Skip to content

18 Best Geekworm Raspberry Pi 4 X825 of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Geekworm Raspberry Pi 4 X825 of 2022. Check our ranking below.

2,609 Reviews Scanned

Rank No. #1
Geekworm for Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only(Not Include Raspberry Pi)
  • Compatibility: X825 is compatible with Raspberry Pi 4 Model B (1GB/2GB/4GB/8GB) only, does not support Raspberry Pi 3; The version for Raspberry Pi 5 is X1100
  • Update: X825 V2.0 is the updated version from X825 V1.5. Metal case for X825 V2.0 is X825-C8. You can use X825 V2.0 to DIY your family NAS via RaspNAS or OpenMediaVault etc
  • X825 V2.0 can support up to 4TB 2.5 inch SATA hard disk drives (HDD)/solid-state drive (SSD), on theory the SSD capacity is no limit, but SSD thickness is limited by the standoffs height and it's case
  • User Manual: Google Geekworm Wiki and search X825 V2.0 for document and manual
  • How to power RPi4 and X825 V2.0: 5Vdc +/-5% ≥4A, Powered by Raspberry Pi 4 Type-C Power In port or DC jack of X825 V2.0; How to power RPi4 and X825 V2.0 and X735: 5Vdc +/-5% ≥4A, Powered by X735 Type-C or DC Jack Power In port
Rank No. #2
Geekworm X825-C8 (X825 V2.0) Metal Case+Power Switch+Cooling Fan Support X825 V2.0 2.5 inch SATA SSD/HDD Shield & Raspberry Pi 4 Model B & X735 Only(Not Include RPi4&X825 V2.0&X735&PSU&SSD&TF Card)
  • Overview: New X825-C8 metal case with power switch and cooling fan specially designed for X825 V2.0
  • Compatibility: X825-C8 is only compatible with X825 V2.0 and Raspberry Pi 4 and X735 power management board
  • Support Max 9.5MM thickness 2.5 inch SATA HDD / SSD installation
  • Packing List: 1 x X825-C8 Metal Case, 1 x Power Control Switch, 1 x 4010 Cooling Fan(with 4 pieces of screws), 1 x Mounting Screws Pack. Packing List is not include the Raspberry Pi 4, X825 Board and 2.5 inch SATA SSD/HDD
  • Important Note: The X825 V2.0 2.5" SATA Shield, X735 Power management board, Raspberry Pi 4 or HDD/SSD need to be purchased seperately
Rank No. #3
Geekworm Power Supply for Raspberry Pi 4, 20W 5V 4A USB C Power Adapter Type C Charger UL Listed Compatible with Raspberry Pi 4 Model B/Orange Pi 5/NASPi/DACPi/X-C1/X735/X728/X708/X703
  • Compatibility: USB-C Type C power adapter designed and tested for the Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version; Also support NASPi/X-C1/X825/X735/X728/X708/X703 expansion board/Retroflag PiStation Case/Orange Pi 5/5B/4B/3B/Pi 800/4 LTS/3 LTS/Zero 2/Zero 3
  • Power Input: 100-240V AC, 50-60Hz, 0.8A Max; Output: 5V 4A 20W; Cable length: 1.2 m / 47.24 inches
  • Raspberry Pi 4B Power Adapter with UL Listed Certification - UL Listed
  • Power Supply Functions: Over voltage protection; Under voltage protection; Over temperature protection; Over current protection; Short circuit protection
  • Packing List: 1x 5V 4A US Plug Type-C Power Supply
Rank No. #4
Geekworm for Raspberry Pi 4 Aluminum Case, Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar Compatible with Raspberry Pi 4 Model B Only-Black (P173)
  • Compatibility: Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB computer only, Model: P173
  • Passive Cooling Design: Don't need extra fan, heavy duty heatsink case with net weight up to 174 grams, with 4 built-in heatsink pillars for better heat dissipation
  • Easy Access to All Ports: Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface and TF Card slot is reservered
  • High Quality Metal Material: Made of high quality aluminum alloy material; Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation
  • Note: The Raspberry Pi 4 Model B , Micro SD card or power supply is not included in the packing list
Rank No. #5
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD
  • Important Note: Strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display), the system maybe unstable or not boot from the SSD; Must format the new SSD before use
  • Updated X862 V2.0 M.2 NGFF SATA SSD Shield can support up to 2TB m.2 NGFF SSD solid-state drive; Only supports Raspberry Pi 4 Model B; Supports M.2 NGFF 2280 SSD lengths ONLY; UASP supported only, not support TRIM
  • How to Power RPi 4 and X862: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port; How to Power RPi 4 and X862 V2.0 and X735: 5Vdc +/-5% , Powered by X735 Type-C or DC Jack Power In port; Recommend to use Geekworm UL listed 5V 4A Type-C power adapter
  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm Wiki search [Does_the_X825/X855_support_USB_boot]; If the SSD is not recoginzed or other issue, refer to X862 FAQ of Geekworm Wiki
  • Packing List: 1 x X862 V2.0 M.2 NGFF SATA 2280 SSD Shield, 1 x USB3.0 connector, 1 x Screws Pack Accessories
Rank No. #6
Geekworm for Raspberry Pi 4 Armor Case, Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only
  • Compatibility: Geekworm Raspberry Pi 4 armor case is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB computer only, Model: P122
  • Comes with Two GPIO Headers: With 2 pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable
  • About Signal Interference: Open case design, don't need to worry about affect wifi or BT signal
  • Easy Access to All Ports: All ports and slots of the P122 case can match with Raspberry Pi 4B perfectly
  • High Quality Metal Material: Reinforced aluminum material, lightweight and durable, long-lasting stainless
Rank No. #7
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Shield+X735 Power Management Board with PMW Cooling Fan Kit(Not Include Raspberry Pi 4)
  • √[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use.
  • √Updated X862 V2.0 M.2 NGFF SATA SSD Shield can support up to 2TB m.2 NGFF SSD solid-state drive;√ Only supports Raspberry Pi 4 Model B; √ Supports M.2 NGFF 2280 SSD lengths ONLY
  • √ UASP supported only for X862 V2.0; Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot);
  • √Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi.
  • √Power supply via X735 V3.0:Via Type-C or Micro-USB 5Vdc +/-5%,≥3A; Via DC 5521 Jack 6-30V width voltage input(Not support 5V power supply via DC jack)
Rank No. #8
Geekworm X1202 4-Cell 5V UPS Shiled for Raspberry Pi 5| Max 5.1V 5A Output|Wide 6-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection
  • Compatibility: Pi 5 UPS compatible with Raspberry Pi 5 8GB/4GB; Model: X1202; Matching Case is X1202-C1
  • Function: X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
  • How to Power: Power via USB-C port of X1202: 5Vdc 5A via USB Type-C OR Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A
  • User Manual: Goole Geekworm Wiki search X1202 and refer to user manual for hardware and software guide
  • 4-Cell Battery Supported: Battery length max 65.3mm, diameter max 18.5mm. (NOT include batteries, please prepare yourself)
Rank No. #9
Geekworm Raspberry Pi X735 V3.0 DC 6V-30V Width Voltage Input Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board Compatible with Raspberry Pi 5/4B/3B+/3B
  • Update: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input in 2022 and remove latching switch port; You must install shell script to enable the PWM fan to work since it need PWM signal to run
  • How to Power X735 V3.0:Via Type-C or Micro-USB 5Vdc +/-5%,≥3A; Or via DC 5521 Jack 6-30V width voltage input (Not support 5V power supply via DC jack)
  • Fully compatible with Raspberry Pi X825 V2.0, X862, X872/X873, X820, X850 to provide intelligent and safe power management; Reserved 40pin stackable header for add on boards
  • User Manual: Google Geekworm Wiki and search X735 to visit the software guide; Not tested on openmediavault or other third party OS
  • Note: Do not apply power to X735 via Type-C or Micro-USB and via DC 5521 Jack 6-30V at the same time
Rank No. #10
Geekworm for Raspberry Pi UPS, X728 (Max 5.1V 6A) UPS & Power Management Board with AC Power Loss Detection|Auto Power On|Safe Shutdown|Battery Capacity Reading|Low Battery Auto Shutdown|Buzzer
  • Function: X728 provides 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software,Battery capacity reading, Low battery automatic shutdown, Buzzer alarm, RTC
  • User Manual: Google Geekworm Wiki search X728 for manual; Matching metal case for X728 and Pi 4 is X728-C1
  • How to Power and Specifications: Power supply via Type-C socket : 5Vdc ±5%, ≥3A OR Via DC power jack : 5Vdc ±5%, ≥4A; UPS output : 5.1V ±5% Max 6A; UPS charging current: 2.3~3.2A; Terminal Battery Voltage : 4.24V; Recharge Threshold : 4.1V
  • Important Note: 1. Do not apply power to your RPi via the Micro USB or USB Type-C socket. 2. Do not use battery with built-in protection circuit. 3. Please make sure the polarity of battery is "+" to "+" and "-" to "-" and match with the "+" "-" mark on battery holder
  • Application: X728 reserves the 40-pin header to stack with other Raspberry Pi accessory boards for enhanced applications. The X728 can also be used with the X825/X828/X829 (2.5" HDD/SSD Shield) and X857/X862/X872 (MSATA/M.2 SSD shield) for safe data backup
Rank No. #11
Geekworm 4mm Thickness Copper Heatsink H402 for Raspberry Pi 4(Not Include Raspberry Pi 4)
  • Compatibility: Pi 4 copper heatsink compatible with Raspberry Pi 4 Model B 8GB/4GB/2GB/1GB; Model: H402
  • Copper Material: Copper material, heavy-duty copper heatsink, durable, long-lasting
  • Ultra thin design: 4mm thickness copper heatsink, heastsink net weight 59 g/0.13 lb
  • Open Design: Open heatsink design, don't affect wifi signal
  • Packing List: 1 x Copper heatsink H402, 1x Acrylic Plate, 1x Screws Pack accessories; Not include Raspberry Pi board
Rank No. #12
Geekworm X1206 4-Cell 5V UPS Shield for Raspberry Pi 5| Max 5.1V 6A Output|Wide 9-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection
  • Compatibility: Pi 5 UPS compatible with Raspberry Pi 5 16GB/8GB/4GB; Model: X1206; Matching Case is X1206-C1
  • Function: X1206 provides max 5.1V 6000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
  • How to Power(Select 1 from 3): 1. Power via X1206 5Vdc 5A USB-C port OR 2. Power via DC 5521 power jack of X1206: 9-18Vdc , ≥3A OR 3. 9-18Vdc Power via XH2.54 power in connector
  • User Manual: Goole Geekworm Wiki search X1206 and refer to user manual for hardware and software guide
  • 4-Cell 21700 Battery Supported: Battery length max 70.5mm, diameter max 21.1mm. (NOT include batteries, please prepare yourself!)
Rank No. #13
Geekworm 11mm Thickness Embedded Heatsink (P165-B) for Raspberry Pi 4, Armor Aluminum Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension
  • Compatibility: Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, embedded heatsink with 11mm thickness; Model: P165-B
  • Supports to cooling down the Raspberry Pi 4 board with Pi 4 expansion board(reserve the PoE port of Pi 4); Compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board
  • Recommend to use CPU thermal conductive grease: The theoretical value of the gap between the heatsink protrusions and the CPU, RAM and other chips of Pi 4 is 0mm; Strongly recommend to use CPU grease to get better heat dissipation
  • Only equipped with 4pcs M2.5x5+5 mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards
  • Supports the installation of 30mm fan(3010 or 3007 fan); Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved
Rank No. #14
GeeekPi SATA Storage for Raspberry Pi 4, 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield for Raspberry Pi 4 Model B ( Only for Raspberry Pi 4B )
  • Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board;X825 Case,please refer to ASIN: B093WYWVRX; X825 Power supply:B07YJDS71K
  • Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD .
  • OS compatiable: All Raspberry Pi operating systems;USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
  • Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack;Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included
Rank No. #15
Geekworm Case for Raspberry Pi 4, Universal HAT Size Pi Case DIY Kit, Protective Acrylic Case for Pi 5/4B/3B+/3B/2B/B+ and Pi Hat Expansion Board
  • Compatibility: It is a perfect acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 5/Raspberry Pi 4 Model B/ Pi 3 Model B plus / Pi 3 Model B+/ Pi3 Model B / 2B / B+ mother board together
  • This is protection solution for non-standard boards running boards on top of the raspberry pi, but please note, this case is only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need
  • Compatible with Raspberry Pi 5/Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X708/X728/X862)
  • Packing List: 1 x Acrylic Case; 1 x Pack of Screws; Note: The Raspberry Pi or the expansion board is not included
  • For the installation, please refer to [Installation Guide] in the product description
Rank No. #16
Geekworm X1201 Ultra-Thin 5V UPS Shield for Raspberry Pi 5 |Max 5.1V 5A Output| Auto Power On|Safe Shutdown|Power Loss Detection
  • Compatibility: Pi 5 UPS compatible with Raspberry Pi 5 8GB/4GB SBC; Model: X1201; Matching metal case is X1201-C1
  • Function: X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection
  • How to Power: Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; Do not apply power to Raspberry Pi 5 via the Type-C USB socket
  • User Manual and Low Voltage Warning Solution: Google Geekworm Wiki and search X1201; Refer to the software guide on X1201 WiKi to Edit the EEPROM configuration to solve the Low Voltage Warning issue
  • Versatile and Ultra-thin Design: X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi 5 accessory boards for enhanced applications
Rank No. #17
Geekworm X1202 4-Cell 5V UPS Shiled+X1202-C1 Metal Case for Raspberry Pi 5| Max 5.1V 5A Output|Wide 6-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection
  • Compatibility: Pi 5 UPS compatible with Raspberry Pi 5 8GB/4GB/2GB/1GB; Model: X1202; Matching Case is X1202-C1
  • Function: X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
  • How to Power: ✓Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A; OR ✓Power via USB-C port of X1202: 5Vdc 5A via USB Type-C
  • User Manual: Google Geekworm Wiki search X1202 and refer to user manual for hardware and software guide
  • Raspberry Pi 5 UPS Case: Metal Case for Raspberry Pi 5 & X1202 UPS, support active cooler and Top PCIe board installation, Model: X1202-C1
Rank No. #18
Raspberry Pi 4 Model B (4GB)
  • More Powerful Processor, Richer Multi-Media Capability, Faster Networking
  • In additional to the official USB Type-C cable, Pi 4B V1.2 now supports more other USB Type-C cables
  • Relocates the WLCSP SD card voltage switch, to protect the Pi 4B better
  • Optimizes silkscreen printing, to minimize the soldering and bridging in manufacturing process

How Do You Buy The Best Geekworm Raspberry Pi 4 X825?

Do you get stressed out thinking about shopping for a great Geekworm Raspberry Pi 4 X825? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Geekworm Raspberry Pi 4 X825, which is why we have assembled a comprehensive list of the greatest Geekworm Raspberry Pi 4 X825 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Geekworm Raspberry Pi 4 X825 that you consider buying. Your questions might include the following:

  • Is it worth buying an Geekworm Raspberry Pi 4 X825?
  • What benefits are there with buying an Geekworm Raspberry Pi 4 X825?
  • What factors deserve consideration when shopping for an effective Geekworm Raspberry Pi 4 X825?
  • Why is it crucial to invest in any Geekworm Raspberry Pi 4 X825, much less the best one?
  • Which Geekworm Raspberry Pi 4 X825 are good in the current market?
  • Where can you find information like this about Geekworm Raspberry Pi 4 X825?

We’re convinced that you likely have far more questions than just these regarding Geekworm Raspberry Pi 4 X825, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Geekworm Raspberry Pi 4 X825, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Geekworm Raspberry Pi 4 X825. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Geekworm Raspberry Pi 4 X825 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Geekworm Raspberry Pi 4 X825 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Geekworm Raspberry Pi 4 X825 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Geekworm Raspberry Pi 4 X825?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Geekworm Raspberry Pi 4 X825.
  5. Customer Ratings: Number ratings grade Geekworm Raspberry Pi 4 X825 objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Geekworm Raspberry Pi 4 X825.
  7. Product Quality: You don’t always get what you pay for with an Geekworm Raspberry Pi 4 X825, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Geekworm Raspberry Pi 4 X825 is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Geekworm Raspberry Pi 4 X825 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Geekworm Raspberry Pi 4 X825 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: