18 Best Jbtek 8 Channel Dc 5V Relay Module of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Jbtek 8 Channel Dc 5V Relay Module of 2022. Check our ranking below.

2,200 Reviews Scanned

Rank No. #1

JBtek 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED's for Relay output status

Rank No. #2

AEDIKO 8 Channel Relay Module DC 5V Relay Board with OPTO-Isolated Support High or Low Level Trigger

8 Channel Relay Module’s Path Can Be Triggered By High Level or Low Level Through Jumper Setting; Trigger Current of Opto-Isolator: 5mA
This 5V Relay Module is 8 Channel Isolated, Each Relay Can Individually Switch On/Off By An Opto-Isolated Digital Input
5V 8 Channel Relay Module Comes with High-Current Relay,Maximum Load: AC 250V 10A;AC 125V 15A ; DC 30V 10A
This Module Design With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
The Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled By a Wide Range of Microcontrollers Directly

Rank No. #3

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32

5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Rank No. #4

JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

Equiped with high-current relay, AC250V 10A ; DC30V 10A
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
Be able to control various appliances, and other equipments with large current
Application：Supports all MCU control, The industrial field, PLC control, Smart home control
Indication LED's for Relay output status

Rank No. #5

AEDIKO 8 Channel Solid State Relay Module Board DC 5V High Level Trigger with Fuse

5V Solid State Relays Per Channel 250V 2A; Output with Resistive Fuse 250V 2A; Stable Performance, Trigger Current only 2mA
Input Control Signal Voltage: 0V - 0.5V Low Stage (SSR OFF); 0.5V - 2.5V (Unknown State); 2.5V - 20V High State (SSR Active); SSR Output (Each Channel)
LED Indicator for Each Relay; Standard Interface that Can Be Controlled by the Microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) Directly
Anti-Reverse Power Function: The 8 Channels Solid State Relay is Closed When the Voltage Between the Trigger Terminal and the Negative Pole of the Power Supply is 0V or Close to 0V
Applications: 8 Channel Solid State Relay Module widely Used for PLC Automation Equipment Control, Industrial System Control, Internet of Things Control, Electronic Enthusiasts to Develop Experiments, All Kinds of Circuit Modification

Rank No. #6

DEVMO 8 Channel DC 5V Relay Module Board, (2PACK) Electrical Equipments 8-Ch Optocoupler Compatible with PIC AVR DSP ARM MCU PLC Smart Home Control Switch

5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A.
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control.

Rank No. #7

2Pcs 8 Channel 5V Relay Module High Low Level Trigger with Optocoupler Isolation Load 8 Ways Relay Switch Module DC 30V AC 250V 10A Home Intelligent Control Module

8 channel relay module uses genuine quality relay, normally open interfaces maximum load: AC 250V/10A, DC 30V/10A
Relay module using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA
The 8 way module can be high or low by a jumper setting trigger, the interface design of human nature, equipped with fixing screw hole, easy to install.
Dual trigger design, use a dedicated two-way driver IC, strong resist interference, use diode continued current to protect it.
The input and output are 5.08mm wiring terminals, wiring is more convenient, suitable for PLC control.

Rank No. #8

AEDIKO 4pcs DC 5V Relay Module 1 Channel Relay Switch Relay Board with Optocoupler Isolation Support High or Low Level Trigger

5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.

Rank No. #9

FainWan 2pcs 8 Channel DC 5V Relay Module with Optocoupler for UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Rasp-Berry Pi

5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current;Relay output maximum contact is AC250V 10A and DC30V 10A
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
Widely used for all MCU control, industrial sector, PLC control, smart home control.

Rank No. #10

HiLetgo 5V 8 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger

HiLetgo 5V 8 Channel Relay Module
the module voltage is 5V, 9,12 V, 24V
Using SMD OPTOCOUPLER isolation

Rank No. #11

Lystin 8 Channel DC 5V DC 230V Relay Module Control Board with Optocoupler for UNO R3 MEGA 2560 1280 DSP ARM PIC AVR TTL Logic STM32 Raspberry Pi

DC 5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current.
Equiped with high-current relay, AC250V 10A ; DC30V 10A.
Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
Indication LED's for Relay output status. Widely used for all MCU control, industrial sector, PLC control, smart home control.

Rank No. #12

Onyehn 2pcs 8 Channel DC 5V Relay Module with Optocoupler for arduino UNO R3 MEGA 2560 1280 PIC AVR DSP ARM STM32 Raspberry Pi

🌟8 Channel DC 5V Relay Module with Optocoupler
🌟Using high-current relay, AC250V 10A DC30V 10A
🌟Contact some independent wiring, safe and reliable
🌟Standard interface, can be extended in a variety of development board With fixed screw holes for easy installation
🌟Suitable for a variety of platforms such as 51/AVR/AVR/ARM

Rank No. #13

AITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)

Solid State Relay Module Board has been assembled, and electrical test passed
Led indicator for each relay
Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch)
Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON); SSR Output (each channel);
Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Rank No. #14

[2-Pack] DC 5V Relay Module 2-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger

【Control Devices】The 2-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
【Fault-tolerant Design】The relay will not operate even if the control line is disconnected.
【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Pi, MSP430, TTL logic etc).

Rank No. #15

Hosyond 6Pack 2 Channel DC 5V Relay Module with Optocoupler Relay Board for Arduino Raspberry Pi MEGA2560

The power supply voltage of the relay module is DC5V. The maximum output load is AC250V 10A and DC30V 10A.
The relay has a standard interface and can be directly connected to the microcontroller, which is convenient for wiring. Package contains 10 male to female DuPont wires.
High Level or Low Level Trigger. Pull in at low level and release at high level. The status indicator is on when it is pull in, and it is release when it is released.
The 2 channel relay interface board can directly control Arduino, AVR, PIC, ARM, PLC and other single-chip microcomputers, and can also control various high-current electrical appliances and other equipment.
Widely used in all MCU control, industrial fields, PLC control, smart home control.

Rank No. #16

SainSmart 8-Channel Relay Module

5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equipped with high-current relay, AC250V 10A ; DC30V 11A
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP432, TTL logic)
Indication LED's for Relay output status

Rank No. #17

2pcs 8 Channel DC 5V Relay Module with Optocoupler for R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 for Raspberry Pi Module

5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
Standard interface that can be controlled directly by microcontroller ( for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control

Rank No. #18

SunFounder 5V 8 Channel Relay Shield Module for Arduino R3 2560 1280 ARM PIC AVR STM32 Raspberry Pi 3, 2 Model B & B+

5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED’s for Relay output status
Size:14cm x 5.7cm x 1.7cm (5.51inch x2.24inch x 0.67inch)

How Do You Buy The Best Jbtek 8 Channel Dc 5V Relay Module?

Do you get stressed out thinking about shopping for a great Jbtek 8 Channel Dc 5V Relay Module? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Jbtek 8 Channel Dc 5V Relay Module, which is why we have assembled a comprehensive list of the greatest Jbtek 8 Channel Dc 5V Relay Module available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jbtek 8 Channel Dc 5V Relay Module that you consider buying. Your questions might include the following:

Is it worth buying an Jbtek 8 Channel Dc 5V Relay Module?
What benefits are there with buying an Jbtek 8 Channel Dc 5V Relay Module?
What factors deserve consideration when shopping for an effective Jbtek 8 Channel Dc 5V Relay Module?
Why is it crucial to invest in any Jbtek 8 Channel Dc 5V Relay Module, much less the best one?
Which Jbtek 8 Channel Dc 5V Relay Module are good in the current market?
Where can you find information like this about Jbtek 8 Channel Dc 5V Relay Module?

We’re convinced that you likely have far more questions than just these regarding Jbtek 8 Channel Dc 5V Relay Module, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Jbtek 8 Channel Dc 5V Relay Module, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jbtek 8 Channel Dc 5V Relay Module. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Jbtek 8 Channel Dc 5V Relay Module buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jbtek 8 Channel Dc 5V Relay Module currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Jbtek 8 Channel Dc 5V Relay Module has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Jbtek 8 Channel Dc 5V Relay Module?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Jbtek 8 Channel Dc 5V Relay Module.
Customer Ratings: Number ratings grade Jbtek 8 Channel Dc 5V Relay Module objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jbtek 8 Channel Dc 5V Relay Module.
Product Quality: You don’t always get what you pay for with an Jbtek 8 Channel Dc 5V Relay Module, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Jbtek 8 Channel Dc 5V Relay Module is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Jbtek 8 Channel Dc 5V Relay Module information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Jbtek 8 Channel Dc 5V Relay Module is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Jbtek 8 Channel Dc 5V Relay Module of 2022 – Romance University

How Do You Buy The Best Jbtek 8 Channel Dc 5V Relay Module?

Related Post: