneaka 2 Pieces Silent Clock Movement Mechanism Long and Short Shaft with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment.
Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel.
DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set.
Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying.
Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.

Rank No. #5

31mm Quartz Long Shaft Clock Movement DIY Wall Clock Movement Mechanism Clock Repair Kit Replacement (Shaft Length 1-1/5 inch,2 Pair Hands)

【Quartz Long Shaft Clock Movement】:Good Handwork DIY Clock Replacement Movement Parts With Hook, Which Meet Your Installation Needs.
【Clock Movement Size】:shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch);Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
【Hole Center To The Tip Hand Size】:the hour hands are approx.70 mm/ 2.76 inch and 92 mm/ 3.62 inches respectively, minute hands are approx.100 mm/ 3.94 inches and 114 mm/ 4.5inches, the second hand is approx.104 mm/ 4.1 inches, second caps is approx.7 mm/ 0.28 inches.
【Clock Hands Kit】:package includes 2 pieces of minute hands and 2 pieces of hour hands, 1 second hand and 1 second caps, easy for installation;Simple and elegant design, these replacement parts suit well to different styles of clock frame.
【Wide Application】:they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.

Rank No. #6

suiwotin 1pc Clock Mechanism Replacement, 13mm/0.51 Inch Shaft Length Wall Clock Mechanism, Quartz Clock Movement, DIY Silent Movement Mechanism Replacement (Thread: 0.21"/5.5mm)

Package Included: 1 x Quartz Clock Replacement Parts, Shaft Length: 0.51"/13mm, Thread Length: 0.21"/5.5mm. Size: 2.2" x 2.2"/56mm x 56mm (L x W), Thickness: 0.63"/16mm. Shaft Diameter: 7.5mm, 5.5mm, 3.6mm from hour shaft, to minute shaft and second shaft. Hands are not included.
Reliable & Durable: Made of premium ABS plastic, the silent clock mechanism replacement features with stable performance and long service life.
Easy to Install: Fits for clock panel with 2-3mm thickness. Easy installation instructions, refer to product detail image. The three clock hands should be paralleled from the side viewing. Clock hands are not included.
Wide Application: Featured with silent movement, high precision, low power consumption, the wall clock replacement mechanism are compatible with most quartz clock and wall clock.
Easy to Install: Easy installation instructions, refer to product detail image. The three clock hands should be paralleled from the side viewing.

Rank No. #7

TIKROUND Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm).
Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length.
DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

Rank No. #8

TIKROUND Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up to 40 cm（15.7 Inches ） in Diameter.

Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch).
Silent Movement total shaft length is 16 mm ( 41/64 inch ),thread length is 8 mm ( 5/16 inch ),suitable for 2 - 6 mm ( 5/64 - 15/64 inch ) thickness clock panel.
Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the shaft dimensions.
Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.material to make a clock by yourself.
Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself.

Rank No. #9

EMOON 3 Pieces Silent Clock Mechanism Replacement Kit, Battery Operated Clock Movement Parts with 7 Pack Clock Hands (Total Shaft Length 16mm,20mm,23mm)

Versatile Clock Mechanisms: Our clock movements come in three sizes to fit clock panels from 0 to 1/2 in (12mm) thick. The short shaft is perfect for 0-4 mm thickness, the middle shaft is fit for 4-8 mm thickness, the long shaft is suitable for 8-12 mm thickness.
Protects Your Purchase: Our presentation box comes with custom foam inserts to protect all the clock movements and hands from scratching, bending, and other damage while shipping.
Choose Your Style: Our 7 pack clock hands come in modern and retro classic styles, and you can pick out the style and length of the hands that look best for clock replacement or DIY at no additional charge.
Accurate Time-keeping and Sweep Movement Motor: features High precision Clock Mechanism, ensures watchmaker's accuracy; silent movement; powered by a AA battery, easy hang up on the wall
A Deluxe Clock kit Combo: One set include 3 pack clock movement with different size, 7 pack clock hands for clock repair replacement or clock DIY, applicable to three-dimensional embroidery, craft clock, clock repairing, replacing or making a clock

Rank No. #10

TIKROUND Original Youngtown 12888 Pendulum Clock Movement with 3 Sets of Hands 23 mm (9/10 inches) Shaft Length 15.4 mm (3/5 inch) Thread Length.

Good for repairing, replacing or making a clock.
Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
Pendulum type STEP movement, suitable for 9 - 13 mm (9/25 - 1/2 inches) thickness clock panel;Total shaft length: 23 mm ( 9/10 inches), thread length: 15.4 mm ( 3/5 inch).Max Pendulum Swing: 26°;Max Pendulum Weight: 40g ; Max Pendulum Length: 35cm.
Pendulum type STEP movement, suitable for 9 - 13 mm (9/25 - 1/2 inches) thickness clock panel;Total shaft length: 23 mm ( 9/10 inches), thread length: 15.4 mm ( 3/5 inch).Max Pendulum Swing: 26°;Max Pendulum Weight: 40g ; Max Pendulum Length: 35cm.
This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.

SaleRank No. #11

7pcs High Torque Quartz Clock Movement Mechanism Replacement Clock Kit with 10 Different Pairs of Hands Clock for DIY Handicrafts Repair Clock Parts Shaft Lengths 12mm 15.5mm 21.5mm

Nice DIY clock repair set: This battery clock replacement mechanism set comes with 7 quartz clock movements, 10 pairs of clock hands, 7 gaskets and 7 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from
Size details: the total shaft lengths are approx 12 mm/ 0.47 inches, 15.5 mm/ 0.61 inches, 21.5 mm/ 0.85 inches, and the thread lengths are approx 6mm/ 0.24 inches, 8.5mm/ 0.33 inches, 15.5mm/ 0.61inches. Jump second movement is suitable for 5 mm/ 0.2 inches, 8 mm/ 0.315 inches or 14mm/ 0.55 inches thickness of clock panel; Suitable size is for your easy use and storage
10 Different styles of hands: this clock kit comes with 10 pairs of clock hands in different styles and length for your options, so it is great for clock creations and repairs while providing a decorative effect
Practical: the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping
Wide Application: These clock repair replacement part kit can be applied in bedroom, living room, office, classroom, restaurant, etc, fit for cross-stitch, three-dimensional embroidery craft clock, quartz wall clock and so on.

Rank No. #12

Hicarer Clock Movement Mechanism High Torque Long Shaft Clock Replacement Wall Mechanism Hands Quartzs DIY Repair Parts Motor Replacement with 2 Pairs of Hands

Packaging Include: the package includes one movement, four brackets (note the different colors on the front - black, and back - silver), one rubber gasket, one washer, one hex screw, and two caps; All necessary components for a smooth setup
Size from the Center of the Hole to the Tip: the hour hand is approx. 133 mm/5.2 inches and 116 mm/4.6 inches long, the minute hand is approx. 175 mm/6.9 inches and 160 mm/6.3 inches long; 2 second caps: 7 mm/0.28 inches; Suitable for a length of 16-18mm from the center point to the clock
Clock Mechanism Size: total length of the shaft is approx. 23 mm/0.91 inches, thread length is approx 14.6 mm/0.57 inches; The diameter of the threaded shaft is 8mm/0.31 inches; The second jump movement is suitable for clock panel with a thickness of 9 to 13 mm (0.35 to 0.51 inches)
Packaging and Installation: come with a specially designed blister cardboard box, easy to carry, when you install this clock movement kit, make sure that the hour and minute hand are parallel
Easy to Install: the clock movement kits are easy to install, simple and elegant design, these replacement parts fit well with different styles of clock frame; And please check the size before buying Before purchasing, please verify dimensions by checking the diameter of your clock face and the size of the movement shaft for compatibility

Rank No. #13

TIKROUND Youngtown 12888 Snap in Type 4.5mm Hour Shaft Length Continuous Sweep Non Threaded Quartz Clock Movement 8mm Total Shaft Length (A Hands).

Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing.
Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right replacement.
Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
Movement total shaft length is 8mm (5/16 inch),thread length is 4.5mm (11/64 inch).
Sweep Silent Movement：suitable for 1-2 mm ( 1/25 -5/65 inch ) thickness clock panel.

SaleRank No. #14

Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length.

Good for repairing, replacing or making a clock.
Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
Pendulum type STEP movement, suitable for 9 - 13 mm (9/25 - 1/2 inches) thickness clock panel;Total shaft length: 23 mm ( 9/10 inches), thread length: 15.4 mm ( 3/5 inch).Max Pendulum Swing: 26°;Max Pendulum Weight: 40g ; Max Pendulum Length: 35cm.
This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.

SaleRank No. #15

Hicarer High Torque Quartz Clock Movement Clock Mechanism Replacement with Hands Spade Long 12 Inch for DIY Clock

Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands (10 mm to 450 mm)
Total shaft length: 23 mm (1/ 10 inches), with thread length 11.7 mm (9/ 20 inches), jump second movement suits for 4-8 mm (4/ 25-3/ 10 inches) thickness clock panel
Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length
Package contents: 1 clock movement with hook, 2 hands and some mounting hardware, coming with specially designed cardboard box and instructions
Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure, otherwise they will be bent

Rank No. #16

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement

DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself
Size: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches; Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel
Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment
Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts
5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect

Rank No. #17

PARAOR 8 PCS High Torque Quartz Clock Movement Mechanism Replacement Clock Kit with 12 Different Pairs of Clock Hands for DIY Repair Clock Parts Shaft Lengths 12mm 15.5mm 21.5mm (01)

【Package Contents】:This battery clock replacement mechanism set comes with 8 quartz clock movements, 12 pairs of clock hands, 8 gaskets and 6 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from(Clock faces are not included).
【Size】:The total shaft lengths are approx 12mm(0.47”), 15.5mm(0.61”), 21.5mm(0.85”), and the thread lengths are approx 6mm(0.24”), 8.5mm(0.33”), 15.5mm(0.61”). Jump second movement is suitable for 5 mm(0.2”), 8 mm(0.315”) or 14mm(0.55”) thickness of clock panel.
【Design features】: This clock kit comes with 12 pairs of clock hands in different styles and length for your options, so it is great for clock creations and repairs while providing a decorative effect.
【Practical】:The quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping.
【Applicable scene】:These clock repair replacement part kit can be applied in bedroom, living room, office, classroom, restaurant, etc, fit for cross-stitch, three-dimensional embroidery craft clock, quartz wall clock and so on.

Rank No. #18

2 Pack Non Ticking Wall Miniature Clock Movements Mechanism with 5 Pairs of Short Hands Quartz Motor Kit Battery Operated DIY Repair Parts Replacement, 5/32 In Max Dial Thick, 1/2 In Shaft Length

✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 5 different pairs of hands(4 black and 1 gold), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
✔️Accurate time-keeping&quiet motor:Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches); Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.
✔️ Five of most popular miniature clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge.The Diameter of Clock Panel should be longer than 2.36in/6cm. The clock hands should be less than 3.74in/9.5cm.
✔️ Compatible clock: applicable to cross-stitch, Five-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc.
✔️ Package contents: 2 clock movement,2 Metal hook,2 Mounting hook,5 Second hands,5 Minute hands,5 Hour hands,5 Plastic washers,5 Brass washers and 5 Brass nuts,come with the specially designed protect box.

How Do You Buy The Best Clocks Movements?

Do you get stressed out thinking about shopping for a great Clocks Movements? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Clocks Movements, which is why we have assembled a comprehensive list of the greatest Clocks Movements available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Clocks Movements that you consider buying. Your questions might include the following:

Is it worth buying an Clocks Movements?
What benefits are there with buying an Clocks Movements?
What factors deserve consideration when shopping for an effective Clocks Movements?
Why is it crucial to invest in any Clocks Movements, much less the best one?
Which Clocks Movements are good in the current market?
Where can you find information like this about Clocks Movements?

We’re convinced that you likely have far more questions than just these regarding Clocks Movements, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Clocks Movements, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Clocks Movements. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Clocks Movements buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Clocks Movements currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Clocks Movements has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Clocks Movements?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Clocks Movements.
Customer Ratings: Number ratings grade Clocks Movements objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Clocks Movements.
Product Quality: You don’t always get what you pay for with an Clocks Movements, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Clocks Movements is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Clocks Movements information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Clocks Movements is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Clocks Movements of 2022 – Romance University

How Do You Buy The Best Clocks Movements?

Related Post: