18 Best E3D Hotend of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best E3D Hotend of 2022. Check our ranking below.

2,081 Reviews Scanned

Rank No. #1

E3D Prusa MK3 MK3S V6 HotEnd Kit

Fits MK3 and MK3S
Provides more reliability with retractions when using the MMU
Prusa heatbreak & thermistor
Maximum temperature: 285degC
Drop-in replacement

Rank No. #2

E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat

Rank No. #3

FYSETC Prus i3 Hotend MK3S+ J-Head Extruder Kit 24V 40W for 1.75mm Direct Filament Compatible with Prus i3 MK3/MK3S/MK3S+ and Other E3 V6 Remote Printhead Printer with Silicon Cover and 0.4mm Nozzle

Fits: A Good hotend replacement or 3D printer accessory for DIY Prus i3 MK3/MK3S/MK3S+ model or other machines with E3 V6 Remote Extruder. Not fit for Mk2(MK2 uses 12V)
Easy to install: comes with a full set, and semi-assembled, need you to complete the assembly then a Drop in All Metal Conversion Kit for your printer. Note: After installing, Heat the printhead to about 150 degrees/302℉, then tighten the nozzle with a wrench to avoid 3d printing material oozing. 0.2mm distance between 0.4 brass nozzle and heater block will be OK
Kit includes: A semi-assembled part( V6 All metal heatsink+ Bimetal Throat+ High quality brass nozzle+ Aluminum V6 Heater Block) x high temperature protective silicone cover x 24V 40W cartridge heater x specific 104NT thermistor x extra V6 stainless steel throat. The silicone sock's color is random, maybe yellow or blue
Upgrade Heater Thermistor: 24v 40W cartridge Heater is made of 304 stainless steel material,Diameter: 6mm; Length:15mm, Conveniently pre-wired with 1 meter long high temperature resistant wire; specific 104nt thermistor with cable 1meter long, Much more Accurate and Stable than the original. Temperature measurement head cylinder diameter 3mm, length 12mm, can be used with the heating block that support the thermocouple
High Quality: Semi-assembled hotend adopts copper- titanum alloy all-metal throat, can be applied to high temperature filament printing; the quality CNC heating block with good thermal conductivity and high precision

SaleRank No. #4

BIQU E3D Panda Revo Hotend Compatible with Bambu-Lab X1C, with E3D Rapid Change Revo Nozzle, Drop-in Upgrade, High Flow Hotend up to 40mm3/s

【BIQU X E3D】Panda Revo is a hotend co-developed by BlOU and E3D for Bamboo Lab X1C 3D Printer. It integrates E3D RapidChange Revo ecosystem, ans is compatible with all Revo nozzles except Revo belt nozzle.
【Quick Change Nozzle】Nozzle change has never been easier if you have a Panda Revo hotend. It enables 30 seconds rapid nozzle change with bare hand at room temperature, no more tools are needed!
【High Flow up to 40mm3/s】With 0.4mm Revo HF nozzle and E3D 60w heatercore plus NTC100k thermistor, Panda Revo features a high flow up to 35-40mm3/s (depends on filament), meeting the need of high-speed and high flow printing.
【High Temperature Resistance】The equipped 60W Revo heatercore makes it possible for BIQU Panda Revo to heat up quicker while being safer with its positive temperature coefficient (PTC). And the hotend is high-temperature resistant up to 300°C.
【Easy Maintainance】Panda Revo is fully compatible with Bambu Lab X1C and is super easy to install. It won’t leak filament thanks to the 2-in-1 design of Revo nozzle. Panda Revo will also be a cost-effective choice for you since you only need to replace the nozzle instead of a whole hotend when the hotend is clogged or throat damaged.

Rank No. #5

E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series (0.6mm)

High Flow Performance: Enhance your Bambu Lab X1 and P1 series printers with a 60% increase in volumetric flow rate, ensuring more consistent and reliable extrusion at the same speeds or the option to push the slicer’s flow rate limit for maximum performance.
Smooth & Durable: Featuring E3D’s advanced E3DLC coating, this hotend is built to resist abrasions and reduce plastic build-up, providing a non-stick surface ideal for printing with fiber-filled materials.
Effortless Upgrade: Enjoy a drop-in replacement that requires no modifications to your mount or part cooling. Simply reuse your existing temperature sensor and heater pads for quick and easy installation.
Optimized for Fiber-Filled Filaments: The enhanced durability and smooth extrusion of this hotend make it perfect for high-performance 3D printing, including with tough composite materials.
Broad Compatibility: This E3D High Flow HotEnd is compatible with Bambu Lab’s X1, X1 Carbon, P1S, and P1P models, offering an easy upgrade for multiple printer configurations.Please note: this kit does not include any electric components.

Rank No. #6

All-Metal V6 J-Head Hotend Extruder Hotend 1.75mm kit for 3D Printers (12V) 0.4mm Nozzle

Compatible with RepRap 3D Printer Extruder Hotend compatible with all E3D V6 1.75mm / 0.4mm 3D Printer
12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
Nozzle and hose connect seamlessly, preventing material from leaking and blocking.
Component structure, easy to install and maintain

Rank No. #7

POLISI3D 500℃ High Temperature Plated Copper Heater Block Compatible with PT100 Cartridge Sensor Version V6 Hotend Titan Aero Extruder Prusa i3 MK3 MK3S 3D Printer (Copper)

Size: 23x16x11.5mm. Material: Copper; It is machined with very high precision and high quality
Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.
This heater block is for OD 3mm cartridge temperature sensor
This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing. In addition to high temperature performance this Block have an advanced nickel based plating
Package: 1piece

SaleRank No. #8

CHC V6 Hotend Ceramic All-Metal: Compatible with e3d V6 hot end Full kit Voron 0.1 Voron 2.4 Prusa i3 Mini MK2 MK2S MK3/MK3S/MK3S+ (24V 60W)

Upgrade Ceramic heating core: better for rapid and precise temperature control, ensures consistent heating printing
High-quality: Copper and titanium alloys constructed heat sink, 3 times heat dissipation compared to old heat sinks
Quality Hardened Nozzle: Superior accuracy, 450C degree high temperature printing available and excellent wear resistance, enabling printing PLA ABS Carbon fiber PEEK etc
1.2 Meters Extended Cable: 24V 60W ceramic heater and 3950 100K thermistor, offering seamless compatibility with many 3D printers
Easy installation: Extruder hotend straightforward install on Voron V2.4 Pursa V6,or do modified on Ender 3 series printers

Rank No. #9

ATNSINC for E3D V6 Hotend Kit, 3D Printer All Metal Mount Fixed Blocks, Remote Short Direct Heat Sink 1.75mm Compatible with E3D V6 hotend, and Nozzle/Heater Block for Feeding 3D Printer Extruder

Package included: 1pcs Long Heat Sink Aluminum M7+1 set metal mount including screws kit+1pcs Copper alloy heating block+1pcs 0.4mm nozzle+1pcs Stainless Steel Heatbreak.
【Metal mount including screws kit】Made from 6061 Aluminum, Blue Anodized surface treatment, excellent machining. Good adapter mout for Upgrade V6 hotend hotend Dragonfly BMS BMO and other V6 groovemout hotend to creality 3D Printer with no Z stop height adjustment.
【Remote Heatsink Radiator For E3D V6】The heat-sink perfect used for M7 thread V6 heatbreak; Suitable for 1.75mm filament V6 remote radiator; Compatible: for V6 hotend interfaces Prusa I3 MK3/MK3S Titan Extruder DDG Extruder.
【Copper alloy heating block for E3D V6】 Copper block is specifically designed for ultimate high temperature performance, which can reach 500℃ and the thermal conductivity is greatly increased, very suitable for high-temperature applications and printing at work Daily consumables such as PLA and ABS are perfectly matched.
Come with Stainless Steel Heatbreak All Metal 1.75MM Filament For V6 Hotend and 0.4mm nozzle for E3D.

Rank No. #10

E3D V6 Hotend Full Kit Extruder Parts 1.75mm 12V Bowden/RepRap 3D Printer Accessories 0.4mm Nozzle

Products Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall

Rank No. #11

Genuine E3D V6 Full - Direct - 24V- Hotend, Compatible With The Full V6 Ecosystem And Many Other 3D Printers (M6 Thread)

Rank No. #12

hardcore lab CHC V6 All-Metal Hotend Ceramic: Compatible with Voron 0.1/2.4 Prusa i3 Mini/MK2/MK2S/MK3/MK3S/MK3S+/e3d V6 hot end Full kit

Package included: 1 pcs Ceramic core kit V6 Bingo Hotend set 24V 60W with 1.3 m white thermistor extension cable and 1.2m red heater extension cable
Compatible for: this hotend fit for ENDER-3 CR10 MK2S MK2.5S MK3 3d Printer
High Speed Printing: 22 ℃-280 ℃ heating time about 50 seconds uniform heating, and the Ceramic heating tube maximum temperature is 300 ℃
Advantage of the extruder hotend: The 3d printer hotend offers reliable and consistent printing performance, suited for a wide range of applications. With its precise temperature control, it ensures accurate printing results every time
This v6 hotend can work with different sizes of nozzle: 0.2 mm 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.8 mm 1.0 mm nozzle

Rank No. #13

QCCAN for E3D V6 Hotend Remote Short Direct Heat Sink 1.75mm, Bimetal Heatbreak, and Nozzle/Heater Block for Feeding 3D Printer Extruder

Remote Heatsink Radiator For E3D V6 : The heatsink perfect used for M7 thread V6 heatbreak; Suitable for 1.75mm filament V6 remote radiator; Compatible: for V6 hotend interfaces Prusa I3 MK3/MK3S Titan Extruder DDG Extruder.
Bimetal Heatbreak: Combined with two components, Made from titanium alloy TC4 + plated copper, real bimetal heatbreak. Two components with different thermal conductivity to improve the heat dissipation efficiency. Smooth reduce blocking, High temperature resistance, Slow heat conduction.
Copper alloy heating block for E3D V6: copper block is specifically designed for ultimate high temperature performance, which can reach 500 °C and the thermal conductivity is greatly increased, very suitable for high-temperature applications and printing at work Daily consumables such as PLA and ABS are perfectly matched.
Come with Stainless Steel Heatbreak All Metal 1.75MM Filament For V6 Hotend and 0.4mm nozzle for E3D.
Package Included: 1pcs Long Heat Sink Aluminum M7+1pcs Bimetal Heatbreak+1pcs Copper alloy heating block+1pcs 0.4mm nozzle+1pcs Stainless Steel Heatbreak

Rank No. #14

Revo Voron E3D RapidChange All-Metal Hotend kit Single Nozzle Kit Compatible with Voron 1/2.4/0.1 / Switchwire/Trident/Legacy (REVO-VORON-175-24V-AS)

The Ideal Choice: Smaller, lighter and redder, the Revo Voron is the HotEnd of choice for Voron 3D printers, which uses the smallest radiator we have produced to date, weighing just 25 grams, and has a more flexible motion system. Revo Voron is designed for direct drive Settings and is fully compatible with the Revo ecosystem you can enjoy all the benefits of E3D's RapidChange Revo system
RapidChange Nozzles: Revo Voron is compatible with Revo nozzles, which allow for quick, finger-tip changes at room temperature. Revo nozzles form a closed system of nozzle and heatbreak, which prevents unwanted material discharge. Assembly is incredibly easy
Improved Performance: The Revo Voron uses a Revo HeaterCore, an innovative hotend heater and sensor architecture. It reaches temperature much faster than a traditional aluminium heating block. Thanks to the positive temperature coefficient (PTC), the Revo HeaterCore works more safely than comparable solutions on the market
Red Anodised Heatsink：With its red anodised heat sink to complement your Voron accented parts., the hotend fits perfectly with Voron 3D printers. Heatsink is GPL V3 certified
Compatible with: Voron 1/Voron Trident/ Voron Switchwire/ Voron 2.4/ Voron Legacy/ Voron 0.1. This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer

Rank No. #15

Genuine E3D Hotend Thermistor Cartridge Replacement

Direct replacement of cartridge type thermistor in E3D hotends.
A custom made thermistor encapsulated into an easy to use cartridge package.
Genuine Semitec 104GT thermistors used.
Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)

SaleRank No. #16

BIQU E3D Panda Revo Hotend Compatible with Bambu-Lab X1C, with E3D Rapid Change Revo Nozzle

[High Flow Rate] BIQU Panda revo uses 0.4mm revo HF nozzle, E3D 60w heater, and NTC1000 thermistor, with a high flow rate of 35-40m3/s (depending on the filament), meeting the needs of high-speed and high flow printing
[High Temperature Resistance and Fast Temperature Rise] Panda revo is suitable for a variety of consumables. PC consumables can reach a temperature of 300 ℃ and are equipped with a 60W heater, saving waiting time and providing a faster experience of panda revo
[BIQU×E3D] Panda revo is a hotend compatible with the Bambu-Lab X1C 3D printer, jointly developed by BIOU and E3D. It integrates the E3D RapidChange Revo system and is compatible with all revo nozzles except for the revo belt nozzle
[Easy to Maintain] Panda revo installation is fast and convenient. Thanks to the integrated design of the Revo nozzle, it will not leak the filament. One time investment, lower maintenance costs. When the nozzle is clogged or damaged, only the nozzle needs to be replaced, without the need to replace the whole hotend
[Quick Nozzle Replacement] If you have a panda revo, nozzle replacement has never been so simple. It can quickly replace the nozzle by hand at room temperature for 30 seconds without the need for tools

Rank No. #17

3D Printer All Metal Mount Fixed Blocks Compatible with E3D V6 hotend

Made from 6061 Aluminum, Blue Anodized surface treatment, excellent machining. Good adapter mout for Upgrade V6 hotend hotend Dragonfly BMS BMO and other V6 groovemout hotend to creality 3D Printer with no Z stop height adjustment
There are two M3 holes at top for adding the wires printed organizer bracket and two m3 holes aside for adding the printed fan shrouds. Both printed wire organize bracket and fan shrouds are NOT included here, you can print them by yourself ( you can download the file by searching "4117436" on thingiverse )
Notes: Does not include fans, shrouds, or strain relief.
Package included: 1 set mount including screws kit.

Rank No. #18

Revo Six E3D RapidChange 4 Nozzle Assembly Fully Loaded Kit Replacement for the E3D V6 Hotend 1.75mm (REVO-SIX-175-24V-AS-FL)

New Upgrade & Perfect Fit: Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print
Ready for Revo: Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today
Enhanced Performance: Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium HeaterBlock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway
Efficient Heat Dissipation: An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd, More efficient heat dissipation

How Do You Buy The Best E3D Hotend?

Do you get stressed out thinking about shopping for a great E3D Hotend? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching E3D Hotend, which is why we have assembled a comprehensive list of the greatest E3D Hotend available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for E3D Hotend that you consider buying. Your questions might include the following:

Is it worth buying an E3D Hotend?
What benefits are there with buying an E3D Hotend?
What factors deserve consideration when shopping for an effective E3D Hotend?
Why is it crucial to invest in any E3D Hotend, much less the best one?
Which E3D Hotend are good in the current market?
Where can you find information like this about E3D Hotend?

We’re convinced that you likely have far more questions than just these regarding E3D Hotend, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for E3D Hotend, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible E3D Hotend. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an E3D Hotend buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available E3D Hotend currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of E3D Hotend has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an E3D Hotend?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your E3D Hotend.
Customer Ratings: Number ratings grade E3D Hotend objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their E3D Hotend.
Product Quality: You don’t always get what you pay for with an E3D Hotend, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an E3D Hotend is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining E3D Hotend information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding E3D Hotend is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best E3D Hotend of 2022 – Romance University

How Do You Buy The Best E3D Hotend?

Related Post: