18 Best Hantek 1008C of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Hantek 1008C of 2022. Check our ranking below.
2,185 Reviews Scanned
SaleRank No. #1
Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator
- 8-Channel Automotive Oscilloscope: A virtual oscilloscope that combines automotive diagnostic functions, general-purpose oscilloscope functions and a programmable signal generator
- Automotive Diagnostic Functions: More than 80 automotive diagnostic functions (Ignition/Sensor/Bus Detection/Actuator/Starting & Charging, etc.) come standard. Quickly diagnose the stability of automotive systems and make judgements
- Universal Oscilloscope Function: 8 analogue channels, 12 bits resolution, 4K memory depth, 2.4MSa/s real-time sampling rate; 20 automatic measurement modes, can be selected with one key to turn on or off, convenient and intuitive to read the signal measurement results
- Programmable Signal Generator with USB storage: 8 channels, LVTTL output level, 0-250KHz frequency range. Signal generator function to simulate crankshaft and camshaft signals
- The 8-channel automotive oscilloscope is easy to operate and suitable for electricians as well as technicians, hobbyists and electronics enthusiasts to learn basic circuit diagnostics, basic electronic equipment troubleshooting and repair of automobiles, home appliances and other electronic products. Can transfer signals through the USB 2.0 interface, easy to connect to Android devices such as tablets, smart phones and personal computers
SaleRank No. #2
Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator
- this auto diagnostic oscilloscope is with 8Channels, 2.4MSa/s Real-Time Sampling Rate
- EASY TO USE -- Installs the PC software and start to use without any other drivers;
- USB2.0 power supply + communication interface, plug and play, and support hot plugging.
- Hantek 1008C provides Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.);
Rank No. #3
Hantek 1008C+ 8CH Automotive Diagnostic PC Oscilloscope 2.4MSa/s USB 2.0 bandwidth 100K Program Generator
- 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.).
- Video Help Function, provides the video help of diagnostic which can be watching online
- The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data.
- Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
- Transmit signals through USB 2.0 interface plug and play, and no need extra power supply
Rank No. #4
Hantek 1008A/1008B/1008C PC USB virtual Oscilloscope 8CH Automotive Diagnostic Auto Scope/DAQ Generator 2.4MSa/s 4K Depth USB 2.0 Interface(Hantek1008C)
- 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.). Video Help Function, provides the video help of diagnostic which can be watching online,
- The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal. Transmit signals through USB 2.0 interface plug and play, and no need extra power supply;
- Function Selection:There are three functions of vehicle diagnosis, oscilloscope and signal generator, including 78 types of vehicle diagnosis function.
- One Button Screenshot:Save the current waveform and generate pictures. Storage location is optional and easy to find.
- Reference Waveform Over 80 types of of standard reference waveform inside and can be callout or close with one button. It is convenient to be compared.
SaleRank No. #5
Hantek 1008C 8CH PC USB Diagnostic DAQ Program Automotive Oscilloscope Generator Multifunction
- 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.).
- Video Help Function, provides the video help of diagnostic which can be watching online,
- The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data.
Rank No. #6
8Channel Diagnostic PC Digital Oscilloscope/DAQ/Programmable Generator 2.4MSa/s USB Bandwidth 100K Virtual Automotive Diagnostic Signal Oscilloscope Can Print,Data Storage,Waveform Record Hantek 1008C
- 🚗【8 channels oscilloscope for vehicle testing】Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.). Video Help Function, provides the video help of diagnostic which can be watching online,
- 🚗【The diagnostic result】can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal. Transmit signals through USB 2.0 interface plug and play, and no need extra power supply;
- 🚗【Function Selection】There are three functions of vehicle diagnosis, oscilloscope and signal generator, including 78 types of vehicle diagnosis function.
- 🚗【One Button Screensho】Save the current waveform and generate pictures. Storage location is optional and easy to find.
- 🚗【Reference Waveform】 Over 80 types of of standard reference waveform inside and can be callout or close with one button. It is convenient to be compared.
SaleRank No. #7
withUtrade Hantek HT30A Heavy Duty Auto Test Lead 3M BNC to Banana Adapter Cable
- HIGH PROFESSIONAL---The BNC cable test leads is of high quality and professional high voltage auto test
- NOISE INTERFERENCE REDUCING---The BNC cable test leads adopts full shield, so that it can reduce the noise interference
- High quality and professional high voltage auto test lead
- A kind of special line for assisting automobile measurement instruments to test various types of signals
Rank No. #8
Hantek HT1008C 8 CH Automotive Lab Scope, HT30A/HT201/HT25 Included
- 78 types of automotive test functions, including ignition, sensors, Bus diagnosis, engine & charging curcuits
- 100kHz bandwidth, 2.4MSa/s, 8 channels, 12 bits resolution, 4K memory, 400V max input
- Data saved as txt/csv/rfc/xls/doc/jpg via USB 2.0 interface
- Comes with 1 HT25 secondary ignition probe
- Bonus kits inlude 1 HT201 attenuator and 1 HT30A
Rank No. #9
Attenuator 20:1 Passive Attenuation with 10MHz Bandwidth and 1.053M Input Res for Automobile Measurement (HT201)
- Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal. Bandwidth: 10MHz
- HT201 Attenuator designed for assisting automobile measurement
- Allow using oscilloscope measure fuel injector and primary ignition waveform. Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition
Rank No. #10
Hantek 1008C 8 Channels Automotive Diagnostic Equipment Oscilloscope
- 8 channels oscilloscope for vehicle testing
- Over 80 types of automotive diagnostic function
- Video Help Function
- The diagnostic result can be generated diagnostic report
- Transmit signals through USB 2.0 interface plug and play, and no need extra power supply
Rank No. #11
Hantek Qingdao Oscilloscope Hantek1008A/1008B/1008C PC/USB Virtual Oscilloscope 8CH Automotive Diagnostic Auto Scope/DAQ Generator 2.4MSa/s 4K Depth(Hantek1008C)
- 8 channels oscilloscope for vehicle testing.
- Over 80 types of automotive diagnostic functions
- The diagnostic result can be generated diagnostic report
- Supported to record waveform for a long time
- Transmit signals through USB 2.0 interface plug and play
Rank No. #12
Hantek Oscilloscope Hantek1008A/1008B/1008C PC USB Virtual Oscilloscope 8CH Automotive Diagnostic Auto Scope/DAQ Generator 2.4MSa/s 4K Depth(Hantek1008C)
- 8 channels oscilloscope for vehicle testing.
- Over 80 types of automotive diagnostic functions
- The diagnostic result can be generated diagnostic report
- Supported to record waveform for a long time
- Transmit signals through USB 2.0 interface plug and play
Rank No. #13
Hantek CC-650 AC/DC Max. 20 kHz 20mA to 650A DC Current Clamp Meter Multimeter with BNC Connector
- AC/DC frequency range: Up to 400Hz;
- Effective measurement range: 20mA to 650A DC;
- Powerful circuit measurement and malfunction analysis;
- Motor drive of frequency converter (or other electronics) measurement;
- Powerful electronics equipments measurement;
Rank No. #14
Hantek HT30A+HT307 Set Auto Test Leads and Acupuncture Probe Set Oscilloscope Accessories for Automobile Measurement
- HT30A: A special line for assisting automobile measurement instruments to test various types of signals. which also can cooperate with a 20:1 attenuator.
- HT30A: 3M BNC to banana adapter cable, heavy duty auto test lead. Allowing the oscilloscope away form the car being tested or repaired and placed on the bench.
- HT307: This probe set is a back pinning, piercing and repairable probe. It is essential for probing today’s small, fragile connector.
- HT307: Using for piercing the insulation of wires to allow for automotive electrical measurements without causing damage to the wires. Additionally they can be used as pin-tip probes while working with small circuit boards.
- This oscilloscope accessories set suitable for auto measurement, it work better when used together, it meet your various demand of your oscilloscope test.
Rank No. #15
Hantek Tablet Oscilloscope 110MHz Bandwidth 250MSa/S 8M Storage Depth with 7" Touch Screen(TO1112/110MHz+2CH)
- Parameter: 2CH tablet oscilloscope, 110MHz bandwidth, 250MSa/s sampling rate, 8M depth storage; 8-bit vertical resolution, 5 trigger (Edge-triggered, Pulse Width, Video, Slope and Timeout Trigger);
- Multi-Touch Screen: 7” LCD more intuitive, touchable screen, more convenient; A user-friendly interface, satisfactory interaction experience; Adjustable brightness and sound; Set auto-lock time and shutdown time;
- Adjustable suspension bracket(free-hands), adapt it to your needs; design with anti falling and anti-seismic function to protect the device,sturdy and durable;
- Built-in detachable lithium battery (3.7V 2600mAh*2 in parallel), full power and extended endurance; support fast charging(with 18W power adapter) ;
- Application: Built-in multiple functions, like data storage, frequency meter, FFT spectrum analyzer, math operations, 42 measurements, XY mode, 5 trigger and so on; Suitable for automotive testing, laboratory courses,etc.
Rank No. #16
Hantek 6074BE Digital Oscilloscope 70MHz 1GSa/s 4CH USB Virtual Oscilloscope Diagnostic Tool
- Free software upgrading constantly, higher cost performance; Support USBXI, easy to operate.
- Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus.
- Diagnosis/Performer/Startup&Charge); USB 2.0 interface plug and play, and no need extra power supply.
- Support tablet PC, Support WIN10/ WIN8/WIN7.
- 4 isolated channels oscilloscope, 1GSa/s real time sampling rate, 2mV-10V/DIV high input sensitivity and large input range, 70MHz high bandwidth.
Rank No. #17
QDTimes USB Oscilloscope 1008A/1008B/1008C PC USB Virtual Oscilloscope 8CH Automotive Diagnostic Auto Scope/DAQ Generator USB 2.0 Interface(1008C)
- 1008A/1008B/1008C PC USB virtual Oscilloscope:8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.). Video Help Function, provides the video help of diagnostic which can be watching online,
- 1008A/1008B/1008C PC USB virtual Oscilloscope:The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal. Transmit signals through USB 2.0 interface plug and play, and no need extra power supply;
- 1008A/1008B/1008C PC USB virtual Oscilloscope:Function Selection:There are three functions of vehicle diagnosis, oscilloscope and signal generator, including 78 types of vehicle diagnosis function.
- 1008A/1008B/1008C PC USB virtual Oscilloscope:One Button Screenshot:Save the current waveform and generate pictures. Storage location is optional and easy to find.
- 1008A/1008B/1008C PC USB virtual Oscilloscope:Reference Waveform Over 80 types of of standard reference waveform inside and can be callout or close with one button. It is convenient to be compared.
Rank No. #18
Hantek 6074BC 4-CH Oscilloscope 70Mhz 1GSa 23-pc Set
- 4 analog channels, 1GSa/s sampling rate, 70MHz bandwidth
- Over 20 functions, including pass/fail test, trigger, dynamic cursor tracking, waveform record and replay
- Heat-resistant and scratch-proof compact case
- Compatible with Win 7/8/10, Android via H-scope/Openscope, Linux via Openhantek, and OSX through virtual box/machine
- Provides development library DLL with Labview/VC/VB development examples
How Do You Buy The Best Hantek 1008C?
Do you get stressed out thinking about shopping for a great Hantek 1008C? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Hantek 1008C, which is why we have assembled a comprehensive list of the greatest Hantek 1008C available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Hantek 1008C that you consider buying. Your questions might include the following:
- Is it worth buying an Hantek 1008C?
- What benefits are there with buying an Hantek 1008C?
- What factors deserve consideration when shopping for an effective Hantek 1008C?
- Why is it crucial to invest in any Hantek 1008C, much less the best one?
- Which Hantek 1008C are good in the current market?
- Where can you find information like this about Hantek 1008C?
We’re convinced that you likely have far more questions than just these regarding Hantek 1008C, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Hantek 1008C, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Hantek 1008C. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Hantek 1008C buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Hantek 1008C currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Hantek 1008C has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Hantek 1008C?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Hantek 1008C.
- Customer Ratings: Number ratings grade Hantek 1008C objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Hantek 1008C.
- Product Quality: You don’t always get what you pay for with an Hantek 1008C, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Hantek 1008C is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Hantek 1008C information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Hantek 1008C is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.