18 Best Ball Joint Puller of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Ball Joint Puller of 2022. Check our ranking below.

2,838 Reviews Scanned

Rank No. #1

Orion Motor Tech Ball Joint Press Kit, Heavy Duty Ball Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.

Rank No. #2

Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)

ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case
HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks
PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool

Rank No. #3

GEARWRENCH Ball Joint Separator | 3916D

Gearwrench's Ball Joint Separator is made for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles
Adjustable for different size ball joints
Suitable for most cars and light trucks (not intended for use on 3/4 ton or 1 ton trucks)
Works on ball joints from 1-1/8” to 2-1/8” and 30 to 56mm in size
Slot is 7/8" wide by 1-1/4" Deep

Rank No. #4

HZAUTOS 10PCS Heavy-Duty Ball Joint Removal Tool Kit, Includes C Frame, 4x4 Adapters, Fits Most 2WD and 4WD Vehicles & Light Trucks, Ideal for Pressing and Removing Ball Joints and U Joints

Durability at Its Best: HZAUTOS ball joint removal tool kit is crafted with sturdy forged steel and features black-oxide finish adapters, ensuring maximum strength and durability even for more complex tasks
Powerful and Efficient: Designed with four wheel drive adapters, our ball joint press and removal tool kit can effortlessly remove press fit parts such as ball joints, U joints, and brake anchor pins without requiring the removal of the control arm, boosting your productivity
User-Friendly Operation: HZAUTOS ball joint repair kit is incredibly intuitive to use. Our lock ring retainers tool can eliminate brake anchor pins quickly, allowing you to place the C-frame press on the brake spider and then use forcing screws to remove the mounting pins
Compatible with Most Vehicles: Our ball joint removal tool is perfect for most domestic and imported 2-wheel drive and 4-wheel drive vehicles and light pickup trucks with press-fit type ball joints. In addition, the 4-wheel drive adapter serves 1967 to current 1/2 and 3/4 ton 4-wheel drive vehicles with Dana 30 or 44 front axle
Comprehensive Package: Our 10PCS ball joint removal tool kit comes with everything you need to complete your repair work with ease, including a C-clamp, a forcing C-screw, an installation adapter, a removal adapter, an installation cup, a receiving cup, an installation cup adapter and three receiving tubes. With our kit, the repair work has never been so easy

Rank No. #5

Bolaxin 78620 Ball Joint Puller, Ball Joint Separator, Heavy Duty Ball Joint Extractor, Nut Removal Tool for Subaru Legacy 1990+, Impreza 1993+, Forester 1998+, Baja 2003+

Work on Subaru Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+, Baja 2003+ and more.
For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints.
Designed for use with a deep 24mm socket and impact wrench. Unthread included 5/8-18 thread adapter to use with any common sliding hammer.
Unique sliding pin non-rotating design removes ball joints in a single pulling motion, reducing the chance of ball joint breakage. You can search a ”Disassemble video” from Youtube to help you work easier.
Package: 1*Ball Joint Puller. Having any questions, contact to us and got an ideal reply within 12 hours. With a 360 days warranty. Thank you.

Rank No. #6

Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06)

1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
4. PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
5. ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

Rank No. #7

DAYUAN 5pcs Professional Front End Service Tool Kit, Pitman Arm Puller, Ball Joint Separator Tie Rod Remover Tool

Professional front end service tool set makes it easy to separate pitman arms, tie rods, and ball joints without damage.
Total 5 units tools are in different shapes and sizes, can remove even the most stubborn ball joints/ tie rods/ pitman arms.
Made of heat-treated alloy steel, with great strength and durability, offering 1 year warranty.
All tools were packed in a convenient ABS carrying case for easy storage and transportation.
List: 1x ball joints separator, 2x C-shape small/ large pitman arms puller, 2x tie rods remover.

Rank No. #8

Ojtrtdr Ball Joint Separator, Ball Joint Press Kit, Universal Ball Joint Puller with Lower Control Arm Pry Tool, 2-3/8 Inch, Ball Joint Removal Tool, Fits Most Cars, Trucks

Versatile: Our ball joint separator is versatile and designed to remove ball joints from most vehicles, so it is suitable for all kinds of cars and trucks. This product is suitable for mechanics and people who like to DIY
STRONG MATERIAL: Our ball joint separator is made of material, strong and not easy to break. You can rely on its strength and enjoy the fun of using a resistant tool for your own life
EASY TO OPERATE: With our ball joint separator, removing the ball joints is a breeze without damaging the rubber boot. Simply twist the nut to remove the joint effortlessly. Simple, convenient and practical
LIGHTWEIGHT AND STABLE: Our ball joint separators have a slim design that allows them to fit easily in tight spaces where conventional separators cannot fit. The precise threads resists slipping and provide you with stable operation
LOWER CONTROL ARM GRINDING TOOL: In addition to being a multi-functional ball joint remover, our product is an excellent lever tool for grinding lower control arms. It can grind the lower control arm for convenience

Rank No. #9

OEMTOOLS 25202 Ball Joint Separator, 15/16 Inch Pickle Fork Tool, Heavy Duty Steel Tie Rod Removal Tool, Ball Joint Removal Tool, And Joint Splitter

Pickle Fork Separator Tool: The tapered fork wedge design of this ball joint separator tool focuses on the fundamentals of machine technology for an easy and uncomplicated process
Precision Performance: Striking the handle with a hammer separates the ball joint cleanly; Designed with a 15/16 inch opening for a firm hold and secure removal
Hardened Steel: The heat treated steel alloy construction of this ball joint separator stands up to tough jobs; Zinc plating resists rust and extends service life
Thoughtful Design: Ball joint separator handle features a nonslip knurled texture; Used as designed, this front end service tool will stand up to years of use
Versatile Uses: This universal ball joint separator can be used for a variety of repairs; For example, the ball joint tool can also be used on CV drive shafts

Rank No. #10

KOOPOOL Ball Joint Press & U Joint Removal Tool Kit 10 PCS for Ball Joint, U-Joint, Brake Anchor Pins Removal and Installation with Carrying Case, Suspension System Service Tool Kit

WIDELY APPLICATION: Professional ball joint & u-joint service kit, works for ball joint removal/installation, U joint removal/installation and brake anchor pins assemble/disassemble. Even remove rusted and corroded parts.
UNIVERSAL COMPATIBLE: Fits most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars, vehicles and light pickup trucks that have press-fit type ball joints.
EASY OPERATION: Includes heavy-duty C frame press, receiver tubes, and installation and removing adapters. Ideal for removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins without removing the control arm from the vehicle, effectively avoid the deformation of the front axle and the ball joint.
PREMIUM MATERIAL: Heavy duty C-clamp with forcing screw constructed from heavy-duty forged 20# steel, ensure maximum strength and toughness; Black-oxide finished adapters for anti-rust and anti-corrosion, extend service life.
HEAVY DUTY CARRYING CASE: Come with a 15.35 x 12 x 3.34inch heavy-duty plastic blow molded carrying case with handle for simple organization, dry storage and safe transport.

SaleRank No. #11

Handor Ball Joint Separator, 5-in-1 Mechanic Tools, Pitman Arm Puller, Tie Rod End Removal Tool Set for Front End Service, Splitter Removal Kit

🚗 For automotive front end work including changing tie rod ends, ball joints steering linkages and steering boxes. Pullers designed to permit part reuse versus “pickle-fork” type tools that may damage parts. Includes Tie Rod End Pullers, Pitman Arm Puller, Ball Joint Remover and Tie Rod End Lifter. Any automotive specialty tool will help make an automotive repair or maintenance task easier.
🚗 The kit can be used to easily removes common pitman arms, tie rods, and ball joints. The set includes 1 pitman arm puller, 1 universal ball joint separator, 1 outer tie rod remover, and 2 tie rod end pullers. All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage and easy storage.
🚗 Ball joint separator set is made of premium and durable alloy which can stand up to the toughest jobs.Removes the most stubborn ball joints, tie rod ends, and pitman arms.Each tool was built to withstand high-force applications.
🚗 The full range adjustable tool set with different shapes and size allows for both foreign and domestic vehicles. Effective press-type ball joint separator allows easy separation of pitman arms, tie rods, and ball joints without damaging to boots and other parts that fork-type removers may cause.
🚗 Handor ball joint separator tools are (by far) the easiest means possible for removing ball joints. This high quality ball joint separator is essential for auto mechanics and car enthusiasts to easily loosen and remove ball joints for replacement and repair!

Rank No. #12

Orion Motor Tech Ball Joint Tool Compatible with Subaru, with Lower Control Arm Prying Tool Upper Ball Joint Puller Lower Ball Joint Puller Compatible with Legacy Impreza Forester Outback Baja

Compatible with Subaru Ball Joints :This Orion Motor Tech ball joint puller lets you change out the ball studs and housings on most late model Subaru autos and SUVs, including Legacy (1990-present), Impreza (1993-present), Forester (1998-present), Baja (2003-present), Outback (2000-present) and more
Precise Fit :The custom sliding pin and housing on this handy suspension tool will press out your ball joint without allowing its stud to spin, reducing the chance of cracks, breaks, or damage when handling stubborn worn, seized, or rusted out parts
Easy to Use :Our ball joint removal tool fits 24mm impact and socket wrenches and any common slide hammer with a 5/8"-18 threaded end
Heavy Duty :These ball joint separator tools are made from rugged carbon steel, drop forged, heat treated, and specially coated to provide unrivaled strength and years of reliable service
Pryer Included :This Orion Motor Tech ball joint removal tool kit includes the lower control arm prying tool necessary to get your work done; it fits any 7/8" pry bar to keep this project a one person job

SaleRank No. #13

KZINO Ball Joint Separator, 5-in-1 Ball Joint Removal Tool Set, Splitter Removal Kit, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, 5PCS Ball Joint Puller

【All-in-One Ball Joint Separator】 Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
【Hard Alloy Structure】 The ultra hard and durable alloy means these tools can withstand the toughest work. This front-end repair kit can remove the most stubborn ball joints, tie rod ends, and steering arms.
【Compatible with Most Vehicles】The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
【Professional Portable ABS Case】The customized molded casing is made of high-quality ABS hard plastic, suitable for amateur or professional mechanics to use on the road. Conveniently place all tools in an orderly and secure location. Never miss work or projects due to tools being misplaced.
【Satisfied Customer Service】If there are any issues with our tool, please feel free to contact us at any time. We guarantee the quality of our tools and hope to ensure that you receive the best. Because to do the best, you deserve the best, this is our Orion car technology promise.

SaleRank No. #14

Performance Tool W83052 Ball Joint Puller, Carbon Steel, Heat-Treated, Black

SUBARU BALL JOINTS: This tool is designed to easily remove seized, rusted or corroded ball joints on a variety of Subaru vehicles
SWIFT: Removes ball joints in a single pulling motion to reduce the risk of ball joint breakage
CORROSION-RESISTANT: Featuring a black oxide coating for optimal corrosion resistance
STRONG: Made from carbon steel that is cold-forged and heat-treated for greater strength and added longevity
INSTRUCTIONS: Use a 3/4 in. (19 mm) socket and your impact wrench while holding the body with a 1-5/8 in. (40 mm) wrench

Rank No. #15

SIXIWANZI 6PCS Ball Joint Separator Tool, Heavy Duty Pitman Arm Puller Kit

Comprehensive Front End Service Kit: SIXIWANZI ball joint separator set includes 6 adjustable tools for various domestic and import vehicles, ensuring you have the right tool for the job every time
Sturdy Alloy Construction: The ball joint removal tool, crafted from hardened alloy, is designed to withstand tough jobs, ensuring the removal of stubborn ball joints, tie rod ends, and pitman arms with guaranteed durability
Universal Compatibility: Versatile design allows for use as a pitman arm puller, ball joint separator, or tie rod end puller on a wide range of small domestic rear-wheel-drive vehicles, import vehicles, and light trucks
Professional Portable Case: The ball joint press kit, housed in a ABS hard plastic case, keeps tools organized and secure, ideal for both amateur and professional mechanics on the move
Quality Assurance: This front end service kit guarantees quality and offers reliable customer support to ensure you get the best performance from your tools

Rank No. #16

BELOMI Universal Ball Joint Separator, Adjustable Ball Joint Puller, Heavy Duty Removal Tool for Separating Arms, Tie Rods, and Ball Joints, Separator Tool for Cars Trucks and SUVs

【Sturdy and Durable】: Our ball joint separator is forged from high quality alloy, ensuring the tool is high strength, strong and durable, corrosion resistant, wear resistant and reliable to use, giving it a long service life. It is the best choice for professional mechanics.
【Operation Method】: This unique ball joint puller is easy to install, first loosen the coupling nut between the ball joint and the spindle support arm, slide the end of the fork between the boot and the metal connection point, slide the end of the fork between the boot and the metal connection point, and the tool will loosen immediately when the studs are loose.
【Adjustable Sizes】: To accommodate the variety of vehicles that this nearly universal tool can serve, this product of ours has an adjustable feature with an adjustable range of 1.18-1.97 inches, expanding the work area to accommodate a variety of sizes and vehicles.
【Applicability】: Universal ball joint separator for domestic US and European import/foreign vehicles, suitable for most cars, trucks and even ATVs. removal tool for separating arms, tie rods and ball joints on vehicles, quickly and easily separating the vehicle's ball joints from the spindle support arms.
【Essential Tools】: Our ball joint extractor is very simple and practical, and is an essential tool for your daily use. It uses the principle of leverage to save time and effort, helping you to work easily for your vehicle and make life easier with the right tool. You can also give it as a gift to a vehicle enthusiast during the holidays.

Rank No. #17

TOMMARS Ball Joint Separator Tie Rod End Tool Pitarm Arm Puller for Front End Service

3 pieces front end service kit is designed for seperating ball joint, outer tie rod and pitman arm found on automotive applications.
The press scissor or cup design ball joint separator tool allows for ball joint removal without damage to joint and other parts often caused by hammers and pickle forks.
The durable heat-treated steel construction of this front end service kit fits a wide range of domestic and imported FWD vehicles for repair.
Information: adjustable ball joint separator: 7/8" (20mm) jaw spread, 1-1/8'(30mm) jaw force range adjustable up to 2-1/8'' (56mm); ball joint separator: jaw spread 25/32"(20mm), jaw force range to 1-15/16"(50mm); conical pitman arm puller: jaw spread : 3/4''(19mm), jaw force range to 1-3/4"(44mm);
ATTENTION: Please measure your ball joint of size before purchasing, and check the specifications of the Ball Joint Separator, whether it is suitable for your ball joint!!!!

Rank No. #18

DURATECH 5PCS Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit, for Car SUV Light Truck, Storage Case Included

Wide Application: This bearing extractor can complete a wide variety of pulling jobs on many different pieces of equipment; The parts within this bearing splitter set are effective in removing bearings, pulleys, gears, and bushes, the versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks
High Efficiency: Duratech bearing puller set has up to 5 Tons capacity and can be used separately or with other puller tools, giving the user options to deal with various pulling jobs. Suitable for beginners or professionals to use
High-quality Materials: You don’t have to worry about this bearing puller set of tools breaking on the job; Constructed from heat treated Chrome Alloy steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
Package List: 1 × Pitman arm and tie rod end puller, 1×Pitman arm puller, 1×Conical pitman arm puller, 1×Ball joint separator, 1×Tie rod and ball joint remover
Protective Carrying Case: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know, give it a try and if you realize you have one of the few vehicles that it doesn't fit, please don’t hesitate to reach out to our team

How Do You Buy The Best Ball Joint Puller?

Do you get stressed out thinking about shopping for a great Ball Joint Puller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ball Joint Puller, which is why we have assembled a comprehensive list of the greatest Ball Joint Puller available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ball Joint Puller that you consider buying. Your questions might include the following:

Is it worth buying an Ball Joint Puller?
What benefits are there with buying an Ball Joint Puller?
What factors deserve consideration when shopping for an effective Ball Joint Puller?
Why is it crucial to invest in any Ball Joint Puller, much less the best one?
Which Ball Joint Puller are good in the current market?
Where can you find information like this about Ball Joint Puller?

We’re convinced that you likely have far more questions than just these regarding Ball Joint Puller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ball Joint Puller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ball Joint Puller. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Ball Joint Puller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ball Joint Puller currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Ball Joint Puller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Ball Joint Puller?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Ball Joint Puller.
Customer Ratings: Number ratings grade Ball Joint Puller objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ball Joint Puller.
Product Quality: You don’t always get what you pay for with an Ball Joint Puller, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Ball Joint Puller is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Ball Joint Puller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ball Joint Puller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Ball Joint Puller of 2022 – Romance University

How Do You Buy The Best Ball Joint Puller?

Related Post: