18 Best B&K Precision 4030 Pulse Generator of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best B&K Precision 4030 Pulse Generator of 2022. Check our ranking below.
2,580 (random num) Reviews Scanned
- Number Of Items: 1
- Country Of Origin: China
- Package Dimensions: 41.402 L X 33.02 W X 20.066 H (Cm)
- Package Weight: 8.45 Pounds
- Upgraded Signal Stability: Seesii Dual-channel DDS arbitrary waveform generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened
- Storage And Custom: You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. In addition, it has a very good software package that allows you to create your own waves and frequency combinations. After you save them, you can disconnect the unit from the computer and use them for any applications you wish
- High Precise: Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.Duty cycle of each channel can be adjusted separately. Precision can be 0.1%
- Frequency Meter: With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function.The settings allow you to enter up to 20volts
- Lightweght Compact and Portable: With intuitive control panel, you can easy to control.This Signal Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research. This is an important tool for both experts and newcomers
- PARAMETER ---- operating voltage range DC 3.3v~30v; frequency range 1Hz-150kHz; output current 5-30mA; duty cycle range 0-100%.
- APPLICATION ---- as square wave signal generator for experimental development; as square wave signal generator for motor driver; as adjustable pulse generator for MCU; as pulse generator, control related circuits (PWM dimming, speed regulating).
- SERIAL COMMUNICATION ---- support serial communication, TTL level.
- DATA AUTO STORAGE ---- all parameters will be saved automatically after setting and therefore won't lose when power off.
- OTHER FEATURES ---- with LCD display to display frequency and duty cycle value; with case; PWM output, can set frequency and duty cycle separately by buttons; frequency value is divided into 4 range and switched automatically, with high precision.
- Allows modern engines to be mated to non-electronically controlled automatic transmission
- Converts mechanical speed signal into a digital square wave signal
- Fit type: Universal
- Part number: SKU_00000058
- WIDE APPLICATION: The pwm pulse generator is used as generator to generate for experimental development and use to generate for controlling motor drivers
- GENERATE ADJUSTABLE PULSES: This pulse frequency generator module generates adjustable pulses for MCU use and control related circuits (applications such as PWM dimming and speed regulation)
- FEATURES: The rectangular generator has PWM output, this module can set the frequency and duty cycle separately, with wide frequency range and high accuracy
- LCD DISPLAY FUNCTION: The frequency and duty cycle of the LCD display are very clear. This pwm generator board can communicate with serial port. All setting parameters are saved after power off
- SPECIFICATION: XXX (without decimal point): the smallest unit is 1Hz, in the range 1Hz ~ 999Hz, X.XX (one hundred decimal point) is minimum unit 0.01Khz, ranging 1.00Khz ~ 9.99Khz, XX.X (ten in decimal): minimum unit is 0.1kHz; range 10.0KHz ~ 99.9KHz, X.X.X (decimal in ten and one hundred): minimum unit is 1Khz; range 1KHz ~ 150KHz
- Two independent PWM outputs, the frequency and duty cycle can be set separately
- Wide frequency range and high precision
- Serial communication is possible
- 【PWM Pulse Frequency Generator】 Work voltage range: DC 3.3V-30V; frequency range: 1Hz-150kHz/1Hz-15kHz; output current: 5-30mA.
- 【XY-KPWM Signal Generator】PWM frequency supports 2 working modes. Normal mode with 1% duty cycle steps, . Precise mode with 0.1% duty cycle steps. High frequency range, high precision.
- 【With Locking Function】Knob supports lock function to avoid misoperation. Can set frequency & duty cycle separately; duty cycle upper and lower bounds adjustable; support serial communication; all data auto-saved after setting.
- 【Square Wave Signal Generator】Generating square wave signal for experimental development, generating square wave signal that controls the motor driver, and generating adjustable pulses for mcu dimmer; dimmer; speed governor, and so on.
- 【Function Generator Module 】PWM signal generator use potential encoder to adjust, easy to use; shell protection and clear LCD display, PWM with switch. (Package contains 2pcs signal generator)
- PARAMETER --- working voltage range 3.3V-30V; frequency range 1Hz-150kHz/1Hz-15kHz; output current 5-30mA; frequency accuracy 2% in each range.
- APPLICATION --- as square wave signal generator for experimental development; as square wave signal generator for motor driver; as adjustable pulse generator for MCU; as adjustable pulse generator for PWM dimming, speed regulating, etc.
- DISPLAY--- clear LCD displays frequency & duty ratio value.
- MODE --- 2 modes, normal mode & accurate mode.
- FEATURE --- with lock function; PWM output, can set frequency & duty cycle separately; duty cycle upper and lower bounds adjustable; support serial communication; all data auto saved after setting.
- 3 Channel PWM Pulse Generator Signal Generator Module.
- Adjustable Frequency Square Wave Rectangular Wave Signal Generator.
- Three-channel PWM is outputted,wide frequency range and the duty ratio can be adjusted independently.
- Has 8 independent keys,used to set the frequency and duty ratio,support short press (increase or decrease a unit) and long press (fast increase or decrease),very simple,set the parameters automatically save,power loss.
- 3-Channels duty ratio button can be pressed at the same time,real-time adjustment, liquid crystal display is the last pressed button duty ratio,real-time is very strong,can be used as a simple several road duty ratio scan.
- 【Signal Generator Parameters】Work voltage: DC 3.3v~30v, with anti-reverse polarity protection; Frequency range:1Hz~150KH, the accuracy is about 2%; Duty cycle range:0-100%, 1% step; Number of pulses: 1-9999, or infinite (display '----' means infinite); Delay output time: 0.000s-9999s, the minimum can be set to 1ms; Positive and negative pulse width length: 0.000s-9999s, the minimum can be set to 1ms; Signal carrying capacity: ZK-PP1K: less than 30mA.
- 【Dual Mode】Signal Generator ZK-PP1K PWM controller has 2 modes: PWM mode: adjusting frequency, duty cycle. The number of pulses is not adjustable, and the waveform is continuously sent; PULSE mode: positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable; With the start and stop button (ZK-PP1K can be connected to an external switch to control the output signal ON/OFF); Wide voltage input 3.3V-30V, with anti-reverse connection protection.
- 【PWM Pulse Generator】Instruction: 1. An output waveform when powered on; 2. Waveform amplitude = power supply voltage; 3. When the number of output pulses reaches the set value, the output will be automatically stopped, and 'OUT' will disappear; 4. Press the ON key to control the presence or absence of the waveform, the disappearance of OUT means that there is no output waveform, and the output is 0; 5. Power on and restart or ON key to turn on the output, and recalculate the number of pulses.
- 【Frequency Generator Features】ZK-PP1K can be matched with drivers to realize dimming, speed regulation, control solenoid valves, etc., but cannot directly drive loads such as electric light motor solenoid valves, etc.
- 【Function Generator Applications】PWM signal generator, square wave rectangular wave signal generator can be used used to generate square wave and rectangular wave signals to control DC motor or stepper motor driver; it is used for servo motor, stepper motor, electric gripper, replace PLC pulse, etc.
- Experience precision at its finest with our advanced PWM signal generator, boasting a wide frequency range of 1Hz to 150KHz, ensuring high accuracy for diverse applications, complemented by the convenience of a crystal-clear LCD display for frequency and duty cycle monitoring.
- Elevate your project's functionality with our versatile signal generator, featuring three channel PWM outputs; tailor your frequency settings easily while maintaining a consistent output across all channels, all showcased on an intuitive LCD display.
- Streamline your workflow with the user-friendly interface of our PWM signal generator, offering hassle-free communication via serial port and an expansive frequency range, perfect for a multitude of scenarios, and made visible through a crisp, easily readable LCD display.
- Opt for unmatched clarity and ease of adjustment with our signal generator, where each PWM output is finely tunable to your specific needs, and real-time frequency and duty cycle information is beautifully rendered on the LCD display for immediate reference.
- Has 8 independent keys,used to set the frequency and duty ratio,support short press (increase or decrease a unit) and long press (fast increase or decrease),very simple,set the parameters automatically save,power loss.
- Type:Accessories,
- Accessories Function:Motor,
- Model:LDTR-417995,
- Dimension(cm):7*5*2,
- Net Weight(kg):0.006,
- PWM Mode: voltage, frequency, and duty cycle are adjustable with an accuracy of up to 0.1%; voltage range: 1-24V, frequency range: 1-150KHZ, duty cycle range: .
- Multi-modes : The multi-function adjustable generator supports multiple modes, such as PWM mode, pulse mode, source mode, and mode.
- Source Mode: voltage source 2-10V, current source 4-20mA. mode: 1-1000Hz.
- Pulse Mode: initial delay time T0: 0-60S, high level time T1: 0-60S, low level time T2: 0-60S, pulse number PulseNun: 1-60000.
- Good Proformance : Powerful load capacity, output current up to 30mA. Clear display, simple control panel layout.
- ♥Product introduction: This series of products are PWM and pulse signal generators. There are PWM mode and pulse mode. Only one mode can be used at a time, but the two modes can be switched at any time.
- ♥Features: 1. Two modes can be selected: PWM mode - frequency (continuous), duty cycle. The number of pulses is not adjustable, and the waveform is continuously sent; PULSE pulse mode - positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable. 2. With the start and stop button (ZK-PP1K can be connected to an external switch to control the output signal ON/OFF). 3. Wide voltage input 3.3V-30V, with anti-reverse connection protection.
- ♥Product Specifications: 1. Working voltage: 3.3V~30V, with anti-reverse polarity protection 2. Frequency range: 1Hz~150KHz, the accuracy is about 1% 3. Duty cycle range: 0-100%, 1% step 4. Number of pulses: 1-9999, or infinite (display '----' means infinite) 5. Delay output time: 0.000s-9999s, the minimum can be set to 1ms 6. Positive and negative pulse width length: 0.000s-9999s, the minimum can be set to 1ms 7. Signal carrying capacity: ZK-PP1K: less than 30mA
- ♥Operation explanation: 1. There is an output waveform when powered on; 2. Waveform amplitude = power supply voltage; 3. When the number of output pulses reaches the set value, the output will be automatically stopped, and 'OUT' will disappear; 4. Press the ON key to control the presence or absence of the waveform, the disappearance of OUT means that there is no output waveform, and the output is 0; 5. Power on and restart or ON key to turn on the output, and recalculate the number of pulses;
- ♥Application scenarios: 1. PWM signal generator, square wave rectangular wave signal generator. 2. It is used to generate square wave and rectangular wave signals to control DC motor or stepper motor driver; it is used for servo motor, stepper motor, electric gripper, replace PLC pulse, etc. 3.ZK-PP1K can be matched with drivers to realize dimming, speed regulation, control solenoid valves, etc., but cannot directly drive loads such as electric light motor solenoid valves, etc.
- 4, 500 peak watts/ 3, 700 running watts
- Capable of up to 15 hours of extended operation at half load on 3. 2 gallons of fuel
- Convenient wireless remote start allows you to operate the unit from up to 80 ft away
- Quiet operation (63 db) make it virtually silent from just 10 Feet away
- Compact design with extendable Handle and Never-Flat wheels for easy handling and storage capability
- Adjustable Value: Pulse square rectangular duty cycle, frequency and amplitude are all adjustable, the upper and lower limits can be set, and the main interface can be customized.
- Duals Mode: Pulse square rectangular duals mode design, the frequency range of normal mode is 1Hz‑150KH, and the frequency range of fine mode is 1Hz‑15KHz.
- Lcd Display: The generator module is equipped with LCD to display frequency, duty cycle and amplitude, with ON OFF buttons for easy operations.
- Output Range: The power module outputs DC1V-24V 3W, which can be used as a 3W CNC power supply. It is used to generate square waves signals to control the motor driver and generate adjustable pulses for Mcu.
- Other Functions: Power supply module with lockout function to prevent misoperation and save all parameters after power failure. With lockout function to prevent misoperation, all parameters, save after power failure
- ►Working voltage: 3.3 ~ 30V; Frequency range: 1Hz ~ 150KHz
- ►Frequency accuracy: the accuracy in each range is about 2%; signal load capacity: the output current can be about 5 ~ 30ma
- ►Output amplitude: PWM auxiliary value is equal to power supply voltage; ambient temperature: -20 ~ + 70 ℃
- ►All parameters will be saved automatically after setting and therefore won't lose when power off.
- ►APPLICATION ---- as square wave signal generator for experimental development; as square wave signal generator for motor driver; as adjustable pulse generator for MCU; as pulse generator, control related circuits (PWM dimming, speed regulating).
- The scope of application of this module: As a square wave signal generator, generate square wave signals for experimental development and use. Used to generate a square wave signal that drives a stepper motor driver. The adjustable pulse is used by the MCU. Generate adjustable pulses to control the associated circuitry.
- The main chip: NE555; input voltage: 5V-15VDC. 5V power supply, the output current can be around 15MA; 12V power supply, the output current can be around 35MA; input current: ≥100MA;
- Output amplitude: 4.2V V PP to 11.4V V-PP. (Depending on the input voltage, the output amplitude will be different); The maximum output current: ≥15MA (5V power supply, V-PP greater than 50%), ≥ 35MA ( 12V power supply, when V-PP is greater than 50%)
- Output with LED indication, there is no output, visually visible (low LED when the high; when the high level LED off; when the frequency is relatively low, the LED flashes);
- The output frequency range grade is optional, making the output frequency more continuously adjustable; low frequency range: 1Hz-50Hz, medium frequency range: 50Hz-1kHz, medium-high frequency range: 1KHz-10kHz, high frequency range: 10kHz-200kHz.
How Do You Buy The Best B&K Precision 4030 Pulse Generator?
Do you get stressed out thinking about shopping for a great B&K Precision 4030 Pulse Generator? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching B&K Precision 4030 Pulse Generator, which is why we have assembled a comprehensive list of the greatest B&K Precision 4030 Pulse Generator available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for B&K Precision 4030 Pulse Generator that you consider buying. Your questions might include the following:
- Is it worth buying an B&K Precision 4030 Pulse Generator?
- What benefits are there with buying an B&K Precision 4030 Pulse Generator?
- What factors deserve consideration when shopping for an effective B&K Precision 4030 Pulse Generator?
- Why is it crucial to invest in any B&K Precision 4030 Pulse Generator, much less the best one?
- Which B&K Precision 4030 Pulse Generator are good in the current market?
- Where can you find information like this about B&K Precision 4030 Pulse Generator?
We’re convinced that you likely have far more questions than just these regarding B&K Precision 4030 Pulse Generator, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for B&K Precision 4030 Pulse Generator, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible B&K Precision 4030 Pulse Generator. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an B&K Precision 4030 Pulse Generator buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available B&K Precision 4030 Pulse Generator currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of B&K Precision 4030 Pulse Generator has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an B&K Precision 4030 Pulse Generator?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your B&K Precision 4030 Pulse Generator.
- Customer Ratings: Number ratings grade B&K Precision 4030 Pulse Generator objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their B&K Precision 4030 Pulse Generator.
- Product Quality: You don’t always get what you pay for with an B&K Precision 4030 Pulse Generator, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an B&K Precision 4030 Pulse Generator is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining B&K Precision 4030 Pulse Generator information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding B&K Precision 4030 Pulse Generator is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- Broset Precision Stop Block
- Hoppe’S No 9 Lubricating Oil 14.9 Ml Precision Bottle
- Wiha 26791 Precision Torx T1 T8 Set 8 Piece
- Klearlook Precision Screwdriver Set
- Precision Beauty Sonic Facial Cleansing Massager
- Precision Pet Log Cabin Insulation Kit
- Apollo Precision Tools Dt0738 Household Tool Kit 161 Piece
- Wiha 26791 8 Piece Precision Torx Screwdriver Set
- Southwest Precision Cheek Rest
- Precision Pro Nx7