18 Best Dimple Die Eastwood of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Dimple Die Eastwood of 2022. Check our ranking below.

2,269 Reviews Scanned

SaleRank No. #1

Eastwood 5 Pieces Sheet Metal Dimple Die Kit Set Hole Flares To Create Flares With Machine

5 Pieces 5 Sizes For Create Flares In Sheet Metal Up To 1/8 in. Thick Using The Eastwood Dimple Dies.
Includes Both Male And Female Dies
Form Clean 45 Degrees Flares In Up To 1/8 in. Thick Steel
Made With High-Strength Chrome Moly Steel ; Machined To Close Tolerances
1/2 in. Die - Requires 1/2 in. Hole - Flare Width 0.7 in. ; 1 in. Die - Requires 1 in. Hole - Flare Width 1.4 in. ; 1.5 in. Die - Requires 1-1/2 in. Hole - Flare Width 2.15 in. ; 2 in. Die - Requires 2 in. Hole - Flare Width 2.85 in. ; 2.5 in. Die - Requi

Rank No. #2

Dimple Die Set 3 Piece Metal Fabrication Tools 1/2" / 3/4" / 1"

Kits consists: 1/2"(.500) , 3/4" (.750) , 1" (1.00) . the same as the picture.
Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80.
Made for use with a hydraulic press or arbor press. There are no holes in the middle of these dies.
Fits for Polaris RZR XP1000, Yamaha YXZ, Jeep, UTV, Sandcar, Truck, Hot rods, Can Am Maverick X3, Race cars.
100% Brand new with good performance. 1 Year Unlimited-mileage Quality Guarantee.

Rank No. #3

4 Piece Set Spring Back Dimple Die, 100° Countersink. 3/32” 1/8” 5/32” 3/16”. for Sheet Metal Fabrication. Fits Hand and Pneumatic Rivet Squeezers.

4 piece spring back dimple die set, 100° countersink. Includes dies for 3/32” 1/8” 5/32” 3/16”.
These dimple dies are designed to form a 100° countersink when working with thin aluminum or other soft metals when installing flush head rivets or other fasteners with a 100° head.
A Dimple die set for sheet metal is typically used when flush fasteners are desired but the material is two thin to drill a countersink hole. Example 0.025" aluminum.
A dimple die requires a hand or pneumatic rivet squeezer to form the dimple in the sheet metal. These dies fit most such squeezers and feature a 0.187" diameter shank.
Spring back dimple dies are available in 4 separate sizes and as a 4 piece kit. If buying only one size make sure it fits the diameter of your fastener and that your fastener has a 100° head.

SaleRank No. #4

3 Piece Dimple Die Set Metal Fabrication Tools 1/2" / 3/4" / 1"

✅Heavy Duty SAE 8620 steel, Rockwell hardness of 80
✅Kits consists of the following dies: 1/2"(.500) 3/4" (.750) 1" (1.00)
✅Enhance Performance. Easy Installation. High Reliability.
✅Brand new with good performance
✅1 Year Unlimited-mileage Quality Guarantee

Rank No. #5

LOUDERLUN Hole Punch & Flare Tool Dimple Plate Dies in Black (Sizes (inches): 1)

Finish Hole (inches): +1/8 (approximate)
Flare Height (inches): 1/4 (approximate)
Construction: steel
Punch and flare a hole in up to 1.5MM/16 gauge steel
Use with draw-bolt or in Bench Press

Rank No. #6

3 Piece Dimple Die Set 1/2" / 3/4" / 1" Metal Fabrication Tools

【 Dimple Die Set】 Include : 1/2"(.500) *1 , 3/4" (.750) *1, 1" (1.00) *1 -- 3 PCS Popular Sizes To Choose From
【 Good Performance 】Made for use with a hydraulic press or arbor press. No holes in the middle of these dies. Providing rigidity to sheetmetal projects.
【 Premium Material 】Heavy Duty SAE 8620 steel with a Rockwell hardness of 80
【 Fitment Type 】Suitable for Polaris RZR XP1000, Yamaha YXZ, Jeep, UTV, Sandcar, Truck, Hot rods, Can Am Maverick X3, Race cars.
【 Usage Suggestion 】 Recommend no thicker than 3/16" material like thick steel , aluminum or stainless sheetmetal. Recommend lubricants when using the dies & Reduce die wear and gulling.

Rank No. #7

LOUDERLUN 3 Piece Dimple Die Set: 1-1/2" 1-3/4" 2"

3 Piece Dimple Die Set Metal Fabrication Set Kits consists of the following dies: 1-1/2"(1.50), 1-3/4"(1.75), 2"(2.00).
Dies are CNC machined from premium Cr steel with a Rockwell hardness of 80. These dies are great for virtually anything you can dream up.
Common uses are : -Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8" material. We recommend lubricants when using the dies.This will reduce die wear and gulling.

Rank No. #8

Dimple Dies for Metal Fabrication, Multiple Sizes to Choose from (2")

Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
Great selection of popular sizes to choose from
Mix and match to get the sizes you want !
Local United States Shipper

Rank No. #9

LOUDERLUN 3 Piece Dimple Die Set: 1-1/4" 2-1/2" 3"

3 Piece Dimple Die Set Metal Fabrication Set Kits consists of the following dies: 1-1/4"(1.25), 2-1/2"(2.5), 3"(3.00)
Dies are CNC machined from premium Cr steel with a Rockwell hardness of 80. These dies are great for virtually anything you can dream up.
Common uses are : Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8" material. We recommend lubricants when using the dies.This will reduce die wear and gulling.

Rank No. #10

3 Piece Dimple Die Set 1/2" 3/4'" 1"

Great selection of popular sizes
Local United States Shipper
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions

Rank No. #11

UTVDISTRIBUTION Dimple Die (1-1/2)

1-1/2" Dimple Die
Great dies for dimpling panels on vehicles or in hydraulic press. These can be used in a hydraulic press or bolted together.
Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80. Case hardened proprietary design.
These are designed to work with steel, aluminum and thinner gauge stainless steel plate. On sizes 1/2"-2" they work best with 1/8" thick materials. Dies 2-1/4"-3" will dimple thicker material based on your press tonage.
Great kit for dimpling panels on vehicles or in hydraulic press. Popular set for powersports and race chassis projects.

Rank No. #12

10 Piece Dimple Die Set 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/2" 3" Includes Dzus Dimple Die

Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
Great selection of popular sizes. Must have in your toolbox!
Holes must be drilled before you dimple the materials.(These do not act as punches)
10 Piece set provides the best variety of dimple options for many applications.
45 degree flare angle. Great for lighting panels and adding structural integrity.

Rank No. #13

Globauto 2" Hole Punch & Flare Tool Dimple Plate Dies in Black

Finish Hole (inches): +1/8 (approximate)
Flare Height (inches): 1/4 (approximate)
Construction: steel
Punch and flare a hole in up to 1.5MM/16 gauge steel
Use with draw-bolt or in Bench Press

Rank No. #14

LOUDERLUN 9 Piece Dimple Die Set : 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3"

Common uses are : Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8" material. We recommend lubricants when using the dies.This will reduce die wear and gulling.
Metal Flaring Capacity: Mild Steel: 1/8, Aluminum: 1/8, Stainless Steel: 3/32
Tools Required (not included): A set of sharp, high-quality metal saws in sizes corresponding to those in the Die Set. A 20 Ton Hydraulic Shop Press or equivalent.

Rank No. #15

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/2"

Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13.
Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size)
This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes.
Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish.
This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372.

Rank No. #16

LOUDERLUN 3 Piece Dimple Die Set 1/2" 3/4" 1"

3 Piece Dimple Die Set Metal Fabrication Set Kits consists of the following dies: 1/2"(.500) 3/4" (.750) 1" (1.00) Everything shown in first image.
Dies are CNC machined from premium Cr steel with a Rockwell hardness of 80. These dies are great for virtually anything you can dream up.
Common uses are : -Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project.

Rank No. #17

UTVDISTRIBUTION Dimple Die Set Sizes 1/2"-3/4"-1"-1 1/4" 1 1/12" 1 3/4" 2"

7 Piece set with most popular sizes
Kits consists of the following dies: 1/2" (.500) 3/4"(.750) 1"(1.00) 1 1/4" (1.250) 1 1/2" (1.500) 1 3/4"(1.750) 2" (2.00)
Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80. Case Hardened.
Great kit for dimpling panels on vehicles or in hydraulic press.
For use with bolts or hydraulic press

Rank No. #18

UTVDISTRIBUTION Dimple Die Set 3 Piece 1/2" 3/4" 1" Bolt Together or Hydraulic Press USA Made

Made In The USA
Heavy Duty Case SAE 8620 Hardened Tool Steel Dimple Die Tools built to last.
Dies can be bolted together to dimple or placed in a hydraulic press.
Kit contains 1/2"-3/4" 1" Dimple dies
The original designer for metal fabrication specialists. Quality you can count on.

How Do You Buy The Best Dimple Die Eastwood?

Do you get stressed out thinking about shopping for a great Dimple Die Eastwood? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Dimple Die Eastwood, which is why we have assembled a comprehensive list of the greatest Dimple Die Eastwood available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Dimple Die Eastwood that you consider buying. Your questions might include the following:

Is it worth buying an Dimple Die Eastwood?
What benefits are there with buying an Dimple Die Eastwood?
What factors deserve consideration when shopping for an effective Dimple Die Eastwood?
Why is it crucial to invest in any Dimple Die Eastwood, much less the best one?
Which Dimple Die Eastwood are good in the current market?
Where can you find information like this about Dimple Die Eastwood?

We’re convinced that you likely have far more questions than just these regarding Dimple Die Eastwood, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Dimple Die Eastwood, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Dimple Die Eastwood. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Dimple Die Eastwood buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Dimple Die Eastwood currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Dimple Die Eastwood has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Dimple Die Eastwood?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Dimple Die Eastwood.
Customer Ratings: Number ratings grade Dimple Die Eastwood objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Dimple Die Eastwood.
Product Quality: You don’t always get what you pay for with an Dimple Die Eastwood, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Dimple Die Eastwood is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Dimple Die Eastwood information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Dimple Die Eastwood is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Dimple Die Eastwood of 2022 – Romance University

How Do You Buy The Best Dimple Die Eastwood?

Related Post: