18 Best Otc 9312 of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Otc 9312 of 2022. Check our ranking below.
2,084 Reviews Scanned
Rank No. #1
OTC 4512 Stinger Internal and External Snap-Ring Pliers - 8 Piece Set
- OTC's heavy-gauge, tempered steel snap ring pliers feature fixed tips - no fumbling with tip replacement to suit a specific job necessary - and a simple thumbscrew for quick conversion from internal to external snap ring compatibility
- Bent tip pliers feature a less than 90 degree angle to provide added hand clearance for retaining rings in tight spots
- Ergonomic grips, rugged construction, and legendary OTC quality ensure our snap ring pliers will be comfortable to use for the long haul
- Set contains: No. 4512-1 Straight Tip Pliers with .090 tips, No. 4512-2 Bent Tip Pliers with .090 tips, No. 4512-3 Straight Tip Pliers with .070 tips, No. 4512-4 Bent Tip Pliers with .070 tips, No. 4512-5 Straight Tip Pliers with .047 tips
- No. 4512-6 Bent Tip Pliers with .047 tips, No. 4512-7 Straight Tip Pliers with .038 tips, No. 4512-8 Bent Tip Pliers with .038 tips, No. 4512-9 - Straight Tip Pick, No. 4512-10 - 90 Degree Tip Pick, Blow Molded Storage Case
Rank No. #2
OTC (1180) 10-Ton Capacity Push Puller Set
- 3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case; permits damage-free pulling of gears, bearings, harmonic balancers, and other parts with tapped holes
- Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery
- Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread
- No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included)
- No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws; spread range is 1-1/2 to 4-1/4 inches
Rank No. #3
OTC 9851 8-Point Wheel Bearing Locknut Socket Set with Tool Board
- OTC's comprehensive set of 8 Pt., 3/4 inch drive wheel bearing locknut sockets includes the 15 popular sizes your shop uses the most, plus 3 sizes of 6-lug tubular sockets for GM heavy-duty axles
- Wheel bearing locknuts are easy to remove or install with these specially designed sockets featuring high-strength steel construction that resists rounding out under high torque loads
- Set comes with a handy wall mount display board, labeled with size and part number, that keeps sockets contained and organized so they are ready when you need them
- Set includes the following 8 pt. sockets: No. 1903 2-3/8 inch, No. 1905 2-9/16 inch, No. 1907 3 inch, No. 1909 3-1/4 inch, No. 1911 3-1/2 inch, No. 1913 3-7/8 inch, No. 1917 4-3/8 inch, No. 1919 4-7/8 inch, No. 1924 3-3/8 inch
- No. 1925 3-3/4 inch, No. 1927 3-13/16 inch, No. 1933 2-7/8 inch, No. 1935 3-1/8 inch, No. 1937 2-3/4 inch, No. 1938 4-1/2 inch; 6-Lug Tubular Sockets: No. 1929 2-5/8 inch, No. 1930 2-7/8 inch, No. 1931 3-5/8 inch
Rank No. #4
OTC 1242 Cylinder Sleeve Removal Plate for Cummins N/HH and Mack ENDT Engines
- OTC Cylinder Sleeve Removal Plates are designed to work in conjunction with OTC manual (no. 1200) and hydraulic (1202 and 1203) cylinder sleeve puller sets
- For use when pulling sleeves on truck, bus, and tractor engines, as well as those in other vehicles; can be used on wet or dry sleeves; no need to remove head studs
- Cast and machined heavy duty steel for durability under repeated use
- Plate measures 4.980 O.D, 4.860 I.D. (+.010 -.000)
- For 4-7/8 inch bore Cummins N and NH series engines, and Mack ENDT - 672 engine
Rank No. #5
OTC 1039 13-Ton 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)
- OTC's 13-ton capacity, 2-jaw, gear and bearing puller enables you to remove and install parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 11 inches; maximum spread - 12 inches
- Jaw thickness - 9/16 inch; jaw width - 1 inch
- Center screw size - 13/16-16 x 12 inches long
Rank No. #6
OTC (927) 10 Ton Push Puller
- 10 tons of pulling power
- Has a reach of 8-3/8 inches
- Puller legs are 6-3/4 inches long
- Spread of 7-1/4 inches
- Can be used with several different attachments
Rank No. #7
OTC (1513B) 4 Ton Collision Repair Set
- 4 ton capacity
- Very competitively priced, yet high quality set that includes a single-speed hydraulic hand pump, hose, and ram
- Components snap together for quick setups to apply pushing, spreading, or pulling force
- Components include: hydraulic pump, hose, and ram; ram flat base; extension tubes (4); 1/2-ton spreader; tube coupling; ram toe; wedge head; serrated saddle; flex head; plunger toe; 90° wedge head; storage case
Rank No. #8
OTC 7121 Pencil-Type Fuel Injector Nozzle Puller for Case, Cat, GM, John Deere, Waukesha, and White
- OTC Fuel Injector Nozzle Puller
- Designed to remove the pencil-type fuel injector nozzles used in many agricultural and construction engines
- Slide hammer action gives a straight, even pull without damaging components
- Works on Case, Caterpillar, GM, John Deere, Waukesha, and White diesel engines equipped with pencil style injectors
- High-grade materials ensure quality performance over the lifetime of the tool
Rank No. #9
OTC 1675 13-Ton Capacity Puller Set
- This extremely versatile 13-ton capacity puller set removes gears, bearings, shafts, pinions, bearing outer races, and other tightly fitted parts
- Set includes a Push-Puller, Grip-O-Matic pullers, bearing pulling attachments, specialized pullers, and many accessories; work on all makes and models of cars and light trucks with this set
- Kit includes: No. 927 Push-Puller with 6-3/4" legs; No. 1101 15-3/4" legs for 927 (pair); No. 1022 2-Jaw Puller; No. 1024 2-Jaw Puller; No. 1035 2-Jaw Puller; No. 1039 2-Jaw Puller No. 7392 Gear and pulley puller 518 - Flange-type puller
- No. 7392 Gear and pulley puller; No. 518 Flange-Type Puller; No. 7403 Steering Wheel Puller; No. 1170 Pilot Bearing Puller; No. 1176 Slide Hammer Puller; No. 310A Pitman arm puller
- No. 8075 Step Plate Adapter Set; No. 8035 1/2-20 x 5/8-18 Int.Threaded Adapter (x2); 8044 Int. Threaded Adapter Set; No. 1152 Bearing Cup Pulling Attachment; Nos. 1121, 1122, & 1123 Bearing Splitters
Rank No. #10
OTC 1929 6-Lug Tubular Spanner Wrench for Wheel Bearing Locknuts on Chevrolet/GMC Heavy Duty Axles
- OTC's Six-Lug Tubular Spanner-Type Wrench removes and installs rear wheel bearing locknuts on heavy-duty axles
- Heavy-duty tool is designed for use with a 3/4 inch square-drive ratchet or breaker bar
- For use when servicing Chevrolet and GMC 5,200 to 7,200 lb. axles
- Socket has a 2-5/8 inch O.D.
SaleRank No. #11
OTC 1038 7-Ton 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical)
- OTC's 7-ton capacity, long 2/3-jaw, gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 8-3/4 inches; maximum spread - 11 inches
- Jaw thickness - 11/32 inch; jaw width - 1 inch
- Center screw size - 11/16-18 x 9 inches long
SaleRank No. #12
OTC 6593 Transmission Disconnect Set for Ford
- Tool snaps around cooler line and when pushed into the fitting releases the fitting
- The cooler line can then be removed
- 3/8" disconnect is used on 2003 - newer Ford Explorers with the 5R55W transmission
- 1/2" disconnect is used on 2003 - newer Ford Super Duty Trucks with the 4R100 transmission
- Similar to Ford Numbers 307-441 and 307-459
Rank No. #13
OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks
- Ideal tool for removing Heavy-Duty driveline U-Joints on Class 7 and 8 Trucks in conjunction with up to a 1 inch impact wrench (not included) - without the need for heat or hammering
- Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble
- Smooth, crisp threads allows for a lower, more consistent effort to rotate shaft; will not damage the driveshaft, yoke, bearing cups, or joints
- Major tool components are heat treated for improved strength and durability, ensuring a long, productive service life
- Fits Spicer driveline 1610, 1710, 1760, 1810, 1880; Spicer SPL 140, 170, and 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor RPL 20 and 25 'Permalube' series
Rank No. #14
OTC OTC-311883 Tube Small, 1 Pack
- The product is tube small
- Package Dimensions: 15.0 H x 5.5 L x 11.4 W (centimetres)
- Package Weight: 0.367 kilograms
- Country of Origin : United States
SaleRank No. #15
OTC (7894) Jeep/Dodge Ball Joint Service Adapter
- Use with the OTC 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints
- Removes and installs the offset ball joints used to change caster/camber
- Works with 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickup
Rank No. #16
OTC (1041) Mechanical Grip-O-Matic Puller - 13 Ton, 2/3 Jaw
- 13 ton capacity, 2/3 jaw
- Maximum reach of 11 inches
- Maximum spread of 12 inches
- Jaw thickness is 9/16 inch
- Jaw width is 1 inch
Rank No. #17
OTC (7501) Inner Tie Rod Wrench
- Universal wrench fits all styles of tie rods
- Works in place of tools that require several adapters
- Saves time and effort
- Heavy duty metal construction
Rank No. #18
OTC (1042) Mechanical Grip-O-Matic Puller - 13 Ton, Long 2/3 Jaw , black
- 13 ton capacity, long 2/3 jaw
- Maximum reach of 15-1/4 inches
- Maximum spread of 17 inches
- Jaw thickness is 9/16 inch
- Jaw width is 1 inch
How Do You Buy The Best Otc 9312?
Do you get stressed out thinking about shopping for a great Otc 9312? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Otc 9312, which is why we have assembled a comprehensive list of the greatest Otc 9312 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Otc 9312 that you consider buying. Your questions might include the following:
- Is it worth buying an Otc 9312?
- What benefits are there with buying an Otc 9312?
- What factors deserve consideration when shopping for an effective Otc 9312?
- Why is it crucial to invest in any Otc 9312, much less the best one?
- Which Otc 9312 are good in the current market?
- Where can you find information like this about Otc 9312?
We’re convinced that you likely have far more questions than just these regarding Otc 9312, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Otc 9312, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Otc 9312. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Otc 9312 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Otc 9312 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Otc 9312 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Otc 9312?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Otc 9312.
- Customer Ratings: Number ratings grade Otc 9312 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Otc 9312.
- Product Quality: You don’t always get what you pay for with an Otc 9312, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Otc 9312 is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Otc 9312 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Otc 9312 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.