18 Best Elegoo Nano of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Elegoo Nano of 2022. Check our ranking below.

2,839 Reviews Scanned

Rank No. #1

ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.

Rank No. #2

Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

Rank No. #3

Mini Nano V3.0 ATmega328P 5V 16M Microcontroller Board w/USB Cable for Ar duino IDE

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

Rank No. #4

KYBER 3X Nano V3 ATMEGA328p Type C

for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes)
PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces
Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered
Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze

Rank No. #5

HiLetgo 3pcs Nano V3.0 ATmega328P CH340G 5V 16M Mini USB Micro Controller Board Development Board with PIN Headers Pin Unsoldered

Using Atmel Atmega328P-AU MCU, Support ISP download,using the same chips ATmega328P and CH340 with the official version.
Support USB download and Power.
Support for external 5V~12V DC power supply, Support power supply by 9V battery.
Nano V3.0 ATMEGA328P improved version with 3pcs pin headers. No welding needed.

Rank No. #6

OSOYOO 3pcs LGT Nano for Arduino Nano Compatible with ATmega328p Chip Nano Board with USB-C Interface

You need to Install Arduino Hardware Support Package for LGT-NANO from lesson 1 in OSOYOO website before using.This OSOYOO LGT-Nano board does all things that you're familiar with: 8 channels of 12-bit ADC, 6 PWM pins, 14 DIOs as well as hardware serial connections Rx and Tx. Running at the maximum main frequency of 32MHz and 5V.
OSOYOO LGT-NANO is based on the chip LGT8F328P instead of Atmega328P and redesigned to produce a compatibility board that can be compatible with Arduino NANO.Support DIY Mode which could offer wonderful experience when using.
LGT8F328P is a chip compatible with AVR and Atmega328P chips. we offer package for Arduino IDE that supports OSOYOO LGT-Nano before we can start programming with the Arduino IDE.
The OSOYOO LGT-Nano can be powered via the USB-C connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage.You can use USB-C to USB-C cable and USB-C to Type-C cable connect LGT nano v1.1 and computer.
You can use the official Uno board for arduino or LGT-Nano board (based on lgt328p) as the ISP (programmer) to burn the bootloader for the LGT8F328P chip, or directly use the LGT8F328P dedicated ISP downloader to burn the bootloader.

SaleRank No. #7

ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA Nano

Unleash Your Inner Maker with Our Upgraded Sensor Modules Kit - Packed with 37 essential components for your arduino projects!
Say Goodbye to Useless Modules - Our kit includes only the best, like the GY-521 accelerometer, LCD1602 screen, and DS1307 real time clock module, etc!
Learn with Ease - Our upgraded tutorial is designed specifically for UNO R3, MEGA R3, and NANO - Plus, we've included a CD and listing paper for your convenience!
100% Compatible with Arduino Official IDE and STM32 - So You Can Get Started Right Away!
Perfect for Beginners and Pros Alike - Just remember, basic electronic knowledge is required, but we're here to help you every step of the way!

Rank No. #8

ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested.
Lcd1602 module with pin header (not need to be soldered by yourself)
This is the upgraded starter kits with power supply module, 9V battery with dc
High quality kit with UNO board, compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

Rank No. #9

ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit with Tutorial Compatible with Arduino IDE

The MEGA2560 complete starter kit with more than 200pcs components, premium quality for Arduino kit
Free PDF tutorial in the CD (more than 35 lessons).
LCD1602 module and GY-521 sensor module with pin header ( no need to solder by yourself)
Nice package with clear listing and surprise including a nice small box to keep the widget such as LED , IC , buttons , diodes ,etc.
We have always cared about the customer experience and improve the product function details.

Rank No. #10

2-Pack Nano Board, Aideepen V3.0 Nano ATmega328P CH-340 Development Board Without Cable Mini USB Port with PIN Headers Pin Unsoldered

【Nano V3.0】Support ISP download,Using Atmel Atmega328P-AU MCU.
【CH-340 chip】not FT2322,greatly reduces the cost of the module.
【MINI USB port】V3.0 Nano ATmega328P Development Board Without Cable,MINI USB port with PIN Headers Pin Unsoldered.
【Power】Support USB download and Power,Support for external 5V ~ 12V DC power supply.
【Why choose us】You can use it with our development board ASIN B0788MLRLK,let your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us.

Rank No. #11

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P, Type-C Connection Compatible with Arduino Nano V3.0

The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Support for external 5V~12V DC power supply, Support power supply by 9V battery.
The Nano is using the chips ATmega328P and CH340, Replace FT232RL
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces
Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed.

Rank No. #12

Arduino Nano Every (Single Board)

Small (48mm x 18mm), robust and powerful board Based on the ATMega4809 AVR processor
Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte.
Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
Power supply architecture based on a high efficiency DC-DC converter allows powering the board at up to 21V and to drive output peripherals with up to 950mA without overheating.
Get started in minutes with thousands of sketches available in open source

Rank No. #13

Arduino Nano Every with Headers [ABX00033]

Small (48mm x 18mm), robust and powerful board Based on the ATMega4809 AVR processor
Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte
Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano.
Power supply architecture based on a high efficiency DC-DC converter allows powering the board at up to 21V and to drive output peripherals with up to 950mA without overheating.
Get started in minutes with thousands of sketches available in open source.

Rank No. #14

ELEGOO 6PCS 170 tie-Points Mini Breadboard kit for Arduino Proto Shield Distribution Connecting Blocks

Six colors : red, blue, yellow, green, white and black.
With self-adhesive tape on the back, make it easy to stick on the Prototype Shield.
Everything is shipped in a well-designed package wrapped with thermoplastic film
We have always cared about the customer experience and improve the product function details.

Rank No. #15

AITRIP for Arduino Nano V3.0, Nano Board CH340/ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 With1 Cable)

The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Comes with 3 packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed. You can download CH340 Driver from download link in the product description below. also it has 1 cable
Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space.
USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27); The power source is automatically selected to the high voltage source

Rank No. #16

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html; http://www.wch-ic.com/download/list.asp?id=127 (windows); http://bit.ly/2pMF4in.
If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.

Rank No. #17

2-Pack Nano V3.0 Board, Aideepen Nano V3.0 ATmega328P-MU 5V 16M CH-340 chip Compatible with Arduino IDE (Without Cable)

【Nano V3.0】Support ISP download,8 Simulation input port: A0 ~ A7,14 digital input/output ports: TX, RX, D2 ~ D13.
【CH-340 chip】Replace FT2322,greatly reduces the cost of the module.
【MINI USB port】MINI USB port no welding needed.
【Power】Support USB download and Power,Support for external 5V ~ 12V DC power supply.
【Why choose us】You can use it with our development board ASIN B0788MLRLK,let your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us.

SaleRank No. #18

Weewooday 6 Pieces Nano Board V3.0 ATmega328P Without Cable Compatible with Arduino Nano V3.0 with Pin Headers Pin Unsoldered

What you will get: the package included 6 pieces of nano board V3.0 ATmega328P, each nano V3.0 ATMEGA328P improved version with 3 pieces of pin headers unsoldered
ATmega328P chips: using Atmega328P-AU MCU, support ISP download, using the same chips ATmega328P and CH340 with the official version
Mini nano board: this is a portable, complete, and breadboard friendly board; It has everything that compatible with Arduino has (electrically) with more analog input pins and onboard +5V AREF jumper
Input and output: each of the 14 digital pins on the Nano can be applied as an input or output; Some pins have special functions
USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27); The power source is automatically selected to the high voltage source

How Do You Buy The Best Elegoo Nano?

Do you get stressed out thinking about shopping for a great Elegoo Nano? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Elegoo Nano, which is why we have assembled a comprehensive list of the greatest Elegoo Nano available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Elegoo Nano that you consider buying. Your questions might include the following:

Is it worth buying an Elegoo Nano?
What benefits are there with buying an Elegoo Nano?
What factors deserve consideration when shopping for an effective Elegoo Nano?
Why is it crucial to invest in any Elegoo Nano, much less the best one?
Which Elegoo Nano are good in the current market?
Where can you find information like this about Elegoo Nano?

We’re convinced that you likely have far more questions than just these regarding Elegoo Nano, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Elegoo Nano, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Elegoo Nano. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Elegoo Nano buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Elegoo Nano currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Elegoo Nano has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Elegoo Nano?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Elegoo Nano.
Customer Ratings: Number ratings grade Elegoo Nano objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Elegoo Nano.
Product Quality: You don’t always get what you pay for with an Elegoo Nano, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Elegoo Nano is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Elegoo Nano information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Elegoo Nano is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Elegoo Nano of 2022 – Romance University

How Do You Buy The Best Elegoo Nano?

Related Post: