Skip to content

18 Best Jetta Spark Plug Boot Removal Tool of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Jetta Spark Plug Boot Removal Tool of 2022. Check our ranking below.

2,860 Reviews Scanned

Rank No. #1
ABN Spark Plug Wire Puller & Install for Volkswagen & Audi, VW Spark Plug Tool Wire Puller Tool, Spark Plug Wire Tool
  • GET THE JOB DONE: The ABN | Spark Plug Wire Remover Tool makes changing spark plug connectors possible without removing the intake manifold or any fuel lines and rails; Easily fits on the end of the rubber boot to unlock/lock the boot and properly remove the plug wire without damage
  • FITS YOUR VEHICLE: For Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads); Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC); Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)
  • ACCESS DEEP SPARK PLUGS: Angled shaft allows access to deep plugs in hard-to-reach areas; 12.6-inch (32cm) overall length; 3.75” x 0.4” x 1.2” inch (9.5cm x 1cm x 3cm) handle, 9.25-inch (23.5cm) shaft, 2.2-inch x 0.8-inch (5.6cm x 2cm) boot end
  • EASY TO USE: No need to remove the intake – Simply push the spark plug boot removal tool down, turn, and pull; Perform spark plug change when engine is cold to prevent the heads from stripping; After pulling the plugs, we recommend applying lubrication to make the job easier; When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck
  • BUILT TO LAST: Handle constructed from hard plastic for comfort, less user fatigue, and more productivity; Shaft and boot end constructed from stainless-steel for maximum strength and longevity
Rank No. #2
EWK Spark Plug Boot & Wire Removal Tool, Ignition Coil Puller for VW Audi T10112
  • 【Work Smart】This spark plug boot removal Tool T10112 is a special tool for quickly remove the spark plug lead without destroying any component.
  • 【Time Saver】The angled shaft fits well into narrow plug cavity with no manifold dismantling needed, reach the plugs on cylinder #2 and #3 smoothly.
  • 【High Quality】Shaft and boot end are constructed from premium stainless steel for maximum strength and longevity. The ergonomically grip convenient to use.
  • 【Applications】Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC); Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD). *Not recommended for non-VW/Audi plug leads.
  • 【12+6 Month】Durable products backed by an extraordinary 12+6 months warranty.
SaleRank No. #3
EWK 17mm Mercedes Spark Plug Wrench Boot Puller for V6 V8 Engine Remove & Install M112 M113 Removal tool
  • 【Versatile Fit】Designed to fit Mercedes V6 & V8, M112 & M113 engines, this wrench is ideal for removing spark plug boots without causing damage to multiple Benz car models. Check the compatibility list to ensure proper fit.
  • 【Damage-Free】Safely remove spark plug boots without causing any damage to your vehicle's spark plugs and wires. Ensures efficient disassembly and worry-free repairs.
  • 【Unique Angle】The unique angle design allows effortless access to reach narrow spaces. Provides with the flexibility to replace spark plugs on a wider range of vehicle models.
  • 【Durable & Secure 】Made of forged steel with polished coating, providing excellent durability, wear-resistance, and corrosion protection. The 6-point box end design ensures a secure fit on hex fasteners.
  • 【12+6 Month】Durable products backed by an extraordinary 12+6 months warranty.
SaleRank No. #4
Enhon Spark Plug Pliers, Spark Plug Plier Boot Removal Tool, 45°Offset Plier Tool Spark Plug Remover, Remove Broken Spark Plug and Hard to Reach Spark Boots
  • Spark Plugs Removal Tool: designed to make spark plug removal easier, this spark plug wire extractor is a necessary tool for proper spark plug removal; Removes deep, hard to reach sleeves without damaging the wires; The 45 degree offset tips allow for a lower position to securely grip deep spark plug boot
  • Practical Design: a practical tool for professionals to easily loosen spark plug assemblies that are virtually impossible to remove, especially on vehicles that have not been routinely serviced and have years of grime buildup; This spark plug wire puller tool unscrews the most stubborn, toasted spark plug sheaths and manipulates delicate wires
  • Non Slip Handle Design: this spark plug boot extractor features a vinyl coated handle that won't slip out of your hand; The vinyl coating on the clamp grips the spark plug tightly without slipping, is frictionless, won't break metal or plastic surfaces, and won't pull out wires
  • Versatile Use: these spark plug pliers are efficient and practical not only as spark plug wire removal tools, but also for removing or disconnecting multiple sensors, connectors and terminals in automobiles and other electrical systems
  • Warm Tips: please wear gloves when using this tool and do not hesitate to contact us if you have any questions
Rank No. #5
QWOKR Spark Plug Wire Removal Plier Spark Boot Removal Pliers for Car
  • High Quality - Made of carbon steel, this Spark Boot Removal Pliers is safe, durable, cost-effective
  • Size - The opening of this plier is 5/8", which fits for spark plug wire boots avoiding damage.
  • Wide Usage - It is used to remove the spark plug high voltage wire, which is convenient and labor-saving. It can also be used in small spaces.
  • Ergonomic Handle - Anti-skid and ergonomic handle can save many of the power.
  • 100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!
Rank No. #6
Powerbuilt "L" Shape Spark Plug Boot Puller - Removal Tool for Spark Plug Boots - 648423
  • Made to be the most reliable tools in the market today
  • Tool solutions for most all situations
  • Built to exceed tool standards
Rank No. #7
Professional Spark Plug Removal Tool - 11" Extended O-Ring Nose Pliers with Anti-Slip Handle - Essential Car Spark Plug Boot Removal Tool
  • [Precision Specifications] - Our spark plug pliers boast an overall length of 11 inches, with a minimum opening width of 0.63 inches (5/8 inch) and a maximum opening width of 1.9 inches. The extended design effortlessly navigates tight and intricate spaces, enhancing your maintenance efficiency!
  • [Efficient Disassembly Tool] - As a professional automotive tool, it excels in pulling and disassembling various small components on the vehicle body. From spark plug high-voltage wires to covers, sheaths, hose clamps, vacuum pipes, fuel pipes, and heater hoses, it brings unparalleled convenience to your tasks.
  • [Premium Material] - Crafted from high-end carbon steel, our spark plug boot removal tool surpasses ordinary disassembly tools in solidity, tensile strength, and durability. The internal serrated design ensures an anti-slip effect, providing a reliable grip during use.
  • [Ergonomic Anti-Slip Handle] - Designed with a user-friendly anti-slip handle at the tool's end, featuring a concave shape and grainy surface. This ensures ample operating space for your hands, enabling safe and smooth completion of disassembly and repair tasks.
  • [Exceptional Service] - With a commitment to delivering top-notch car accessories and services to 40 million customers worldwide, each of our spark plug wire pliers undergoes meticulous testing and inspection before delivery. Should you have any inquiries, our dedicated customer service team is ready to assist you.
SaleRank No. #8
Performance Tool W80519 Adjustable Spark Plug Boot & Wire Remover, Remove Spark Plugs Boots Without Removing The Terminals
  • ADJUSTABLE JAWS: The Performance Tool W80519 features jaws that can be adjusted to five different positions, making it easier to access and remove spark plug boots.
  • VINYL COATING: The jaws and handles of this tool are coated in red vinyl, providing a comfortable grip and ensuring a secure hold on the boot.
  • CUSHIONED JAWS: The cushioned jaws of this spark plug boot remover can grip the boot from either the side or straight on, preventing damage to the wire and the boot.
  • EASY TO USE: With this tool, you can remove the spark plug boot without pulling off the metal terminal ends of the wires, making it ideal for small engine compartments.
  • PLIER STYLE: This boot puller has a plier style design that provides reach and the right angle needed to remove even the hardest-to-reach spark plug boots.
SaleRank No. #9
AUPREX Car Spark Plug Wire Removal Pliers Tool, High Voltage Cylinder Cable Removal Clamp Tool,Spark Plug Boot Removal Tool
  • MAIN FUNCTIONS: This spark plug pliers is used to remove the spark plug high voltage wire,replace the spark plugs and repair the car.
  • EASY TO USE: Simply use the pliers to grip the spark plug line with socket head and remove or replace.
  • REASONABLE DESIGN: The handle of the pliers is covered with a friendly rubber which provides a comfortable and soft grip during the operation. The long handle also make your operation easily in some tight spaces. The socket shape head will also protect the spark plug coil from being damaged.
  • MATERIAL: The body of this pliers is made of carbon steel which will ensure the durability and strength.
  • OTHER FUNCTIONS: This spark plug removal pliers also can be used for other purposes such as remove the hose and other linesif the size is matched.
Rank No. #10
OEMTOOLS 25559 Adjustable Spark Plug Boot Pliers, Five Positions for Easy Access to Hard-to-Reach Spark Plug Boots, Damage-Free Removal, Mechanic Tools
  • ADJUSTABLE SPARK PLUG BOOT TOOL: Our spark plug boot removal tool is designed to adjust into 5 different positions for accessing hard-to-reach spark plug boots; Ideal spark plug boot pliers tool for use in tight spots
  • EASY TO USE: Easily adjust these spark plug pliers for removing spark plug boots by holding the handle and pulling the jaws into the position needed to access the spark plug boots; Convenient spark plug boot remover tool for auto mechanics
  • DAMAGE-FREE REMOVAL: This spark plug boot puller features rubber dipped jaws that provide a secure grip for removal of spark plug boots without damaging them; Spark plug tool removes spark plug boots without damaging hoses or wires
  • STURDY JAWS: The jaws on this spark plug removal tool for boots are hardened, ensuring they will not bend while gripping and removing spark plug boots; Durable car boot remover tool is built to get the job done for years to come
  • COMFORTABLE GRIP: Outfitted with a dipped handle, these automotive pliers for spark plug boots provide a comfortable and sure grip as you work in tight spaces to remove hard-to-access spark plug boots to change spark plugs
SaleRank No. #11
Lisle 51410 Offset Spark Plug Boot Removal Plier
  • The 5/8" opening of the pliers properly fits spark plug wire boots to prevent damage to spark plug wires
  • Tool is 7" long with offset tip to fit in tight spots
  • Package Dimensions: 16.8 " L x 15.9 " W x 5.4 " H
  • Package Weight: 0.204 kilograms
Rank No. #12
ARES 11054 - Spark Plug Plier Boot Removal Tool - Remove Hard to Reach Spark Plug Boots and Wires Without Damaging Them – 45 Degree Offset Jaws Offer Increased Range of Access
  • DESIGN: Made of durable heat treated alloy steel, these spark plug pliers feature 45 degree offset jaws that give you access to those spark plugs buried deep under the hood or in the tight spaces along the firewall, while applying even pressure to components. These pliers are designed to remove spark plug boots without damaging the surrounding wires, keeping both you and your vehicle safe.
  • QUALITY: Our spark plug pliers feature PVC-dipped coverings on both the jaws and handles, providing a more comfortable and sturdy grip in the hand and better control over the spark plug when gripping, without marring surfaces. **NOTE: Pliers should only be used when the engine is turned off.**
  • APPLICATION: These spark plug pliers will remove hard to reach spark plug boots without causing damage to the wires and without breaking your knuckles, or spark plugs covered in buildup. It's also great for putting the spark plug boot back on after you’ve replaced the spark plug, allowing you to finish the entire spark plug replacement easily with just one tool.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Spark Plug Plier Boot Removal Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
SaleRank No. #13
Spark Plug Removal Tool - Professional O Ring Nose Spark Plug Pliers with 11" Extended Design & Anti Slip Handle - Your Car Essentials Spark Plug Boot Removal Tool
  • 🪔 [Standard Specifications] - Our spark plug pliers have an overall length of 11 inch, a minimum opening width of 0.63 inch (5/8 inch), and a maximum opening width of 1.9 inch. The elongated design allows it to easily enter narrow and complex spaces for operation, improving your maintenance efficiency!
  • 🪔 [Perfect Disassembly Tool] - As a professional car tools, it is widely used for pulling and disassembling various small accessories on the vehicle body, such as spark plug high-voltage wires, spark plug covers, spark plug sheaths, hose clamps, vacuum pipes, fuel pipes, heater hoses, etc., bringing convenience to you.
  • 🪔 [High End Material] - The spark plug boot removal tool is made of high end carbon steel material,which is more solid, tensile, and durable than ordinary disassembly tools on the market. The internal serrated design also has an anti slip effect.
  • 🪔 [Anti Slip Handle] - We also made an ergonomic anti slip handle at the end of the spark plug wire removal tool. Its concave appearance and grainy surface can reserve sufficient operating space for the hands, allowing you to safely and smoothly complete disassembly and repair work.
  • 🪔 [Perfect Service] - We insist on providing the best car accessories and services for 40 million customers worldwide. Each of our spark plug wire pliers are carefully tested and inspected before delivery. If you have any questions, our customer service staff will be happy to help you.
Rank No. #14
PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool
  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC); Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD).
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end.
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side.
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck.
  • Material:The handle of ignition coil puller is made of hard plastic, which can reduce user fatigue, and improve productivity. Shaft and boot end constructed from stainless-steel for maximum strength and longevity.
Rank No. #15
QWORK Car Spark Plug Wire Removal Pliers Tool, Sleeve Type Spark Plug Puller + Round Spark Plug Pliers
  • High strength: Those clamps are made of carbon steel to ensure durability and strength.
  • Non-slip Handle: Ergonomic handle, comfortable and labor-saving.
  • Easy to use: Just use pliers to clamp the spark plug wire with sleeve head, it can be removed or replaced.
  • Easy to Reach: It can also be used for hoses and other objects. The long handle also allows you to easily operate in some small spaces.
  • Wide Usage: It is used to remove the spark plug high-voltage line, replace the spark plug and repair the car.
Rank No. #16
Sutekus Spark Plug Plier Spark Plug Boot Plier Puller Universal Car Spark Plug Boots and Wires Removal Tool (Offset Boot Plier)
  • O-shaped long-reach Pliers are ideal for removing and installing spark plugs, hoses, vacuum lines to aid confined space operation in automotive or mechanical repairs. *Note: Pliers should only be used when the engine is off.
  • Fit Size :11" long reach clamp plier for better reach into narrow areas. The jaw diameter of 5/8" and maximum opening size of 1-1/2" for gripping, twisting, pulling, and pushing the jaws to hold a hose or plug. Please make sure the size of the pliers is appropriate for your job before purchasing.
  • O-serrated Jaws with 30° Bend: Serrated jaws provide maximum grip strength. 30°scientific angle without cutter to ensure safe operation, will not damage parts.
  • Sturdy Material: high carbon steel forging with high-frequency quenching treatment, high hardness, rust prevention, durable & long service life. The ergonomic handle is made of premium engineered plastic for non-slip and comfortable grip.
  • Wide Application: Practical pliers for pulling spark plug covers and spark plug wires, extruding hose clamps, removing and installing spark plug leads, heater hoses, vacuum lines, fuel lines and other small parts on vehicles.
Rank No. #17
CRAFTSMAN CMMT98341 CRFT SPARK PLUG BOOT REMOVAL PLRS
  • EFFICIENT: Remove spark plug boots quickly and easily
  • PREVENTION: Specially shaped cushioned jaws helps prevent tearing of spark plug boot
  • COMFORT: Dipped handles for comfort and secure grip
SaleRank No. #18
Landhoow 4 Pieces 3/8 Inch Drive Magnetic Swivel Spark Plug Socket Set 14mm 16mm Thin Wall Socket 4 Inch 12 Inch Length 12 Point 360 Degree Swivel Spark Plug Removal Tool, CRV Steel
  • Complete Package: the set includes 4 magnetic swivel spark plug sockets, catering to a range of applications, designed in 4 sizes, including a 14mm 4 inch socket, 16mm 4 inch socket, 14mm 12 inch socket, and a 16mm 12 inch socket, 1 piece of each size, you need not worry about missing out on the right tool for your work
  • Durability and Strength: our spark plug socket set is made from chrome vanadium steel for the ideal combination of strength and durability, with a matte chrome finish, these tools offer durable resistance to wear and tear, the silver color not only adds aesthetic value, but also provides a corrosion free surface, ensuring that these tools will last for an extensive period
  • 360 Degree Swivel Design: the spark plug features a 360 degree swivel action for flexibility and easy access into tight spaces, making it easier to access the engine bay and remove and install the spark plug
  • Magnetic Core Design: our magnetic swivel socket set is equipped with a sturdy magnetic core, the magnet retains and protects the spark plug for easier installation, ensures not easy to lose the plug over time, and reduces damage
  • Easy to Use: the swivel thin wall socket kit is applied to remove and install spark plugs and requires no tightening or adjustment; It features a 12 point design for enhanced gripping power, knurled grip can help you keep a tight grip to reduce the possibility of slipping in the middle of a job and reduce the chance of hand fatigue

How Do You Buy The Best Jetta Spark Plug Boot Removal Tool?

Do you get stressed out thinking about shopping for a great Jetta Spark Plug Boot Removal Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Jetta Spark Plug Boot Removal Tool, which is why we have assembled a comprehensive list of the greatest Jetta Spark Plug Boot Removal Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jetta Spark Plug Boot Removal Tool that you consider buying. Your questions might include the following:

  • Is it worth buying an Jetta Spark Plug Boot Removal Tool?
  • What benefits are there with buying an Jetta Spark Plug Boot Removal Tool?
  • What factors deserve consideration when shopping for an effective Jetta Spark Plug Boot Removal Tool?
  • Why is it crucial to invest in any Jetta Spark Plug Boot Removal Tool, much less the best one?
  • Which Jetta Spark Plug Boot Removal Tool are good in the current market?
  • Where can you find information like this about Jetta Spark Plug Boot Removal Tool?

We’re convinced that you likely have far more questions than just these regarding Jetta Spark Plug Boot Removal Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Jetta Spark Plug Boot Removal Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jetta Spark Plug Boot Removal Tool. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Jetta Spark Plug Boot Removal Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jetta Spark Plug Boot Removal Tool currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Jetta Spark Plug Boot Removal Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Jetta Spark Plug Boot Removal Tool?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Jetta Spark Plug Boot Removal Tool.
  5. Customer Ratings: Number ratings grade Jetta Spark Plug Boot Removal Tool objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jetta Spark Plug Boot Removal Tool.
  7. Product Quality: You don’t always get what you pay for with an Jetta Spark Plug Boot Removal Tool, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Jetta Spark Plug Boot Removal Tool is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Jetta Spark Plug Boot Removal Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Jetta Spark Plug Boot Removal Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: