18 Best Ipcampower Poe Switch of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Ipcampower Poe Switch of 2022. Check our ranking below.
2,758 Reviews Scanned
- 24 POE PORTS W/ 2 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 26 Port switch in total. (24) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
- EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
- TOTAL POE WATTAGE BUDGET OF 250 WATTS - This is normally more than enough wattage to push atleast 24 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 250 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
- FANLESS QUIET DESIGN & SMALL FOOTPRINT - Only 13"x8"x1.75" in measurement, smaller than most other 24 Port POE switches. Fanless Quiet Design. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
- RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.
- POE POWERED 3 PORT 10/100 UNMANAGED POE SWITCH - This unique switch is powered by incoming POE power from your POE switch or POE injector. It has 1 POE input that passes POE and Data through to the 3 POE Outputs. Since it does not require traditional AC power, this gives the user the ability to install this POE switch anywhere without the need for a nearby power receptacle.
- POE AND DATA CABLE RUN EXTENDER - Not only does this act as a standard POE switch, it also gives you the ability to surpass the limitations of a standard 100 meter cable run. This unit can extend your incoming Data and POE transmission up to an additional 100 meters on all 3 output ports. Turn on the optional "Extend Mode" to boost the POE and Data Transmission on ports 2 and 3 to an incredible additional 250 meters (data rate will drop to 10 Mbps on these ports when enabled).
- OPTIONAL "VLAN" AND "EXTEND" MODE - There are 2 optional modes that can be activated by a dip switch on the unit. VLAN MODE: This isolates the 3 output ports from communicating and sending data to each other and each of these ports will only be able to communicate with the POE Input uplink port.
- POWERED BY INCOMING POE - This switch operates best with 30 watts of incoming POE, but can function at reduced capacity with lower wattage. It uses 5W for itself and channels remaining power to the 3 outputs. Compatible with standard POE types (802.3af/at/bt), utilizing max 30W. Output wattage budget is 25W total, shared across 3 ports (up to 25W per port).
- LOW PROFILE AND WALL MOUNTABLE - The unit is small and unassuming and can be conventiently installed on a flat surface or be wall mounted using the included wall mount ears. Size is only 8.25cm Wide (11.35cm Wide with mounts installed) x 5.5cm High x 2.4cm Deep
- POE INJECTOR IN COMPACT WALL PLUG DESIGN - Designed like a typical wall wart. Plugs directly into any USA style plug
- SMALL FOOTPRINT LOW PROFILE DESIGN - Reduce the amount of wiring and footprint that normally comes associated with other POE Injectors
- 30 WATTS OF POWER at 48V 802.3af - This will power any IP camera that accepts POE power. Most IP cameras require 15 watts or less with the exception of some PTZ's. In most circumstances, this will be more than enough power for your cameras
- POWER YOUR IP CAMERAS, IP PHONES OR ANYTHING ELSE THAT TAKES 802.3af STANDARD POE POWER - Even though this was designed for IP camera installations, you can still use it for a multitude of any other devices that take standard POE power.
- ECONOMICAL PRICE POINT WITH PROFESSIONAL PERFORMANCE - IPCamPower products are built to last. This device is no different. Its simple, cost effective, and reliable.
- Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender "Combiner" unit and a receiver "Splitter" unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done!
- Reduces cabling costs. Let's say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch or NVR, you can now just run 1. Works great for both new and existing installs. Easy and Cost Effective.
- Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this splitter set to make your installation much easier and avoid running another long cable.
- The Splitter Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. Full IP68 Rating gives this unit the ultimate weather protection and can directly be exposed to rain, sleet, snow, ice, and the sun.
- Simple plug n play installation. Works with all standard 802.3af/at POE switches and POE NVRs that use standard active POE. Works on most all brands POE Switches, Cameras and POE NVRs. Don't be fooled by other cheaper combiners on the market that only work on POE Switches. IPCamPower's Combiner works on all POE Switches, POE NVRs and POE IP Cameras and supports both Mode A and B POE making it the most flexible and compatible POE Combiner/Splitter on the market.
- UNPARALLELED POWER DELIVERY: One of the Most powerful multi-port POE injector on the market in terms of both speed and Power. Harness the exceptional capacity of up to 90 watts of 802.3bt POE power per port with a substantial total budget of 900 watts, adept for powering diverse devices, from POE lighting, PTZ cameras, Acces Control, and AV over IP devices, ensuring steadfast performance in the most power hungry setups.
- INNOVATIVE DUAL-ROW 24 PORT INJECTOR DESIGN: Transform your standard non-POE switches into potent power over Ethernet hubs with our distinctive dual-row configuration. Initiate the process by connecting to the upper row from your selected non-POE switch. This setup seamlessly facilitates the transmission of ultra-fast data to the lower row, which ingeniously injects robust, high-efficiency POE into your crucial devices, consolidating data and power delivery into a streamlined solution.
- INTELLIGENT POWER ALLOCATION: Empower your network with a device that's as versatile as it is powerful. Whether for high-demand POE devices or more delicate equipment like smaller IP cameras and phones, this injector intelligently discerns and distributes the exact amount of energy required. Advanced 802.3bt technology ensures seamless backward compatibility with 802.3af and 802.3at devices. This precision safeguards your devices from over powerin while providing a versatile solution compatible
- ULTRA-FAST 10G SPEEDS: Elevate your network with blazing-fast 10G data pass-through, ideal for POE-powered A/V equipment like SDVoE, ensuring smooth, high-quality performance for professional AV over IP applications. More than capable enough to handle all other standard type of POE equipment like IP Cameras, IP Phones, and POE Lighting.
- VERSATILE COMPATIBILITY: Designed for a wide range of POE devices such as IP Cameras, POE Lighting, and IP Phones, this injector doesn’t just power them; it provides ample bandwidth, robust construction, and backward compatibility, enhancing your network's overall efficiency. Rack Mountable (rack ears are included) 1U Space. Size: 17.25" W x 13.75" Deep x 1.625" High
- POE powered 21.5" 1080p Monitor - Runs off of POE (Power Over Ethernet) Power. Requires POE plus Switch or Injector that pushes at least 30 watts. 60 watts is recommended if utilizing the built in 12V DC Output. Free 60 Watt POE Injector Included.
- On Board Single Port non-POE LAN Connection. In addition to the POE input network connection, there is also a non-powered built in LAN connection that acts essentially as a single port unmanaged switch. Use this to extend your network and hook up any type of networkable device to it.
- Built in 12V DC 1 Amp Output - When powering the monitor via POE, you have the option to utilize the 12V DC Output to power any type of device that utilizes 12V power up to 1 amp. Use this to power cameras, small switches, LED Lights or anything else that runs off of 12V DC (make sure it uses less than 1 amp)
- USB power output opens up the possibility to use this other than just a CCTV monitor. Feel free to use this with the many USB powered HDMI media devices on the market. The possibility exists to use this monitor as a media displayer in retail scenarios.
- (2) HDMI & (1) VGA Connections. Built for 24/7 operation. (1) Mic Input. Built in Speakers. Audio Connection input. Stand Included. VESA Mount Compatible.
- Takes Incoming POE Power and Converts and Outputs 12V DC Power. Can be used with any standard POE Switch or POE NVR. Requires minimum of 15 Watts POE but suggested is atleast 17 Watts or greater. Does not work with the uncommon passive POE power.
- Has built-in Wireless Receiver to Receive a wireless signal from IPCamPower's battery operated light switch. Requires IPCamPower's model "REMOTESWTICH" to work.
- Easy programming (no networking involved). Has 3 different programmable modes that will tell the receiver to turn on/off the 12V DC output current to the light. #1) Light Switch Mode (Works like a typical light switch) #2) Constant Push Mode (Will only leave the light on when the REMOTESWITCH is held down) #3) Double Remote Mode - Requires one REMOTESWITCH to turn on the light and a seperate one to turn it off.
- Typically used as a component in IPCamPower's Simplified POE Lighting System. However it can used for any scenario in which you need to remotely turn on/off current to a 12V DC Powered Device. Maximum output current is 1.2 Amps at 12VDC when using a POE power supply that is pushing atleast 17 watts or greater.
- Up to 31 REMOTESWITCH'es can be programmed to 1 of these IPCP-WIPOERECEIVER's. Countless IPCP-WIPOERECEIVERS can be prgrammed into 1 IPCamPower REMOTESWTICH.
- 10 Ports: Includes 8 POE ports and 2 UpLink ports, 10/100Mbps rate. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc.
- High POE Power: Maximum support 120W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*
- Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration.
- Extend function: When turn on the extend mode, the POE port can be extended to 250 meter distances and 10Mbps speed, and ports are isolated from each other, improve the network safety.
- Widely Used: Small and compact size design. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
- 【1 in 3 out Outdoor PoE Extender】This 4 port waterproof gigabit PoE extender include 3 PoE out and 1 PoE in. It can provides PoE power to up to three PoE devices, 10/100/1000Mbps speed. Each PoE extender has an transmission distance of 330ft(100m).
- 【IEEE802.3af and IEEE802.3at】This 3 channel PoE extender works with all standard IEEE802.3af/at POE switches, POE injectors and POE NVRs. PoE voltage is 44-57V. The Max input is 30W, and the Max output is 30W. Each port can power standard PoE devices like IP phones, IP security, IP speakers, etc.
- 【VLAN and 3 Levels Cascade】Extra 330ft(100m) PoE+ data transmission can be extended through a YuanLey PoE repeater. And it supports 3 levels cascade, therefore, it can achieve PoE data transmission up to 1312ft with 3 PoE extender. Out Ports 1 - 3 support VLAN isolation, preventing data leakage, and increase network security.
- 【Unmanaged PoE Repeater】No setup is required, no power, just need a network cable to expand PoE network, plug and play. Supports automatic detection of devices and powers compliant standard PDs.
- 【Ideal For Outdoor Use】The unibody housing and seamless design is IP66 rated for water resistance and can withstand the harshest outdoor environments. Compact size supports wall mount mount, can be installed anywhere as needed. Order now and enjoy uninterrupted network connectivity, come rain or shine!
- Power Over Ethernet: The 10-Port PoE switch provides a reliable PoE solution featuring 8 PoE ports (10/100Mbps) and 2 Gigabit Ethernet uplink ports (10/100/1000Mbps). Compliant with IEEE802.3af/at standard, it can deliver up to 30W for each PoE port and has a total power budget of 120W for at most 8 PoE devices.
- Intelligent Power Management: This PoE switch features the power management mechanism, so when the total allocated power exceeds the power budget (120W), the lower priority PoE port will be powered off one by one until the total power is below the threshold that the PoE switch is capable of supplying, which ensures the high priority PoE port’s power supply and protects the device from power overload.
- Auto Detection of Adaptive Devices: The PoE switch will automatically detect whether the device connected to its ports is a PoE device and whether it needs to be powered. To avoid damage, it will not supply power to non-PoE devices.
- Plug and Play, Easy Set up: Reolink RLA-PS1 PoE switch works perfectly with your PoE cameras with only one Ethernet cable required. Easy to set up even for beginners. You can mount the PoE switch on the wall or desktop, perfect solution for a variety of environments.
- Designed to meet your different needs: The PoE switch can be directly connected to your NVR for higher reliability and security, or it can be connected to the same LAN as your NVR to support more features of your cameras. If you don't have NVR, you can also connect your PoE camera and router directly through the PoE switch.
- 【Flexible Full Gigabit 16-Port PoE Configuration】16x PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE power budget of 120W for high-speed connections.
- 【Extend Mode】Up to 250m data and power PoE transmission range under Extend Mode, ideal for surveillance system (Speed will be downgraded to 10 Mbps).
- 【Priority Mode】Support Priority mode for ports 1-4, guarantee high quality of video or voice data transmission.
- 【Isolation Mode】Support Isolation Mode to isolate broadcast storm, improve Lan security and data transmission.
- 【PoE Auto Recovery】The switch automatically detects and reboots the dropped or unresponsive PoE-powered devices without the need for manual monitoring or resetting (Configuration Required).
- 【Port and rate】This 6 port poe network switch includes 4 PoE+ ports (10/100Mbps) and 2 UpLink ethernet ports(100Mbps). The Uplink can support more bandwidth than 100Mbps port.
- 【55W Power Supply】 Support IEEE 802.3af/at. Total PoE power up to 55W, built-in power, each port up to 30W and 15.4W in the same time.**Please note: If your device support 24V passive PoE, not support IEEE802.3at/at 48v PoE, it will not be compatible**
- 【Plug and Play】 Support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use. It is an unmanaged ethernet network switch.
- 【250m and VLAN support】 When the extend and VLAN mode is enabled, single PoE port supports 250m transmission distances and 10Mbps speed. 1-4 ports support VLAN isolation, reduce network congestion, improve the network safety.
- 【Wide Applications】 Compact design. Temperature-resistant material. Bilateral heat dissipation. LED lights. Widely used in IP cameras, Wireless Access Point, IP Phone, Computer Networks, etc.. If you have any questions, please contact our official support, we will provide the best after-sales service.
- 8 Gigabit Ethernet ports
- 8 PoE ports with 62W total power budget
- Plus software with easy-to-use interface offers basic managed capabilities to configure, secure, and monitor your network
- Supports desktop or wall mount placement
- Industry-leading 3-year limited hardware warranty
- ⭐【Outside 5 Port PoE Switch】Includes 4x 10/100/1000 Mbps PoE ports and 1 Gigabit uplink. PoE port supports IEEE 802.3af/at and delivers up to 30 W of power per port for a total PoE power budget of 78 W.(please Note: Only 48V POE devices are supported).Uplink ports can provide more bandwidth and connect different devices such as routers, NVRs, etc.
- ⭐【Outdoor Waterproof Design】IP65 protection grade, with 4KV lightning protection design, can be used in harsh outdoor environment -10℃ to +55℃ (14℉ to 131℉).
- ⭐【One Key VLAN】 When the VLAN mode is enabled,1-4 port isolated from each otherbut communicating with the uplinkport to improve network security.
- ⭐【Unmanaged Switch】support power detection function, automatic detection of PD devices, compatible with non-POE devices to provide data connection, no software or configuration required, support automatic MDI/MDIX and non-blocking data forwarding.
- ⭐【after-sales service】 Every PoE switch is rigorously tested for reliability, quality, and performance. We supply a year warranty for whole products and lifetime technical support.
- 5 Gigabit Ethernet ports
- 4 PoE+ ports with 63W total power budget
- Simple plug-and-play setup with no software to install or configuration needed
- Supports desktop or wall mount placement
- Industry-leading 3-year limited hardware warranty
- ☑️【All Gigabit Ports】 Includes 4 Gigabit POE ports, 1 Gigabit UpLink Ethernet port, all ports up to 100/1000Mbps speed, has excellent network performance. The Uplink may be connected to a variety of network devices, including NVRs, routers, servers, and more.
- ☑️【78W High PoE Power】 Support IEEE 802.3af/at PoE power supply. The whole power is 78W, up to 30W per port. All ports support PoE, and support automatic detection, can connect POE and non-POE devices. Suitable for poe power supply for multiple devices.
- ☑️【Unmanaged Switch】Plug and Play, no configuration required, can be easy installed. Support wall mount and pole mount, all installation kits included. Flexibility to mount the YuanLey outdoor waterproof switch anywhere you need it.
- ☑️【One Key VLAN】 When the VLAN mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety.
- ☑️【Ideal For Outdoor Use】Perfect for rough weather conditions. One-piece molding shell and seamless design with an IP65 Waterproof rating, it's built to withstand the toughest outdoor environment. Plus, it offers 4KV lightning protection. Order now and enjoy uninterrupted network connectivity, come rain or shine!
- 20 Gigabit Ports: Includes 16 Gigabit POE+ ports, 2 Gigabit UpLink, 2 Gigabit SFP. The ethernet ports support 10/100/1000Mbps automatic adaptation. The 2 gigabit uplink can be connected to different networks or devices, such as routers, NVRs, etc. The 2 Gigabit SFP Port can be connected to single-mode or multimode SFP modules, and transmit more distance through optical fiber
- High POE Power: Maximum support 200W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*
- Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data link. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration.
- Extend Mode: When turn on, the 9-16 POE port can be extended to 250 meter distances and 10Mbps speed; Simultaneously enable the POE wachdog function to automatically monitor POE devices. the port will be restarted when drops, increasing reliability
- Widely Used: Small and compact size design. fanless, fiber sfp slot, durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction - 30-day Money-Back Guarantee with 1 Year Warranty
How Do You Buy The Best Ipcampower Poe Switch?
Do you get stressed out thinking about shopping for a great Ipcampower Poe Switch? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ipcampower Poe Switch, which is why we have assembled a comprehensive list of the greatest Ipcampower Poe Switch available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ipcampower Poe Switch that you consider buying. Your questions might include the following:
- Is it worth buying an Ipcampower Poe Switch?
- What benefits are there with buying an Ipcampower Poe Switch?
- What factors deserve consideration when shopping for an effective Ipcampower Poe Switch?
- Why is it crucial to invest in any Ipcampower Poe Switch, much less the best one?
- Which Ipcampower Poe Switch are good in the current market?
- Where can you find information like this about Ipcampower Poe Switch?
We’re convinced that you likely have far more questions than just these regarding Ipcampower Poe Switch, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Ipcampower Poe Switch, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ipcampower Poe Switch. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Ipcampower Poe Switch buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ipcampower Poe Switch currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Ipcampower Poe Switch has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Ipcampower Poe Switch?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Ipcampower Poe Switch.
- Customer Ratings: Number ratings grade Ipcampower Poe Switch objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ipcampower Poe Switch.
- Product Quality: You don’t always get what you pay for with an Ipcampower Poe Switch, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Ipcampower Poe Switch is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Ipcampower Poe Switch information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Ipcampower Poe Switch is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.